Hi Marek, For future reference, please comment against:
Take a look at http://www.denx.de/wiki/U-Boot/ToolsPatchTracking On 07/29/2012 01:15 PM, Marek Vasut wrote: > Dear Graeme Russ, > > You might want to actually create an mbox of all these stacked patches so > people > can download and apply them and rebase their patches on top of them. Under 'Web Interface': "Download a patch set of all patches meeting a specific criteria (pass all stand-alone and inter-dependent tests and have been acked for example)" This could be an mbox file or an archive (.tgz) of patches >> Operation Sequence - Revised version of existing patch [snip] > > Yes? Maybe this should be applied at the place where the old patch was, > rather > than on top. Revised version of existing patch - Remove existing patch from patch stack - Insert new patch into patch stack at same location as the removed patch - Run each configured static test against the patch - Run each configured dynamic test against the patch - Record the results of the static and dynamic tests against the patch So yes, in place of the existing patch > Why not make committed like ... lavender or something </jab> ? :) :P > > [...] > The rest sounds quite cool. Good :) Regards, Graeme _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot