An empty flush_dcache_range() was added into MPC85xx to work with drivers shared with other architecture. However, it is compiled only if USB is set, but it is required for other drivers (FSL_ESDHC), too.
Signed-off-by: Stefano Babic <sba...@denx.de> CC: Andy Fleming <aflem...@gmail.com> CC: Dirk Behme <dirk.be...@de.bosch.com> CC: Marek Vasut <ma...@denx.de> CC: Wolfgang Denk <w...@denx.de> --- arch/powerpc/cpu/mpc85xx/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 7d65aa7..34f6c54 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -131,7 +131,7 @@ COBJS += tlb.o COBJS += traps.o # Stub implementations of cache management functions for USB -COBJS-$(CONFIG_USB_EHCI) += cache.o +COBJS += cache.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot