Dear Fabio Estevam, > Hi, > > I have just tried the latest U-boot and I am getting the following > when trying to load today's linux-next:
Noooohoooooooooo! :'-C Wakizashi, here I come ... > U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19) > > Freescale i.MX28 family at 454 MHz > BOOT: SSP SD/MMC #0, 3V3 > I2C: ready > DRAM: 128 MiB > MMC: MXS MMC: 0 > In: serial > Out: serial > Err: serial > Net: FEC0, FEC1 > Hit any key to stop autoboot: 0 > BOOTP broadcast 1 > BOOTP broadcast 2 > DHCP client bound to address 10.29.244.22 > Using FEC0 device > TFTP from server 10.29.240.146; our IP address is 10.29.244.22 > Filename 'uImage'. > Load address: 0x42000000 > Loading: ## Warning: gatewayip needed but not set > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > #### > done > Bytes transferred = 3343968 (330660 hex) > ## Booting kernel from Legacy Image at 42000000 ... > Image Name: Linux-3.5.0-next-20120727+ > Created: 2012-07-27 17:27:30 UTC > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3343904 Bytes = 3.2 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... data abort > pc : [<47fa74f0>] lr : [<47f86f44>] > sp : 47b80ca8 ip : 80338620 fp : 00000000 > r10: 42330660 r9 : 42000040 r8 : 47b80f68 > r7 : 42000000 r6 : 00000000 r5 : 47b80d1c r4 : 00000000 > r3 : ffffffff r2 : 0033061f r1 : 42330660 r0 : 80008000 > Flags: nzCv IRQs off FIQs off Mode SVC_32 > Resetting CPU ... > > resetting ... > > > If I use the latest stable kernel I get: > > U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19) > > Freescale i.MX28 family at 454 MHz > BOOT: SSP SD/MMC #0, 3V3 > I2C: ready > DRAM: 128 MiB > MMC: MXS MMC: 0 > In: serial > Out: serial > Err: serial > Net: FEC0, FEC1 > Hit any key to stop autoboot: 0 > BOOTP broadcast 1 > BOOTP broadcast 2 > DHCP client bound to address 10.29.244.22 > Using FEC0 device > TFTP from server 10.29.240.146; our IP address is 10.29.244.22 > Filename 'uImage'. > Load address: 0x42000000 > Loading: ## Warning: gatewayip needed but not set > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################### > done > Bytes transferred = 3170352 (306030 hex) > ## Booting kernel from Legacy Image at 42000000 ... > Image Name: Linux-3.4.6 > Created: 2012-07-26 23:30:59 UTC > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3170288 Bytes = 3 MiB > Load Address: 90008000 > Entry Point: 90008000 > Verifying Checksum ... OK > Loading Kernel Image ... > > Is there any patch missing or any ideas? I'm stuck at 20120723 for a bit ... I'll need to resync. Do you suspect uboot issue or kernel bug? > Thanks, > > Fabio Estevam Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot