On Sat, 14 Jul 2012, Luka Perkov wrote:
Hi kqt4at5v,
On Sat, Jul 14, 2012 at 04:51:13AM -0500, kqt4a...@gmail.com wrote:
NSA320>> printenv
bootargs=console=ttyS0,115200
mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
root=/dev/nfs rw init=/init
bootcmd=nand read.e 0x2000000 $(kernel_addr) 0xA00000; bootm 0x2000000
bootdelay=2
baudrate=115200
loads_echo=0
eth1addr=00:19:CB:00:51:82
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
nandEcc=1bit
MODEL_ID=DD01
PRODUCT_NAME=NSA-320
FEATURE_BIT=00
CONTRY_TYPE=FF
VENDOR_NAME=ZyXEL Communications Corp.
This is not from official uboot.
Either your kernel that you are trying to boot is is not good or you did
not set serial output correctly.
These variables are from the version of uboot that comes installed on
the Zyxel NSA320. It works ok but any other version of uboot does not. I
would like to fix that but I do not know how to trouble shoot this.
Richard
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
