Thanks Wolfgang, I have gone through the FAQ section, this FAQ only talks about the condition where the other Uboot is in RAM but what I am thinking is to boot the Uboot from the flash location by another running Uboot.
for example if my board flash starts from 0xC000_0000 to 0xCFFF_FFFF and the first Uboot-1 is programmed @ 0xC800_0000 and second Uboot-2 is programmed @0xC500_0000 on reset Uboot-1 starts from flash and load it self to RAM and boots up and from there is it possible to boot Uboot-2 by using * go* cmd or in any other way. Regards, ISHWAR On Wed, Jun 27, 2012 at 7:19 PM, Wolfgang Denk <w...@denx.de> wrote: > Dear Ishwar Saunshi, > > In message < > cakd3hysshg8+xnx1yqnvddlyqupgajc-lmg1qz32cy5ebm6...@mail.gmail.com> you > wrote: > > > > I am really curiuos to see if U-boot can boot another version or another > > Uboot burnt in flash ? > > Its like having 2 images of U-boot which can boot each other if it is > > possible can any one of you hint me how I can achive this. I tried to > > relocate the Uboot and burned on to the flash in 2 different loacation > > however when I try to do "go <U-boot effective address>" it ends up in > TLB > > error in early stage of flash execution. > > In general, this is not possible. This topic is covered in the FAQ > here: > > http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM > > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > "Out of register space (ugh)" > - vi >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot