On 09/07/2012 15:14, Veli-Pekka Peltola wrote: > This adds support for Bluegiga APX4 Development Kit. It is built around > Freescale i.MX28. Currently supported features are: ethernet, I2C, MMC, > RTC and USB. APX4 has only one ethernet port. > > Signed-off-by: Veli-Pekka Peltola <veli-pekka.pelt...@bluegiga.com> > Signed-off-by: Lauri Hintsala <lauri.hints...@bluegiga.com> > Cc: Stefano Babic <sba...@denx.de> > ---
Hi Veli-Pekka, hi Laurie, sorry for late review. And thanks for the remind ! > Changes after v1 from last December: > - Updating MAINTAINERS file which I missed last time > - Started to use SPL > - Increased size of environment on NAND > - Better commit message > > Our strategy to use fuses differs from other i.MX28 based boards. We store > serial number to CUST3. We don't have ethernet MAC address on fuses so our > customers could use their own address range. If I have some time later this > week or next week, I will do some refactorization on that so we could have > generic OTP reading function. Well, this sounds very promising .. ;-) > > MAINTAINERS | 4 + > board/bluegiga/apx4devkit/Makefile | 47 +++++++ > board/bluegiga/apx4devkit/apx4devkit.c | 150 ++++++++++++++++++++ > board/bluegiga/apx4devkit/spl_boot.c | 164 ++++++++++++++++++++++ > board/bluegiga/apx4devkit/u-boot.bd | 14 ++ > boards.cfg | 1 + > include/configs/apx4devkit.h | 238 > ++++++++++++++++++++++++++++++++ > 7 files changed, 618 insertions(+) > create mode 100644 board/bluegiga/apx4devkit/Makefile > create mode 100644 board/bluegiga/apx4devkit/apx4devkit.c > create mode 100644 board/bluegiga/apx4devkit/spl_boot.c > create mode 100644 board/bluegiga/apx4devkit/u-boot.bd > create mode 100644 include/configs/apx4devkit.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 54eeab7..5c3fc6e 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -784,6 +784,10 @@ Linus Walleij <linus.wall...@linaro.org> > integratorap various > integratorcp various > > +Veli-Pekka Peltola <veli-pekka.pelt...@bluegiga.com> > + > + apx4devkit i.MX28 > + > Luka Perkov <ub...@lukaperkov.net> I thought that your entry is not sorted, but really Linus' (and Helmut's before that) are in wrong order. Your is ok. > diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h > new file mode 100644 > index 0000000..9e7ead5 > --- /dev/null > +++ b/include/configs/apx4devkit.h > @@ -0,0 +1,238 @@ > +/* > + * Copyright (C) 2012 Bluegiga Technologies Oy > + * > + * Authors: > + * Veli-Pekka Peltola <veli-pekka.pelt...@bluegiga.com> > + * Lauri Hintsala <lauri.hints...@bluegiga.com> > + * > + * Based on m28evk.h: > + * Copyright (C) 2011 Marek Vasut <marek.va...@gmail.com> > + * on behalf of DENX Software Engineering GmbH > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include <asm/arch/regs-base.h> > + > +/* SoC configurations */ > +#define CONFIG_MX28 /* i.MX28 SoC */ > +#define CONFIG_MXS_GPIO /* GPIO control */ > +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ > + > +#define MACH_TYPE_APX4DEVKIT 3712 > +#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT You do not use MACH_TYPE_APX4DEVKIT at all, you could set directly CONFIG_MACH_TYPE. But it is not an issue, and you do not need to resend a new version. I see no problems in your patch - I will push it into the -next branch. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot