On 21/06/2012 03:15, Tom Rini wrote:
> On Thu, Jun 14, 2012 at 10:29:47AM +0200, Stefano Babic wrote:
>
Hi Tom,
>> Signed-off-by: Stefano Babic <sba...@denx.de>
> [snip]
>> +static GraphicDevice panel;
>> +static const struct panel_config lcd_cfg = {
>> + .timing_h = 0x01101d1b, /* Horizontal timing */
>> + .timing_v = 0x01400b02, /* Vertical timing */
>> + .pol_freq = 0x00023000, /* Pol Freq */
>> + .divisor = 0x0001000d, /* 33Mhz Pixel Clock */
>> + .lcd_size = ((YRES - 1) << 16 | (XRES - 1)),
>> + .panel_type = 0x01, /* TFT */
>> + .data_lines = 0x03, /* 24 Bit RGB */
>> + .load_mode = 0x02 /* Frame Mode */
>> +};
>
> You need #if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
> type testing here[1] that the mt_ventoux board patch has. Shall I or
> will you v2? And I'll sanity test this on omap3_beagle tomorrow, but I
> suspect it's fine :)
I discussed with Anatolji about the patches and they need to be rebased
and reworked - a v2 is necessary !
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
