Signed-off-by: Srikanth Reddy Vintha <srikanth.re...@lntinfotech.com>
---
 arch/arm/cpu/armv7/msm7x27a/Makefile           |   53 ++++
 arch/arm/cpu/armv7/msm7x27a/acpuclock.c        |  252 +++++++++++++++
 arch/arm/cpu/armv7/msm7x27a/board.c            |   66 ++++
 arch/arm/cpu/armv7/msm7x27a/config.mk          |   21 ++
 arch/arm/cpu/armv7/msm7x27a/gpio.c             |  287 +++++++++++++++++
 arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S    |  118 +++++++
 arch/arm/cpu/armv7/msm7x27a/timer.c            |  127 ++++++++
 arch/arm/include/asm/arch-msm7x27a/gpio.h      |   47 +++
 arch/arm/include/asm/arch-msm7x27a/iomap.h     |  105 +++++++
 arch/arm/include/asm/arch-msm7x27a/mmc.h       |  399 ++++++++++++++++++++++++
 arch/arm/include/asm/arch-msm7x27a/proc_comm.h |   42 +++
 arch/arm/include/asm/arch-msm7x27a/sys_proto.h |   27 ++
 12 files changed, 1544 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/Makefile
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/acpuclock.c
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/board.c
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/config.mk
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/gpio.c
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S
 create mode 100644 arch/arm/cpu/armv7/msm7x27a/timer.c
 create mode 100644 arch/arm/include/asm/arch-msm7x27a/gpio.h
 create mode 100644 arch/arm/include/asm/arch-msm7x27a/iomap.h
 create mode 100644 arch/arm/include/asm/arch-msm7x27a/mmc.h
 create mode 100644 arch/arm/include/asm/arch-msm7x27a/proc_comm.h
 create mode 100644 arch/arm/include/asm/arch-msm7x27a/sys_proto.h

diff --git a/arch/arm/cpu/armv7/msm7x27a/Makefile 
b/arch/arm/cpu/armv7/msm7x27a/Makefile
new file mode 100644
index 0000000..5f493d7
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2012
+# Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+#
+# (C) Copyright 2010,2011 Nvidia Corporation.
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB    =  $(obj)lib$(SOC).o
+
+SOBJS-y        := lowlevel_init.o
+COBJS-y        := board.o
+COBJS-y        += timer.o
+COBJS-y        += acpuclock.o
+COBJS-y        += gpio.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
+
+all:    $(obj).depend $(LIB)
+
+$(LIB):        $(OBJS)
+       $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/msm7x27a/acpuclock.c 
b/arch/arm/cpu/armv7/msm7x27a/acpuclock.c
new file mode 100644
index 0000000..c144233
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/acpuclock.c
@@ -0,0 +1,252 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This source code is dual-licensed.  You may use it under the terms of the
+ * GNU General Public License version 2, or under the license below.
+ *
+ * Copyright (c) 2008, Google Inc.
+ * All rights reserved.
+ * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <asm/arch/iomap.h>
+#include <asm/io.h>
+#include <common.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/proc_comm.h>
+
+#define BIT(x) (1 << (x))
+
+#define A11S_CLK_CNTL_ADDR     (MSM_CSR_BASE + 0x100)
+#define A11S_CLK_SEL_ADDR      (MSM_CSR_BASE + 0x104)
+#define VDD_SVS_PLEVEL_ADDR    (MSM_CSR_BASE + 0x124)
+
+#define PLL2_MODE_ADDR         (MSM_CLK_CTL_BASE + 0x338)
+#define PLL4_MODE_ADDR         (MSM_CLK_CTL_BASE + 0x374)
+
+#define PLL_RESET_N                    BIT(2)
+#define PLL_BYPASSNL           BIT(1)
+#define PLL_OUTCTRL                    BIT(0)
+
+#define SRC_SEL_TCX0   0 /* TCXO */
+#define SRC_SEL_PLL1   1 /* PLL1: modem_pll */
+#define SRC_SEL_PLL2   2 /* PLL2: backup_pll_0 */
+#define SRC_SEL_PLL3   3 /* PLL3: backup_pll_1 */
+#define SRC_SEL_PLL4   6 /* PLL4: sparrow_pll */
+
+#define DIV_1          0
+#define DIV_2          1
+#define DIV_3          2
+#define DIV_4          3
+#define DIV_5          4
+#define DIV_6          5
+#define DIV_7          6
+#define DIV_8          7
+#define DIV_9          8
+#define DIV_10         9
+#define DIV_11         10
+#define DIV_12         11
+#define DIV_13         12
+#define DIV_14         13
+#define DIV_15         14
+#define DIV_16         15
+
+#define WAIT_CNT       100
+#define VDD_LEVEL      7
+#define MIN_AXI_HZ     120000000
+#define ACPU_800MHZ    41
+
+#define A11S_CLK_SEL_MASK 0x7 /* bits 2:0 */
+
+/* The stepping frequencies have been choosen to make sure the step
+ * is <= 256 MHz for both 7x27a and 7x25a targets.  The
+ * table also assumes the ACPU is running at TCXO freq and AHB div is
+ * set to DIV_1.
+ *
+ * To use the tables:
+ * - Start at location 0/1 depending on clock source sel bit.
+ * - Set values till end of table skipping every other entry.
+ * - When you reach the end of the table, you are done scaling.
+ */
+
+uint32_t const clk_cntl_reg_val_7627A[] = {
+       (WAIT_CNT << 16) | (SRC_SEL_PLL2 << 4)  | DIV_16,
+       (WAIT_CNT << 16) | (SRC_SEL_PLL2 << 12) | (DIV_8 << 8),
+       (WAIT_CNT << 16) | (SRC_SEL_PLL2 << 4)  | DIV_4,
+       (WAIT_CNT << 16) | (SRC_SEL_PLL2 << 12) | (DIV_2 << 8),
+
+       /* TODO: Fix it for 800MHz */
+#if 0
+       (WAIT_CNT << 16) | (SRC_SEL_PLL4 << 4)  | DIV_1,
+#endif
+};
+
+
+/* Using DIV_1 for all cases to avoid worrying about turbo vs. normal
+ * mode. Able to use DIV_1 for all steps because it's the largest AND
+ * the final value. */
+uint32_t const clk_sel_reg_val[] = {
+       DIV_1 << 1 | 1, /* Switch to src1 */
+       DIV_1 << 1 | 0, /* Switch to src0 */
+};
+
+/*
+ * Mask to make sure current selected src frequency doesn't change.
+ */
+uint32_t const clk_cntl_mask[] = {
+       0x0000FF00, /* Mask to read src0 */
+       0x000000FF  /* Mask to read src1 */
+};
+
+/* enum for SDC CLK IDs */
+enum {
+       SDC1_CLK  = 19,
+       SDC1_PCLK = 20,
+       SDC2_CLK  = 21,
+       SDC2_PCLK = 22,
+       SDC3_CLK  = 23,
+       SDC3_PCLK = 24,
+       SDC4_CLK  = 25,
+       SDC4_PCLK = 26
+};
+static uint8_t sdc_clk[] = {0, SDC1_CLK, SDC2_CLK, SDC3_CLK, SDC4_CLK};
+static uint8_t sdc_pclk[] = {0, SDC1_PCLK, SDC2_PCLK, SDC3_PCLK, SDC4_PCLK};
+
+
+void pll_enable(void *pll_mode_addr)
+{
+       uint32_t nVal;
+       /* Check status */
+       nVal =  readl(pll_mode_addr);
+       if (nVal & PLL_OUTCTRL)
+               return;
+
+       /* Put the PLL in reset mode */
+       nVal = 0;
+       nVal &= ~PLL_RESET_N;
+       nVal &= ~PLL_BYPASSNL;
+       nVal &= ~PLL_OUTCTRL;
+       writel(nVal, pll_mode_addr);
+
+       /* Put the PLL in warm-up mode */
+       nVal |= PLL_RESET_N;
+       nVal |= PLL_BYPASSNL;
+       writel(nVal, pll_mode_addr);
+
+       /* Wait for the PLL warm-up time */
+       udelay(50);
+
+       /* Put the PLL in active mode */
+       nVal |= PLL_RESET_N;
+       nVal |= PLL_BYPASSNL;
+       nVal |= PLL_OUTCTRL;
+       writel(nVal, pll_mode_addr);
+}
+
+void pll_request(unsigned pll, unsigned enable)
+{
+       if (!enable) {
+               /* Disable not supported */
+               return;
+       }
+       switch (pll) {
+       case 2:
+               pll_enable((void *)PLL2_MODE_ADDR);
+               return;
+       case 4:
+               pll_enable((void *)PLL4_MODE_ADDR);
+               return;
+       default:
+               return;
+       };
+}
+
+void acpu_clock_init(void)
+{
+       uint32_t i;
+       uint32_t val;
+       uint32_t size;
+
+       /* Increase VDD level to the final value. */
+       writel((1 << 7) | (VDD_LEVEL << 3), VDD_SVS_PLEVEL_ADDR);
+
+       udelay(1000);
+       const uint32_t *clk_cntl_reg_val = clk_cntl_reg_val_7627A;
+       size = ARRAY_SIZE(clk_cntl_reg_val_7627A);
+       pll_request(2, 1);
+       /* Read clock source select bit. */
+       val = readl(A11S_CLK_SEL_ADDR);
+       i = val & 1;
+
+       /* Jump into table and set every entry. */
+       for (; i < size; i++) {
+
+               val = readl(A11S_CLK_CNTL_ADDR);
+
+               /* Make sure not to disturb already used src */
+               val &= clk_cntl_mask[i%2];
+               val += clk_cntl_reg_val[i];
+               writel(val, A11S_CLK_CNTL_ADDR);
+
+               /* Would need a dmb() here but the whole address space is
+                * strongly ordered, so it should be fine.
+                */
+               val = readl(A11S_CLK_SEL_ADDR);
+               val &= ~(A11S_CLK_SEL_MASK);
+               val |= (A11S_CLK_SEL_MASK & clk_sel_reg_val[i%2]);
+               writel(val, A11S_CLK_SEL_ADDR);
+               udelay(1000);
+       }
+}
+
+#ifdef CONFIG_QC_MMC
+/* Configure MMC clock */
+void clock_config_mmc(uint32_t interface, uint32_t freq)
+{
+       uint32_t reg = 0;
+       if (mmc_clock_set_rate(sdc_clk[interface], freq) < 0)
+               printf("Failure setting clock rate for MCLK-"
+                                                   "clk_rate : %d\n", freq);
+
+       /* enable clock */
+       if (mmc_clock_enable_disable(sdc_clk[interface], MMC_CLK_ENABLE) < 0)
+               printf("Failure enabling MMC Clock!\n");
+
+       reg |= MMC_BOOT_MCI_CLK_ENABLE;
+       reg |= MMC_BOOT_MCI_CLK_ENA_FLOW;
+       reg |= MMC_BOOT_MCI_CLK_IN_FEEDBACK;
+       writel(reg, MMC_BOOT_MCI_CLK);
+}
+
+/* Intialize MMC clock */
+void clock_init_mmc(uint32_t interface)
+{
+       if (mmc_clock_enable_disable(sdc_pclk[interface], MMC_CLK_ENABLE) < 0)
+               printf("Failure enabling PCLK!\n");
+}
+#endif
+
diff --git a/arch/arm/cpu/armv7/msm7x27a/board.c 
b/arch/arm/cpu/armv7/msm7x27a/board.c
new file mode 100644
index 0000000..46fc2ea
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/board.c
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/sys_proto.h>
+
+
+DECLARE_GLOBAL_DATA_PTR;
+
+
+void set_vector_base(unsigned long addr)
+{
+       __asm__ volatile ("mcr   p15, 0, %0, c12, c0, 0" : : "r" (addr));
+}
+
+int dram_init(void)
+{
+       /*TODO: Memory size will change for booting kernel*/
+       gd->ram_size = 0x00100000;
+       return 0;
+}
+
+void dram_init_banksize(void)
+{
+       /* TODO: Memory layout will change for booting kernel
+        * This is intial bring up setup
+        */
+       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+}
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+       printf("Board: %s\n", sysinfo.board_string);
+       return 0;
+}
+#endif /* CONFIG_DISPLAY_BOARDINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init()
+{
+       __cpu_early_init();
+       return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/msm7x27a/config.mk 
b/arch/arm/cpu/armv7/msm7x27a/config.mk
new file mode 100644
index 0000000..f350c2b
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/config.mk
@@ -0,0 +1,21 @@
+#
+# (C) Copyright 2012
+# Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+#
+
+PLATFORM_CPPFLAGS += -march=armv7-a
diff --git a/arch/arm/cpu/armv7/msm7x27a/gpio.c 
b/arch/arm/cpu/armv7/msm7x27a/gpio.c
new file mode 100644
index 0000000..f5975e3
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/gpio.c
@@ -0,0 +1,287 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This source code is dual-licensed.  You may use it under the terms of the
+ * GNU General Public License version 2, or under the license below.
+ *
+ * Copyright (c) 2008, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/proc_comm.h>
+
+#define GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
+#define GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
+
+/* output value */
+#define GPIO_OUT_0              GPIO1_REG(0x00)  /* gpio  15-0  */
+#define GPIO_OUT_1              GPIO2_REG(0x00)  /* gpio  42-16 */
+#define GPIO_OUT_2              GPIO1_REG(0x04)  /* gpio  67-43 */
+#define GPIO_OUT_3              GPIO1_REG(0x08)  /* gpio  94-68 */
+#define GPIO_OUT_4              GPIO1_REG(0x0C)  /* gpio 106-95 */
+#define GPIO_OUT_5              GPIO1_REG(0x50)  /* gpio 132-107 */
+
+/* same pin map as above, output enable */
+#define GPIO_OE_0                GPIO1_REG(0x10)
+#define GPIO_OE_1                GPIO2_REG(0x08)
+#define GPIO_OE_2                GPIO1_REG(0x14)
+#define GPIO_OE_3                GPIO1_REG(0x18)
+#define GPIO_OE_4                GPIO1_REG(0x1C)
+#define GPIO_OE_5                GPIO1_REG(0x54)
+
+/* same pin map as above, input read */
+#define GPIO_IN_0                GPIO1_REG(0x34)
+#define GPIO_IN_1                GPIO2_REG(0x20)
+#define GPIO_IN_2                GPIO1_REG(0x38)
+#define GPIO_IN_3                GPIO1_REG(0x3C)
+#define GPIO_IN_4                GPIO1_REG(0x40)
+#define GPIO_IN_5                GPIO1_REG(0x44)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define GPIO_INT_EDGE_0        GPIO1_REG(0x60)
+#define GPIO_INT_EDGE_1        GPIO2_REG(0x50)
+#define GPIO_INT_EDGE_2        GPIO1_REG(0x64)
+#define GPIO_INT_EDGE_3        GPIO1_REG(0x68)
+#define GPIO_INT_EDGE_4        GPIO1_REG(0x6C)
+#define GPIO_INT_EDGE_5        GPIO1_REG(0xC0)
+
+/* same pin map as above, 1=positive 0=negative */
+#define GPIO_INT_POS_0  GPIO1_REG(0x70)
+#define GPIO_INT_POS_1  GPIO2_REG(0x58)
+#define GPIO_INT_POS_2  GPIO1_REG(0x74)
+#define GPIO_INT_POS_3  GPIO1_REG(0x78)
+#define GPIO_INT_POS_4  GPIO1_REG(0x7C)
+#define GPIO_INT_POS_5  GPIO1_REG(0xBC)
+
+/* same pin map as above, interrupt enable */
+#define GPIO_INT_EN_0    GPIO1_REG(0x80)
+#define GPIO_INT_EN_1    GPIO2_REG(0x60)
+#define GPIO_INT_EN_2    GPIO1_REG(0x84)
+#define GPIO_INT_EN_3    GPIO1_REG(0x88)
+#define GPIO_INT_EN_4    GPIO1_REG(0x8C)
+#define GPIO_INT_EN_5    GPIO1_REG(0xB8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define GPIO_INT_CLEAR_0   GPIO1_REG(0x90)
+#define GPIO_INT_CLEAR_1   GPIO2_REG(0x68)
+#define GPIO_INT_CLEAR_2   GPIO1_REG(0x94)
+#define GPIO_INT_CLEAR_3   GPIO1_REG(0x98)
+#define GPIO_INT_CLEAR_4   GPIO1_REG(0x9C)
+#define GPIO_INT_CLEAR_5   GPIO1_REG(0xB4)
+
+/* same pin map as above, 1=interrupt pending */
+#define GPIO_INT_STATUS_0  GPIO1_REG(0xA0)
+#define GPIO_INT_STATUS_1  GPIO2_REG(0x70)
+#define GPIO_INT_STATUS_2  GPIO1_REG(0xA4)
+#define GPIO_INT_STATUS_3  GPIO1_REG(0xA8)
+#define GPIO_INT_STATUS_4  GPIO1_REG(0xAC)
+#define GPIO_INT_STATUS_5  GPIO1_REG(0xB0)
+
+typedef struct gpioregs gpioregs;
+
+struct gpioregs {
+       unsigned out;
+       unsigned in;
+       unsigned int_status;
+       unsigned int_clear;
+       unsigned int_en;
+       unsigned int_edge;
+       unsigned int_pos;
+       unsigned oe;
+};
+
+static gpioregs GPIO_REGS[] = {
+       {
+               .out =          GPIO_OUT_0,
+               .in =           GPIO_IN_0,
+               .int_status =   GPIO_INT_STATUS_0,
+               .int_clear =    GPIO_INT_CLEAR_0,
+               .int_en =       GPIO_INT_EN_0,
+               .int_edge =     GPIO_INT_EDGE_0,
+               .int_pos =      GPIO_INT_POS_0,
+               .oe =           GPIO_OE_0,
+       },
+       {
+               .out =          GPIO_OUT_1,
+               .in =           GPIO_IN_1,
+               .int_status =   GPIO_INT_STATUS_1,
+               .int_clear =    GPIO_INT_CLEAR_1,
+               .int_en =       GPIO_INT_EN_1,
+               .int_edge =     GPIO_INT_EDGE_1,
+               .int_pos =      GPIO_INT_POS_1,
+               .oe =           GPIO_OE_1,
+       },
+       {
+               .out =          GPIO_OUT_2,
+               .in =           GPIO_IN_2,
+               .int_status =   GPIO_INT_STATUS_2,
+               .int_clear =    GPIO_INT_CLEAR_2,
+               .int_en =       GPIO_INT_EN_2,
+               .int_edge =     GPIO_INT_EDGE_2,
+               .int_pos =      GPIO_INT_POS_2,
+               .oe =           GPIO_OE_2,
+       },
+       {
+               .out =          GPIO_OUT_3,
+               .in =           GPIO_IN_3,
+               .int_status =   GPIO_INT_STATUS_3,
+               .int_clear =    GPIO_INT_CLEAR_3,
+               .int_en =       GPIO_INT_EN_3,
+               .int_edge =     GPIO_INT_EDGE_3,
+               .int_pos =      GPIO_INT_POS_3,
+               .oe =           GPIO_OE_3,
+       },
+       {
+               .out =          GPIO_OUT_4,
+               .in =           GPIO_IN_4,
+               .int_status =   GPIO_INT_STATUS_4,
+               .int_clear =    GPIO_INT_CLEAR_4,
+               .int_en =       GPIO_INT_EN_4,
+               .int_edge =     GPIO_INT_EDGE_4,
+               .int_pos =      GPIO_INT_POS_4,
+               .oe =           GPIO_OE_4,
+       },
+       {
+               .out =          GPIO_OUT_5,
+               .in =           GPIO_IN_5,
+               .int_status =   GPIO_INT_STATUS_5,
+               .int_clear =    GPIO_INT_CLEAR_5,
+               .int_en =       GPIO_INT_EN_5,
+               .int_edge =     GPIO_INT_EDGE_5,
