The BR_PHYS_ADDR(x) macro was missing parentheses around "x" in the macro
definition, so callers had to supply their own parenthesis.

Signed-off-by: Timur Tabi <ti...@freescale.com>
---
 arch/powerpc/include/asm/fsl_lbc.h |    6 +++---
 include/configs/MPC8536DS.h        |    9 ++++-----
 include/configs/MPC8548CDS.h       |    3 +--
 include/configs/MPC8572DS.h        |    9 ++++-----
 include/configs/P1022DS.h          |    2 +-
 include/configs/P2020DS.h          |    9 +++++----
 include/configs/corenet_ds.h       |    2 +-
 include/configs/p1_p2_rdb_pc.h     |    4 ++--
 8 files changed, 21 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/include/asm/fsl_lbc.h 
b/arch/powerpc/include/asm/fsl_lbc.h
index 2a23d84..d1def75 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -82,10 +82,10 @@ void lbc_sdram_init(void);
 
 /* Convert an address into the right format for the BR registers */
 #if defined(CONFIG_PHYS_64BIT) && !defined(CONFIG_FSL_ELBC)
-#define BR_PHYS_ADDR(x)        ((unsigned long)((x & 0x0ffff8000ULL) | \
-                                        ((x & 0x300000000ULL) >> 19)))
+#define BR_PHYS_ADDR(x)        \
+       ((u32)(((x) & 0x0ffff8000ULL) | (((x) & 0x300000000ULL) >> 19)))
 #else
-#define BR_PHYS_ADDR(x) (x & 0xffff8000)
+#define BR_PHYS_ADDR(x) ((u32)(x) & 0xffff8000)
 #endif
 
 /* OR - Option Registers
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index c26cb63..4a6b64f 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -217,8 +217,7 @@
 #endif
 
 #define CONFIG_FLASH_BR_PRELIM \
-               (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
-                | BR_PS_16 | BR_V)
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
 
 #define CONFIG_SYS_BR1_PRELIM \
@@ -380,14 +379,14 @@
 #endif
 
 #define CONFIG_SYS_BR4_PRELIM \
-               (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)) \
+               (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
                | BR_V)                 /* valid */
 #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR5_PRELIM \
-               (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \
+               (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
@@ -395,7 +394,7 @@
 #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
 #define CONFIG_SYS_BR6_PRELIM \
-               (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \
+               (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                | BR_PS_8               /* Port Size = 8 bit */ \
                | BR_MS_FCM             /* MSEL = FCM */ \
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 1a6ba69..82bbb3e 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -189,8 +189,7 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #define CONFIG_SYS_BR0_PRELIM \
-       (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x800000)) \
-       | BR_PS_16 | BR_V)
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V)
 #define CONFIG_SYS_BR1_PRELIM \
        (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index d7910e1..eeb9a8d 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -205,8 +205,7 @@
 
 
 #define CONFIG_FLASH_BR_PRELIM \
-       (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
-       | BR_PS_16 | BR_V)
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
 
 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | 
BR_PS_16 | BR_V)
@@ -376,20 +375,20 @@
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address 
*/
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #endif
-#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 
0x40000))\
+#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 
0x40000) \
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
 #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 
0x80000))\
+#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 
0x80000)\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
                               | BR_V)                 /* valid */
 #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
-#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 
0xc0000))\
+#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 
0xc0000)\
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                               | BR_PS_8               /* Port Size = 8 bit */ \
                               | BR_MS_FCM             /* MSEL = FCM */ \
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 70d751d..ae7c90e 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -118,7 +118,7 @@
 #endif
 
 #define CONFIG_FLASH_BR_PRELIM  \
-       (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | 
BR_V)
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7)
 
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index f0eb029..5a25b56 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -239,7 +239,8 @@
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CONFIG_FLASH_BR_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 
0x8000000)) | BR_PS_16 | BR_V)
+#define CONFIG_FLASH_BR_PRELIM  \
+       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
 
 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | 
BR_PS_16 | BR_V)
@@ -342,20 +343,20 @@
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM  /* NAND Base Address 
*/
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM  /* NAND Options */
 
-#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 
0x40000))\
+#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 
0x40000) \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
 #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options 
*/
-#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 
0x80000))\
+#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 
0x80000) \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
                                | BR_V)                 /* valid */
 #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options 
*/
 
-#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 
0xc0000))\
+#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 
0xc0000) \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                | BR_PS_8               /* Port Size = 8bit */ \
                                | BR_MS_FCM             /* MSEL = FCM */ \
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 8ed37a5..976dfe9 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -211,7 +211,7 @@
 #endif
 
 #define CONFIG_SYS_FLASH_BR_PRELIM \
-               (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
+               (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
                 | BR_PS_16 | BR_V)
 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & 
~OR_GPCM_EHTR) \
                                        | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 9f2951d..f6677c8 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -357,7 +357,7 @@
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \
+#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
        | BR_PS_16 | BR_V)
 
 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
@@ -401,7 +401,7 @@
 #define CONFIG_SYS_NAND_U_BOOT_RELOC   0x00010000
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP        (CONFIG_SYS_NAND_U_BOOT_RELOC + 
0x10000)
 
-#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS)) \
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
        | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
        | BR_PS_8       /* Port Size = 8 bit */ \
        | BR_MS_FCM     /* MSEL = FCM */ \
-- 
1.7.3.4


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to