Micrel accidentally used the same part number
for the KS8721 and KSZ9021. So, both cannot be
in the same build of u-boot. Add a config option
to handle this.
Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
Acked-by: Vladimir Zapolskiy <v...@mleia.com>
---
v2: add ack
---
drivers/net/phy/micrel.c | 15 +++++++++++++--
include/configs/mx6qsabrelite.h | 1 +
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index e3043df..30f3264 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -35,6 +35,12 @@ static struct phy_driver KSZ804_driver = {
.shutdown = &genphy_shutdown,
};
+#ifndef CONFIG_PHY_MICREL_KSZ9021
+/*
+ * I can't believe Micrel used the exact same part number
+ * for the KSZ9021
+ * Shame Micrel, Shame!!!!!
+ */
static struct phy_driver KS8721_driver = {
.name = "Micrel KS8721BL",
.uid = 0x221610,
@@ -44,7 +50,9 @@ static struct phy_driver KS8721_driver = {
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
+#endif
+#ifdef CONFIG_PHY_MICREL_KSZ9021
/* ksz9021 PHY Registers */
#define MII_KSZ9021_EXTENDED_CTRL 0x0b
#define MII_KSZ9021_EXTENDED_DATAW 0x0c
@@ -127,12 +135,15 @@ static struct phy_driver ksz9021_driver = {
.startup = &ksz9021_startup,
.shutdown = &genphy_shutdown,
};
+#endif
int phy_micrel_init(void)
{
phy_register(&KSZ804_driver);
- phy_register(&KS8721_driver);
+#ifdef CONFIG_PHY_MICREL_KSZ9021
phy_register(&ksz9021_driver);
-
+#else
+ phy_register(&KS8721_driver);
+#endif
return 0;
}
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index feabc05..8623320 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -97,6 +97,7 @@
#define CONFIG_FEC_MXC_PHYADDR 6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
/* USB Configs */
#define CONFIG_CMD_USB