+               .int_pos =      GPIO_INT_POS_5,
+               .oe =           GPIO_OE_5,
+       },
+};
+
+static gpioregs *find_gpio(unsigned n, unsigned *bit)
+{
+       if (n > 132)
+               return 0;
+       if (n > 106) {
+               *bit = 1 << (n - 107);
+               return GPIO_REGS + 5;
+       }
+       if (n > 94) {
+               *bit = 1 << (n - 95);
+               return GPIO_REGS + 4;
+       }
+       if (n > 67) {
+               *bit = 1 << (n - 68);
+               return GPIO_REGS + 3;
+       }
+       if (n > 42) {
+               *bit = 1 << (n - 43);
+               return GPIO_REGS + 2;
+       }
+       if (n > 15) {
+               *bit = 1 << (n - 16);
+               return GPIO_REGS + 1;
+       }
+       *bit = 1 << n;
+       return GPIO_REGS + 0;
+}
+
+int gpio_config(unsigned n, unsigned flags)
+{
+       gpioregs *r;
+       unsigned b;
+       unsigned v;
+       r = find_gpio(n, &b);
+       if (!r)
+               return -1;
+
+       v = readl(r->oe);
+       if (flags & GPIO_OUTPUT)
+               writel(v | b, r->oe);
+       else
+               writel(v & (~b), r->oe);
+       return 0;
+}
+
+void gpio_set(unsigned n, unsigned on)
+{
+       gpioregs *r;
+       unsigned b;
+       unsigned v;
+
+       r = find_gpio(n, &b);
+       if (r == 0)
+               return;
+
+       v = readl(r->out);
+       if (on)
+               writel(v | b, r->out);
+       else
+               writel(v & (~b), r->out);
+
+}
+
+int gpio_get(unsigned n)
+{
+       gpioregs *r;
+       unsigned b;
+       r = find_gpio(n, &b);
+       if (r == 0)
+               return 0;
+       return (readl(r->in) & b) ? 1 : 0;
+}
+
+#if 0
+void platform_config_interleaved_mode_gpios(void)
+{
+       /* configure EB2_CS1 through GPIO86 */
+       writel(GPIO_ALT_FUNC_PAGE_REG, 0x56);
+       writel(GPIO_ALT_FUNC_CFG_REG, 0x04);
+       /* configure the EBI2_BUSY1_N through GPIO115 */
+       writel(GPIO_ALT_FUNC_PAGE_REG, 0x73);
+       writel(GPIO_ALT_FUNC_CFG_REG, 0x08);
+}
+
+/* Enables all gpios passed in table*/
+int platform_gpios_enable(const struct msm_gpio *table, int size)
+{
+       int rc;
+       int i;
+       const struct msm_gpio *g;
+       for (i = 0; i < size; i++) {
+               g = table + i;
+               /* Enable gpio */
+               rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE);
+               if (rc)
+                       goto err;
+       }
+       return 0;
+err:
+       return rc;
+}
+#endif
+
+
diff --git a/arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S 
b/arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S
new file mode 100644
index 0000000..e6c4ac1
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S
@@ -0,0 +1,118 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+
+.text
+.code 32
+
+#define DSB .byte 0x4f, 0xf0, 0x7f, 0xf5
+#define ISB .byte 0x6f, 0xf0, 0x7f, 0xf5
+
+
+
+
+_TEXT_BASE:
+       .word   CONFIG_SYS_TEXT_BASE    @ sdram load addr from config file
+
+.global invalidate_dcache
+invalidate_dcache:
+       mov pc, lr
+
+       .align  5
+.globl lowlevel_init
+lowlevel_init:
+       mov     pc, lr                          @ back to arch calling code
+
+.global reset_cpu
+reset_cpu:
+_loop_forever:
+        b       _loop_forever
+
+
+
+.globl __cpu_early_init
+__cpu_early_init:
+
+        //; Zero out r0 for use throughout this code. All other GPRs
+        //; (r1-r3) are set throughout this code to help establish
+        //; a consistent startup state for any code that follows.
+        //; Users should add code at the end of this routine to establish
+        //; their own stack address (r13), add translation page tables, enable
+        //; the caches, etc.
+       push    {r5-r12,r14}
+        mov    r0,  #0x0
+       //; Initialize ASID to zero
+       mcr     p15, 0, r0, c13, c0, 1   //; WCP15_CONTEXTIDR r0
+
+       //; ICIALL to invalidate entire I-Cache
+       mcr     p15, 0, r0, c7, c5, 0   //; ICIALLU
+
+       //; Initialize ADFSR to zero
+       mcr     p15, 0, r0, c5, c1, 0   //; ADFSR   r0
+
+       //; Ensure the MCR's above have completed their operation before
+       //; continuing
+       DSB
+       ISB
+
+       //;-------------------------------------------------------------------
+       //; There are a number of registers that must be set prior to enabling
+       //; the MMU. The DCAR is one of these registers. We are setting
+       //; it to zero (no access) to easily detect improper setup in subsequent
+       //; code sequences
+       //;-------------------------------------------------------------------
+       //; Setup DACR (Domain Access Control Register) to zero
+       mcr     p15, 0, r0, c3, c0, 0   //; WCP15_DACR  r0
+
+       //;Make sure TLBLKCR is complete before continuing
+       ISB
+
+       //; Invalidate the UTLB
+       mcr     p15, 0, r0, c8, c7, 0     //; UTLBIALL
+
+       //; Make sure UTLB request has been presented to macro before continuing
+       ISB
+
+SYSI2:
+       //; Enable Z bit to enable branch prediction (default is off)
+       mrc     p15, 0, r2, c1, c0, 0     //; RCP15_SCTLR  r2
+       orr     r2, r2, #0x00000800
+       mcr     p15, 0, r2, c1, c0, 0     //; WCP15_SCTLR  r2
+
+       //; Make sure Link stack is initialized with branch and links to
+       //; sequential addresses
+       //; This aids in creating a predictable startup environment
+       bl        SEQ1
+SEQ1:   bl       SEQ2
+SEQ2:   bl       SEQ3
+SEQ3:   bl       SEQ4
+SEQ4:   bl       SEQ5
+SEQ5:   bl       SEQ6
+SEQ6:   bl       SEQ7
+SEQ7:   bl       SEQ8
+SEQ8:
+
+       ISB
+       pop     {r5-r12,pc}
+
+
+.ltorg
diff --git a/arch/arm/cpu/armv7/msm7x27a/timer.c 
b/arch/arm/cpu/armv7/msm7x27a/timer.c
new file mode 100644
index 0000000..0eb4ece
--- /dev/null
+++ b/arch/arm/cpu/armv7/msm7x27a/timer.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2008
+ * Texas Instruments
+ *
+ * Richard Woodruff <r-woodru...@ti.com>
+ * Syed Moahmmed Khasim <kha...@ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroe...@sysgo.de>
+ * Alex Zuepke <a...@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <ga...@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/arch/iomap.h>
+#include <asm/io.h>
+#include <common.h>
+#include <asm/types.h>
+#define TIMER_LOAD_VAL 0x21
+
+#define GPT_ENABLE_CLR_ON_MATCH_EN        2
+#define GPT_ENABLE_EN                     1
+#define DGT_ENABLE_CLR_ON_MATCH_EN        2
+#define DGT_ENABLE_EN                     1
+
+#define SPSS_TIMER_STATUS_DGT_EN    (1 << 0)
+
+
+#define READ_TIMER    readl(GPT_COUNT_VAL)
+
+static ulong timestamp;
+static ulong lastinc;
+#define DGT_HZ 6750000         /* Uses LPXO/4 (27.0 MHz / 4) */
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int timer_init(void)
+{
+       writel(0, DGT_ENABLE);
+       return 0;
+}
+/* timer without interrupts */
+ulong get_timer(ulong base)
+{
+       return get_timer_masked() - base;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+       unsigned int val;
+       usec = (usec * 33 + 1000 - 33) / 1000;
+
+       writel(0, GPT_CLEAR);
+       writel(0, GPT_ENABLE);
+       do {
+               val = 0;
+               val = readl(GPT_COUNT_VAL);
+       } while (val != 0);
+
+       writel(GPT_ENABLE_EN, GPT_ENABLE);
+       do {
+               val = 0;
+               val = readl(GPT_COUNT_VAL);
+       } while (val < usec) ;
+
+       writel(0, GPT_ENABLE);
+       writel(0, GPT_CLEAR);
+}
+
+ulong get_timer_masked(void)
+{
+       ulong now = READ_TIMER; /* current tick value */
+
+       if (lastinc <= now) {   /* normal mode (non roll) */
+               /* normal mode */
+               timestamp += now - lastinc;
+               /* move stamp forward with absolute diff ticks */
+       } else {                /* we have overflow of the count down timer */
+               timestamp += now + (TIMER_LOAD_VAL - lastinc);
+       }
+       lastinc = now;
+
+       return timestamp;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+       return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+       return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/include/asm/arch-msm7x27a/gpio.h 
b/arch/arm/include/asm/arch-msm7x27a/gpio.h
new file mode 100644
index 0000000..ca8c4af
--- /dev/null
+++ b/arch/arm/include/asm/arch-msm7x27a/gpio.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __GPIO_H
+#define __GPIO_H
+
+#ifndef GPIO_INPUT
+#define GPIO_INPUT     0x0000
+#endif
+#ifndef GPIO_OUTPUT
+#define GPIO_OUTPUT    0x0001
+#endif
+
+#define GPIO_LEVEL     0x0000
+#define GPIO_EDGE      0x0010
+
+#define GPIO_RISING    0x0020
+#define GPIO_FALLING   0x0040
+
+#define GPIO_HIGH      0x0020
+#define GPIO_LOW       0x0040
+
+#define GPIO_PULLUP    0x0100
+#define GPIO_PULLDOWN  0x0200
+
+int gpio_config(unsigned nr, unsigned flags);
+void gpio_set(unsigned nr, unsigned on);
+int gpio_get(unsigned nr);
+
+#endif
diff --git a/arch/arm/include/asm/arch-msm7x27a/iomap.h 
b/arch/arm/include/asm/arch-msm7x27a/iomap.h
new file mode 100644
index 0000000..4c9d434
--- /dev/null
+++ b/arch/arm/include/asm/arch-msm7x27a/iomap.h
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _PLATFORM_MSM7627A_IOMAP_H_
+#define _PLATFORM_MSM7627A_IOMAP_H_
+
+#define MSM_GPIO1_BASE 0xA9200000
+#define MSM_GPIO2_BASE 0xA9300000
+
+#define MSM_UART1_BASE 0xA9A00000
+#define MSM_UART2_BASE 0xA9B00000
+#define MSM_UART3_BASE 0xA9C00000
+
+#define MSM_VIC_BASE   0xC0000000
+#define MSM_GPT_BASE   0xC0100000
+
+#define GPT_REG(off)    (MSM_GPT_BASE + (off))
+
+#define GPT_MATCH_VAL     GPT_REG(0x0000)
+#define GPT_COUNT_VAL     GPT_REG(0x0004)
+#define GPT_ENABLE        GPT_REG(0x0008)
+#define GPT_CLEAR         GPT_REG(0x000C)
+#define DGT_MATCH_VAL     GPT_REG(0x0010)
+#define DGT_COUNT_VAL     GPT_REG(0x0014)
+#define DGT_ENABLE        GPT_REG(0x0018)
+#define DGT_CLEAR         GPT_REG(0x001C)
+#define SPSS_TIMER_STATUS GPT_REG(0x0034)
+
+#define MSM_CSR_BASE   0xC0100000
+#define MSM_CLK_CTL_BASE       0xA8600000
+
+#define MSM_SHARED_BASE 0x00100000
+
+#define MSM_SDC1_BASE   0xA0400000
+#define MSM_SDC3_BASE   0xA0600000
+
+#define MIPI_DSI_BASE                         (0xA1100000)
+#define DSI_PHY_SW_RESET                      (0xA1100128)
+#define REG_DSI(off)                          (MIPI_DSI_BASE + (off))
+#define MDP_BASE                              (0xAA200000)
+#define REG_MDP(off)                          (MDP_BASE + (off))
+#define DSIPHY_REGULATOR_BASE                 (0x2CC)
+#define DSIPHY_TIMING_BASE                    (0x260)
+#define DSIPHY_CTRL_BASE                      (0x290)
+#define DSIPHY_PLL_BASE                       (0x200)
+#define DSIPHY_STRENGTH_BASE                  (0x2A0)
+
+/* Range 0 - 4 */
+#define DSIPHY_REGULATOR_CTRL(x) REG_DSI(DSIPHY_REGULATOR_BASE + (x) * 4)
+/* Range 0 - 11 */
+#define DSIPHY_TIMING_CTRL(x)    REG_DSI(DSIPHY_TIMING_BASE + (x) * 4)
+/* Range 0 - 3 */
+#define DSIPHY_CTRL(x)           REG_DSI(DSIPHY_CTRL_BASE + (x) * 4)
+/* Range 0 - 2 */
+#define DSIPHY_STRENGTH_CTRL(x)  REG_DSI(DSIPHY_STRENGTH_BASE + (x) * 4)
+/* Range 0 - 19 */
+#define DSIPHY_PLL_CTRL(x)       REG_DSI(DSIPHY_PLL_BASE + (x) * 4)
+
+#define MDP_DMA_P_CONFIG               (0xAA290000)
+#define MDP_DMA_P_OUT_XY                      (0xAA290010)
+#define MDP_DMA_P_SIZE                        (0xAA290004)
+#define MDP_DMA_P_BUF_ADDR                    (0xAA290008)
+#define MDP_DMA_P_BUF_Y_STRIDE                (0xAA29000C)
+
+#define MDP_DSI_VIDEO_EN                      (0xAA2F0000)
+#define MDP_DSI_VIDEO_HSYNC_CTL               (0xAA2F0004)
+#define MDP_DSI_VIDEO_VSYNC_PERIOD            (0xAA2F0008)
+#define MDP_DSI_VIDEO_VSYNC_PULSE_WIDTH       (0xAA2F000C)
+#define MDP_DSI_VIDEO_DISPLAY_HCTL            (0xAA2F0010)
+#define MDP_DSI_VIDEO_DISPLAY_V_START         (0xAA2F0014)
+#define MDP_DSI_VIDEO_DISPLAY_V_END           (0xAA2F0018)
+#define MDP_DSI_VIDEO_BORDER_CLR              (0xAA2F0028)
+#define MDP_DSI_VIDEO_HSYNC_SKEW              (0xAA2F0030)
+#define MDP_DSI_VIDEO_CTL_POLARITY            (0xAA2F0038)
+#define MDP_DSI_VIDEO_TEST_CTL                (0xAA2F0034)
+
+#define MDP_DMA_P_START                       REG_MDP(0x0000C)
+#define MDP_DMA_S_START                       REG_MDP(0x00010)
+#define MDP_DISP_INTF_SEL                     REG_MDP(0x00038)
+#define MDP_MAX_RD_PENDING_CMD_CONFIG         REG_MDP(0x0004C)
+#define MDP_INTR_ENABLE                       REG_MDP(0x00020)
+#define MDP_INTR_CLEAR                       REG_MDP(0x00028)
+#define MDP_DSI_CMD_MODE_ID_MAP               REG_MDP(0x000A0)
+#define MDP_DSI_CMD_MODE_TRIGGER_EN           REG_MDP(0x000A4)
+
+#define MDP_TEST_MODE_CLK                     REG_MDP(0xF0000)
+#define MDP_INTR_STATUS                       REG_MDP(0x00054)
+#endif
diff --git a/arch/arm/include/asm/arch-msm7x27a/mmc.h 
b/arch/arm/include/asm/arch-msm7x27a/mmc.h
new file mode 100644
index 0000000..15a8cd4
--- /dev/null
+++ b/arch/arm/include/asm/arch-msm7x27a/mmc.h
@@ -0,0 +1,399 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __MMC_H__
+#define __MMC_H__
+
+#ifndef MMC_SLOT
+#define MMC_SLOT            0
+#endif
+
+#include <common.h>
+#include <part.h>
+#include <mmc.h>
+
+/*
+ * Define Macros for SDCC Registers
+ */
+/* 8 bit */
+#define MMC_BOOT_MCI_POWER                 0x000
+
+/* MCICMD output control - 6th bit */
+#ifdef PLATFORM_MSM7X30
+#define MMC_BOOT_MCI_OPEN_DRAIN            (1 << 6)
+#define MMC_BOOT_MCI_PWR_OFF               0x00
+#define MMC_BOOT_MCI_PWR_UP                0x01
+#define MMC_BOOT_MCI_PWR_ON                0x01
+#else
+#define MMC_BOOT_MCI_OPEN_DRAIN            (1 << 6)
+#define MMC_BOOT_MCI_PWR_OFF               0x00
+#define MMC_BOOT_MCI_PWR_UP                0x02
+#define MMC_BOOT_MCI_PWR_ON                0x03
+#endif
+
+/* 16 bits */
+#define MMC_BOOT_MCI_CLK                  0x004
+/* Enable MCI bus clock - 0: clock disabled 1: enabled */
+#define MMC_BOOT_MCI_CLK_ENABLE           (1 << 8)
+/* Disable clk o/p when bus idle- 0:always enabled 1:enabled when bus active */
+#define MMC_BOOT_MCI_CLK_PWRSAVE          (1 << 9)
+/* Enable Widebus mode - 00: 1 bit mode 10:4 bit mode 01/11: 8 bit mode */
+#define MMC_BOOT_MCI_CLK_WIDEBUS_MODE     (3 << 10)
+#define MMC_BOOT_MCI_CLK_WIDEBUS_1_BIT    0
+#define MMC_BOOT_MCI_CLK_WIDEBUS_4_BIT    (2 << 10)
+#define MMC_BOOT_MCI_CLK_WIDEBUS_8_BIT    (1 << 10)
+/* Enable flow control- 0: disable 1: enable */
+#define MMC_BOOT_MCI_CLK_ENA_FLOW         (1 << 12)
+/* Set/clear to select rising/falling edge for data/cmd output */
+#define MMC_BOOT_MCI_CLK_INVERT_OUT       (1 << 13)
+/* Select to lach data/cmd coming in falling/rising/feedbk/loopbk of MCIclk */
+#define MMC_BOOT_MCI_CLK_IN_FALLING       0x0
+#define MMC_BOOT_MCI_CLK_IN_RISING        (1 << 14)
+#define MMC_BOOT_MCI_CLK_IN_FEEDBACK      (2 << 14)
+#define MMC_BOOT_MCI_CLK_IN_LOOPBACK      (3 << 14)
+
+/* Bus Width */
+#define MMC_BOOT_BUS_WIDTH_1_BIT          0
+#define MMC_BOOT_BUS_WIDTH_4_BIT          2
+#define MMC_BOOT_BUS_WIDTH_8_BIT          3
+
+/* 32 bits */
+#define MMC_BOOT_MCI_ARGUMENT              0x008
+
+/* 16 bits */
+#define MMC_BOOT_MCI_CMD                   0x00C
+/* Command Index: 0 -5 */
+/* Waits for response if set */
+#define MMC_BOOT_MCI_CMD_RESPONSE         (1 << 6)
+/* Receives a 136-bit long response if set */
+#define MMC_BOOT_MCI_CMD_LONGRSP          (1 << 7)
+/* If set, CPSM disables command timer and waits for interrupt */
+#define MMC_BOOT_MCI_CMD_INTERRUPT        (1 << 8)
+/* If set waits for CmdPend before starting to send a command */
+#define MMC_BOOT_MCI_CMD_PENDING          (1 << 9)
+/* CPSM is enabled if set */
+#define MMC_BOOT_MCI_CMD_ENABLE           (1 << 10)
+/* If set PROG_DONE status bit asserted when busy is de-asserted */
+#define MMC_BOOT_MCI_CMD_PROG_ENA         (1 << 11)
+/* To indicate that this is a Command with Data (for SDIO interrupts) */
+#define MMC_BOOT_MCI_CMD_DAT_CMD          (1 << 12)
+/* Signals the next command to be an abort (stop) command. Always read 0 */
+#define MMC_BOOT_MCI_CMD_MCIABORT         (1 << 13)
+/* Waits for Command Completion Signal if set */
+#define MMC_BOOT_MCI_CMD_CCS_ENABLE       (1 << 14)
+/* If set sends CCS disable sequence */
+#define MMC_BOOT_MCI_CMD_CCS_DISABLE      (1 << 15)
+
+#define MMC_BOOT_MCI_RESP_CMD               0x010
+
+#define MMC_BOOT_MCI_RESP_0                 0x014
+#define MMC_BOOT_MCI_RESP_1                 0x018
+#define MMC_BOOT_MCI_RESP_2                 0x01C
+#define MMC_BOOT_MCI_RESP_3                 0x020
+
+#define MMC_BOOT_MCI_DATA_TIMER             0x024
+#define MMC_BOOT_MCI_DATA_LENGTH            0x028
+/* 16 bits */
+#define MMC_BOOT_MCI_DATA_CTL               0x02C
+/* Data transfer enabled */
+#define MMC_BOOT_MCI_DATA_ENABLE          (1 << 0)
+/* Data transfer direction - 0: controller to card 1:card to controller */
+#define MMC_BOOT_MCI_DATA_DIR             (1 << 1)
+/* Data transfer mode - 0: block data transfer 1: stream data transfer */
+#define MMC_BOOT_MCI_DATA_MODE            (1 << 2)
+/* Enable DM interface - 0: DM disabled 1: DM enabled */
+#define MMC_BOOT_MCI_DATA_DM_ENABLE       (1 << 3)
+/* Data block length in bytes (1-4096) */
+#define MMC_BOOT_MCI_BLKSIZE_POS          4
+#define MMC_BOOT_MCI_DATA_COUNT            0x030
+#define MMC_BOOT_MCI_STATUS                0x034
+/* Command response received - CRC check failed */
+#define MMC_BOOT_MCI_STAT_CMD_CRC_FAIL    (1 << 0)
+/* Data block sent/received - CRC check failed */
+#define MMC_BOOT_MCI_STAT_DATA_CRC_FAIL   (1 << 1)
+/* Command resonse timeout */
+#define MMC_BOOT_MCI_STAT_CMD_TIMEOUT     (1 << 2)
+/* Data timeout */
+#define MMC_BOOT_MCI_STAT_DATA_TIMEOUT    (1 << 3)
+/* Transmit FIFO underrun error */
+#define MMC_BOOT_MCI_STAT_TX_UNDRUN       (1 << 4)
+/* Receive FIFO overrun error */
+#define MMC_BOOT_MCI_STAT_RX_OVRRUN       (1 << 5)
+/* Command response received - CRC check passed */
+#define MMC_BOOT_MCI_STAT_CMD_RESP_END    (1 << 6)
+/* Command sent - no response required */
+#define MMC_BOOT_MCI_STAT_CMD_SENT        (1 << 7)
+/* Data end - data counter zero */
+#define MMC_BOOT_MCI_STAT_DATA_END        (1 << 8)
+/* Start bit not detected on all data signals in wide bus mode */
+#define MMC_BOOT_MCI_STAT_START_BIT_ERR   (1 << 9)
+/* Data block sent/received - CRC check passed */
+#define MMC_BOOT_MCI_STAT_DATA_BLK_END    (1 << 10)
+/* Command transfer in progress */
+#define MMC_BOOT_MCI_STAT_CMD_ACTIVE      (1 << 11)
+/* Data transmit in progress */
+#define MMC_BOOT_MCI_STAT_TX_ACTIVE       (1 << 12)
+/* Data receive in progress */
+#define MMC_BOOT_MCI_STAT_RX_ACTIVE       (1 << 13)
+/* Transmit FIFO half full */
+#define MMC_BOOT_MCI_STAT_TX_FIFO_HFULL   (1 << 14)
+/* Receive FIFO half full */
+#define MMC_BOOT_MCI_STAT_RX_FIFO_HFULL   (1 << 15)
+/* Transmit FIFO full */
+#define MMC_BOOT_MCI_STAT_TX_FIFO_FULL    (1 << 16)
+/* Receive FIFO full */
+#define MMC_BOOT_MCI_STAT_RX_FIFO_FULL    (1 << 17)
+/* Transmit FIFO empty */
+#define MMC_BOOT_MCI_STAT_TX_FIFO_EMPTY   (1 << 18)
+/* Receive FIFO empty */
+#define MMC_BOOT_MCI_STAT_RX_FIFO_EMPTY   (1 << 19)
+/* Data available in transmit FIFO */
+#define MMC_BOOT_MCI_STAT_TX_DATA_AVLBL   (1 << 20)
+/* Data available in receive FIFO */
+#define MMC_BOOT_MCI_STAT_RX_DATA_AVLBL   (1 << 21)
+/* SDIO interrupt indicator for wake-up */
+#define MMC_BOOT_MCI_STAT_SDIO_INTR       (1 << 22)
+/* Programming done */
+#define MMC_BOOT_MCI_STAT_PROG_DONE       (1 << 23)
+/* CE-ATA command completion signal detected */
+#define MMC_BOOT_MCI_STAT_ATA_CMD_CMPL    (1 << 24)
+/* SDIO interrupt indicator for normal operation */
+#define MMC_BOOT_MCI_STAT_SDIO_INTR_OP    (1 << 25)
+/* Commpand completion signal timeout */
+#define MMC_BOOT_MCI_STAT_CCS_TIMEOUT     (1 << 26)
+
+#define MMC_BOOT_MCI_STATIC_STATUS        (MMC_BOOT_MCI_STAT_CMD_CRC_FAIL| \
+               MMC_BOOT_MCI_STAT_DATA_CRC_FAIL| \
+               MMC_BOOT_MCI_STAT_CMD_TIMEOUT| \
+               MMC_BOOT_MCI_STAT_DATA_TIMEOUT| \
+               MMC_BOOT_MCI_STAT_TX_UNDRUN| \
+               MMC_BOOT_MCI_STAT_RX_OVRRUN| \
+               MMC_BOOT_MCI_STAT_CMD_RESP_END| \
+               MMC_BOOT_MCI_STAT_CMD_SENT| \
+               MMC_BOOT_MCI_STAT_DATA_END| \
+               MMC_BOOT_MCI_STAT_START_BIT_ERR| \
+               MMC_BOOT_MCI_STAT_DATA_BLK_END| \
+               MMC_BOOT_MCI_SDIO_INTR_CLR| \
+               MMC_BOOT_MCI_STAT_PROG_DONE| \
+               MMC_BOOT_MCI_STAT_ATA_CMD_CMPL |\
+               MMC_BOOT_MCI_STAT_CCS_TIMEOUT)
+
+#define MMC_BOOT_MCI_CLEAR                  0x038
+#define MMC_BOOT_MCI_CMD_CRC_FAIL_CLR     (1 << 0)
+#define MMC_BOOT_MCI_DATA_CRC_FAIL_CLR    (1 << 1)
+#define MMC_BOOT_MCI_CMD_TIMEOUT_CLR      (1 << 2)
+#define MMC_BOOT_MCI_DATA_TIMEOUT_CLR     (1 << 3)
+#define MMC_BOOT_MCI_TX_UNDERRUN_CLR      (1 << 4)
+#define MMC_BOOT_MCI_RX_OVERRUN_CLR       (1 << 5)
+#define MMC_BOOT_MCI_CMD_RESP_END_CLR     (1 << 6)
+#define MMC_BOOT_MCI_CMD_SENT_CLR         (1 << 7)
+#define MMC_BOOT_MCI_DATA_END_CLR         (1 << 8)
+#define MMC_BOOT_MCI_START_BIT_ERR_CLR    (1 << 9)
+#define MMC_BOOT_MCI_DATA_BLK_END_CLR     (1 << 10)
+#define MMC_BOOT_MCI_SDIO_INTR_CLR        (1 << 22)
+#define MMC_BOOT_MCI_PROG_DONE_CLR        (1 << 23)
+#define MMC_BOOT_MCI_ATA_CMD_COMPLR_CLR   (1 << 24)
+#define MMC_BOOT_MCI_CCS_TIMEOUT_CLR      (1 << 25)
+
+#define MMC_BOOT_MCI_INT_MASK0             0x03C
+#define MMC_BOOT_MCI_CMD_CRC_FAIL_MASK    (1 << 0)
+#define MMC_BOOT_MCI_DATA_CRC_FAIL_MASK   (1 << 1)
+#define MMC_BOOT_MCI_CMD_TIMEOUT_MASK     (1 << 2)
+#define MMC_BOOT_MCI_DATA_TIMEOUT_MASK    (1 << 3)
+#define MMC_BOOT_MCI_TX_OVERRUN_MASK      (1 << 4)
+#define MMC_BOOT_MCI_RX_OVERRUN_MASK      (1 << 5)
+#define MMC_BOOT_MCI_CMD_RESP_END_MASK    (1 << 6)
+#define MMC_BOOT_MCI_CMD_SENT_MASK        (1 << 7)
