Hello,
I have connected USB hard disk to P1020RB
and in command prompt(u-boot) i used
command
=> usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
=> usb dev
USB device 0: Vendor: Seagate Rev: 0130 Prod: Portable
Type: Hard Disk
Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
and USB got detected.
but If i used the same command in our custom board
=> usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
=> usb dev
USB device -1: device type unknown
How do resolve this issue and why the device is not detecting my USB
hard disk.?
manukumar
signal-networks
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
