Hi Fabio, thank you very much for your reply.
> With these values you can create a correct imximage.cfg file for mx35pdk. Thank you, I'll try my best. >> $ ./tools/mkimage -n ./board/freescale/mx35pdk/imximage.cfg -T >> imximage -e 0xA0000000 -d u-boot.bin u-boot.imx Can you tell me which address I have to append to the -e switch of the mkimage program? I think that my choice (0xA0000000) is incorrect since it is /CS0 memory region of the WEIM. Is it 0x10000000 for internal RAM? And if so, do I have to change the following define within "include/configs/mx35pdk.h", too? /* Set TEXT at the beginning of the NOR flash */ #define CONFIG_SYS_TEXT_BASE 0xA0000000 > So my suggestion for you is to try to boot from internal boot mode first. Try > booting from SD card first as this would be easier. Could you please give a short explanation, why it is easier to boot from SD than from serial NOR? > Regards, > Fabio Estevam Thank you very much! With best regards Michael Hornung _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
