If in case this is valid according to the latest datasheet, ignore this patch.
-- According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has bits 4 and 5 read-only and the value is always set as zero. So write '0' to these bits instead of writing '1'. Signed-off-by: Vikram Narayanan <vikram...@gmail.com> Cc: Jason Liu <r64...@freescale.com> Cc: Dirk Behme <dirk.be...@googlemail.com> --- board/freescale/mx6qarm2/imximage.cfg | 2 +- board/freescale/mx6qsabrelite/imximage.cfg | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index ceecbf9..bf941a3 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -167,7 +167,7 @@ DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF # enable AXI cache for VDOA/VPU/IPU -DATA 4 0x020e0010 0xF00000FF +DATA 4 0x020e0010 0xF00000CF # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg index c389427..62498ab 100644 --- a/board/freescale/mx6qsabrelite/imximage.cfg +++ b/board/freescale/mx6qsabrelite/imximage.cfg @@ -164,7 +164,7 @@ DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF # enable AXI cache for VDOA/VPU/IPU -DATA 4 0x020e0010 0xF00000FF +DATA 4 0x020e0010 0xF00000CF # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F -- 1.7.4.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot