The hardware design of the IB-NAS62x0 causes the SATA activity LEDs to be on when idle by default. Reverse the polarity of the activity LEDs in early init.
Signed-off-by: Simon Baatz <gmbno...@gmail.com> Cc: Luka Perkov <ub...@lukaperkov.net> Cc: Prafulla Wadaskar <prafu...@marvell.com> --- board/raidsonic/ib62x0/ib62x0.c | 3 +++ board/raidsonic/ib62x0/ib62x0.h | 4 ++++ 2 files changed, 7 insertions(+) diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c index 1164d6b..b7e6e41 100644 --- a/board/raidsonic/ib62x0/ib62x0.c +++ b/board/raidsonic/ib62x0/ib62x0.c @@ -23,6 +23,7 @@ #include <common.h> #include <miiphy.h> +#include <asm/io.h> #include <asm/arch/cpu.h> #include <asm/arch/kirkwood.h> #include <asm/arch/mpp.h> @@ -41,6 +42,8 @@ int board_early_init_f(void) IB62x0_OE_VAL_HIGH, IB62x0_OE_LOW, IB62x0_OE_HIGH); + /* Set SATA activity LEDs to default off */ + writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG); /* Multi-Purpose Pins Functionality configuration */ u32 kwmpp_config[] = { MPP0_NF_IO2, diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h index 0c30690..0118c2b 100644 --- a/board/raidsonic/ib62x0/ib62x0.h +++ b/board/raidsonic/ib62x0/ib62x0.h @@ -37,4 +37,8 @@ #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) +/* SATAHC related */ +#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C) +#define MVSATAHC_LED_POLARITY_CTRL (1 << 3) + #endif /* __IB62x0_H */ -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot