Hello Wolfgang,
The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614:
Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Holger Brunck (2):
i2c: deblock i2c bus also if accessed before realocation
km/common: remove printfs for i2c deblocking code
Rajeshwari Shinde (8):
EXYNOS: CLK: Add i2c clock
EXYNOS: Add I2C base address.
EXYNOS5: define EXYNOS5_I2C_SPACING
EXYNOS: PINMUX: Add pinmux support for I2C
I2C: Move struct s3c24x0_i2c to a common place.
I2C: Modify the I2C driver for EXYNOS5
I2C: Add support for Multi channel
CONFIG: SMDK5250: I2C: Enable I2C
Troy Kisky (25):
mxc_i2c: fix i2c_imx_stop
mxc_i2c: remove ifdef of CONFIG_HARD_I2C
mxc_i2c: create tx_byte function
mxc_i2c: clear i2sr before waiting for bit
mxc_i2c: create i2c_init_transfer
mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
mxc_i2c.c: code i2c_probe as a 0 length i2c_write
mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into
wait_for_sr_state
mxc_i2c: remove redundant read
mxc_i2c: place imx_start code inline
mxc_i2c: place i2c_reset code inline
mxc_i2c: don't disable controller after every transaction
mxc_i2c: change slave addr if conflicts with destination.
mxc_i2c: check for arbitration lost
mxc_i2c: add retries
mxc_i2c: add i2c_regs argument to i2c_imx_stop
mxc_i2c: prep work for multiple busses support
mxc_i2c: add bus recovery support
mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
iomux-v3: remove include of mx6x_pins.h
i.mx: iomux-v3.h: move to imx-common include directory
i.mx: iomux-v3.c: move to imx-common directory
i.mx53: add definition for I2C3_BASE_ADDR
imx-common: add i2c.c for bus recovery support
mx6qsabrelite: add i2c multi-bus support
arch/arm/cpu/armv7/exynos/clock.c | 33 ++
arch/arm/cpu/armv7/exynos/pinmux.c | 52 +++
arch/arm/cpu/armv7/imx-common/Makefile | 4 +-
arch/arm/cpu/armv7/imx-common/i2c.c | 99 ++++
arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c | 3 +-
arch/arm/cpu/armv7/mx5/clock.c | 20 +
arch/arm/cpu/armv7/mx6/Makefile | 2 +-
arch/arm/cpu/armv7/mx6/clock.c | 20 +
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/cpu.h | 5 +
arch/arm/include/asm/arch-exynos/periph.h | 8 +
arch/arm/include/asm/arch-mx5/clock.h | 1 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 2 +-
arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 10 -
.../asm/{arch-mx6 => imx-common}/iomux-v3.h | 0
arch/arm/include/asm/imx-common/mxc_i2c.h | 42 ++
board/freescale/mx6qarm2/mx6qarm2.c | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 54 ++-
board/keymile/common/common.c | 3 -
board/samsung/smdk5250/smdk5250.c | 30 ++-
common/cmd_i2c.c | 1 +
drivers/i2c/mxc_i2c.c | 477 +++++++++++---------
drivers/i2c/s3c24x0_i2c.c | 221 ++++++----
drivers/i2c/s3c24x0_i2c.h | 33 ++
drivers/usb/host/ehci-mx6.c | 2 +-
include/configs/mx6qsabrelite.h | 6 +-
include/configs/smdk5250.h | 10 +
29 files changed, 822 insertions(+), 321 deletions(-)
create mode 100644 arch/arm/cpu/armv7/imx-common/i2c.c
rename arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c (97%)
rename arch/arm/include/asm/{arch-mx6 => imx-common}/iomux-v3.h (100%)
create mode 100644 arch/arm/include/asm/imx-common/mxc_i2c.h
create mode 100644 drivers/i2c/s3c24x0_i2c.h
A "MAKEALL arm" with ELDK-5.2 compiled fine:
[hs@pollux u-boot-i2c]$ eldk-switch -r 5.2 armv5te
Setup for armv5te (using ELDK 5.2)
[hs@pollux u-boot-i2c]$ ./MAKEALL arm
[...]
--------------------- SUMMARY ----------------------------
Boards compiled: 303
----------------------------------------------------------
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
