Dear Andy Fleming, > On Wed, Jul 11, 2012 at 4:29 AM, Huang Changming-R66093 > > <r66...@freescale.com> wrote: > > Hi, Andy, > > There is not any feedback for very long time, > > Could it be applied to the u-boot? > > I'm afraid I have to reject this patch. We need to find a better > solution to the two problems: > > 1) We want to change cards and still have mmc commands work > 2) We don't want eMMC devices to be slowed down by constantly > re-initializing their cards. > > Normally, I would err on the side of #1, but there's a simple > workaround. If you replace the card, execute "mmc rescan", and the > card will be reinitialized. Please let me know if that workaround > doesn't work. I hope, in the future, we'll have some code which makes > both possible, by being able to detect that a card has been changed, > but for now I think the current system is reasonably satisfactory to > both cases #1 and #2.
Andy, I don't want to be a bastard, but do you happen to be overloaded? Or what is the exact reason your replies to patches are so slow? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
