On 13.07.2012 10:20, Schneider, Kolja wrote:
Hi Troy,
is here any specific reason for the "disable_giga" switch in the ksz9021 phy
driver? We're just having some issues here, most of the times we don't get the link up
with a gigabit connection. Anything else that caused trouble on your side, apart from the
PHY ID mess?
The first versions of the SabreLite had an hardware issue:
"The current schematic has the center tap pin 9 of the MAG/JAC USB combo
to 3.3 filtered supply. Letting this pin float solves the problem."
https://wiki.linaro.org/Boards/MX6QSabreLite -> Gigabit Ethernet issue
Best regards
Dirk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