+#define MMC_BOOT_MCI_DATA_END_MASK        (1 << 8)
+#define MMC_BOOT_MCI_START_BIT_ERR_MASK   (1 << 9)
+#define MMC_BOOT_MCI_DATA_BLK_END_MASK    (1 << 10)
+#define MMC_BOOT_MCI_CMD_ACTIVE_MASK      (1 << 11)
+#define MMC_BOOT_MCI_TX_ACTIVE_MASK       (1 << 12)
+#define MMC_BOOT_MCI_RX_ACTIVE_MASK       (1 << 13)
+#define MMC_BOOT_MCI_TX_FIFO_HFULL_MASK   (1 << 14)
+#define MMC_BOOT_MCI_RX_FIFO_HFULL_MASK   (1 << 15)
+#define MMC_BOOT_MCI_TX_FIFO_FULL_MASK    (1 << 16)
+#define MMC_BOOT_MCI_RX_FIFO_FULL_MASK    (1 << 17)
+#define MMC_BOOT_MCI_TX_FIFO_EMPTY_MASK   (1 << 18)
+#define MMC_BOOT_MCI_RX_FIFO_EMPTY_MASK   (1 << 19)
+#define MMC_BOOT_MCI_TX_DATA_AVLBL_MASK   (1 << 20)
+#define MMC_BOOT_MCI_RX_DATA_AVLBL_MASK   (1 << 21)
+#define MMC_BOOT_MCI_SDIO_INT_MASK        (1 << 22)
+#define MMC_BOOT_MCI_PROG_DONE_MASK       (1 << 23)
+#define MMC_BOOT_MCI_ATA_CMD_COMPL_MASK   (1 << 24)
+#define MMC_BOOT_MCI_SDIO_INT_OPER_MASK   (1 << 25)
+#define MMC_BOOT_MCI_CCS_TIME_OUT_MASK    (1 << 26)
+
+#define MMC_BOOT_MCI_INT_MASK1              0x040
+
+#define MMC_BOOT_MCI_FIFO_COUNT            0x044
+
+#define MMC_BOOT_MCI_CCS_TIMER              0x0058
+
+#define MMC_BOOT_MCI_FIFO                   0x080
+
+/* OCR Register */
+#define MMC_BOOT_OCR_17_19                (1 << 7)
+#define MMC_BOOT_OCR_27_36                (0x1FF << 15)
+#define MMC_BOOT_OCR_SEC_MODE             (2 << 29)
+#define MMC_BOOT_OCR_BUSY                 (1 << 31)
+
+/* Commands type */
+#define MMC_BOOT_CMD_BCAST                (1 << 0)
+#define MMC_BOOT_CMD_BCAST_W_RESP         (1 << 1)
+#define MMC_BOOT_CMD_ADDRESS              (1 << 2)
+#define MMC_BOOT_CMD_ADDR_DATA_XFER       (1 << 3)
+
+/* Card Status bits (R1 register) */
+#define MMC_BOOT_R1_AKE_SEQ_ERROR         (1 << 3)
+#define MMC_BOOT_R1_APP_CMD               (1 << 5)
+#define MMC_BOOT_R1_RDY_FOR_DATA          (1 << 6)
+#define MMC_BOOT_R1_CURR_STATE_IDLE       (0 << 9)
+#define MMC_BOOT_R1_CURR_STATE_RDY        (1 << 9)
+#define MMC_BOOT_R1_CURR_STATE_IDENT      (2 << 9)
+#define MMC_BOOT_R1_CURR_STATE_STBY       (3 << 9)
+#define MMC_BOOT_R1_CURR_STATE_TRAN       (4 << 9)
+#define MMC_BOOT_R1_CURR_STATE_DATA       (5 << 9)
+#define MMC_BOOT_R1_CURR_STATE_RCV        (6 << 9)
+#define MMC_BOOT_R1_CURR_STATE_PRG        (7 << 9)
+#define MMC_BOOT_R1_CURR_STATE_DIS        (8 << 9)
+#define MMC_BOOT_R1_ERASE_RESET           (1 << 13)
+#define MMC_BOOT_R1_CARD_ECC_DISABLED     (1 << 14)
+#define MMC_BOOT_R1_WP_ERASE_SKIP         (1 << 15)
+#define MMC_BOOT_R1_ERROR                 (1 << 19)
+#define MMC_BOOT_R1_CC_ERROR              (1 << 20)
+#define MMC_BOOT_R1_CARD_ECC_FAILED       (1 << 21)
+#define MMC_BOOT_R1_ILLEGAL_CMD           (1 << 22)
+#define MMC_BOOT_R1_COM_CRC_ERR           (1 << 23)
+#define MMC_BOOT_R1_LOCK_UNLOCK_FAIL      (1 << 24)
+#define MMC_BOOT_R1_CARD_IS_LOCKED        (1 << 25)
+#define MMC_BOOT_R1_WP_VIOLATION          (1 << 26)
+#define MMC_BOOT_R1_ERASE_PARAM           (1 << 27)
+#define MMC_BOOT_R1_ERASE_SEQ_ERR         (1 << 28)
+#define MMC_BOOT_R1_BLOCK_LEN_ERR         (1 << 29)
+#define MMC_BOOT_R1_ADDR_ERR              (1 << 30)
+#define MMC_BOOT_R1_OUT_OF_RANGE          (1 << 31)
+
+/* Macros for Common Errors */
+#define MMC_BOOT_E_SUCCESS                0
+#define MMC_BOOT_E_FAILURE                1
+/* Not used..use instead TIMEOUT in include/mmc.h */
+#define MMC_BOOT_E_TIMEOUT                2
+#define MMC_BOOT_E_INVAL                  3
+#define MMC_BOOT_E_CRC_FAIL               4
+#define MMC_BOOT_E_INIT_FAIL              5
+#define MMC_BOOT_E_CMD_INDX_MISMATCH      6
+#define MMC_BOOT_E_RESP_VERIFY_FAIL       7
+#define MMC_BOOT_E_NOT_SUPPORTED          8
+#define MMC_BOOT_E_CARD_BUSY              9
+#define MMC_BOOT_E_MEM_ALLOC_FAIL         10
+#define MMC_BOOT_E_CLK_ENABLE_FAIL        11
+#define MMC_BOOT_E_CMMC_DECODE_FAIL       12
+#define MMC_BOOT_E_CID_DECODE_FAIL        13
+#define MMC_BOOT_E_BLOCKLEN_ERR           14
+#define MMC_BOOT_E_ADDRESS_ERR            15
+#define MMC_BOOT_E_DATA_CRC_FAIL          16
+#define MMC_BOOT_E_DATA_TIMEOUT           17
+#define MMC_BOOT_E_RX_OVRRUN              18
+#define MMC_BOOT_E_VREG_SET_FAILED        19
+#define MMC_BOOT_E_GPIO_CFG_FAIL          20
+#define MMC_BOOT_E_DATA_ADM_ERR           21
+
+/* EXT_CSD */
+#define MMC_BOOT_ACCESS_WRITE             0x3
+#define MMC_BOOT_EXT_CMMC_HS_TIMING       185
+#define MMC_BOOT_EXT_CMMC_BUS_WIDTH       183
+
+#define MMC_BOOT_EXT_USER_WP              171
+#define MMC_BOOT_EXT_ERASE_GROUP_DEF      175
+#define MMC_BOOT_EXT_HC_WP_GRP_SIZE       221
+#define MMC_BOOT_EXT_HC_ERASE_GRP_SIZE    224
+
+#define MMC_BOOT_US_PERM_WP_EN            2
+#define MMC_BOOT_US_PWR_WP_DIS            3
+
+#define MMC_BOOT_US_PERM_WP_DIS           (1<<4)
+#define MMC_BOOT_US_PWR_WP_EN             1
+
+/* For SD */
+#define MMC_BOOT_SD_HC_VOLT_SUPPLIED      0x000001AA
+#define MMC_BOOT_SD_NEG_OCR               0x00FF8000
+#define MMC_BOOT_SD_HC_HCS                0x40000000
+#define MMC_BOOT_SD_DEV_READY             0x80000000
+#define MMC_BOOT_SD_SWITCH_HS             0x80FFFFF1
+
+/* Data structure definitions */
+
+#define MMC_BOOT_XFER_MODE_BLOCK          0
+#define MMC_BOOT_XFER_MODE_STREAM         1
+#define MMC_BOOT_PROGRAM_ENABLED          2
+
+
+#define MMC_RCA 2
+
+#define MMC_BOOT_MAX_COMMAND_RETRY    1000
+#define MMC_BOOT_RD_BLOCK_LEN         512
+#define MMC_BOOT_WR_BLOCK_LEN         512
+
+/* We have 16 32-bits FIFO registers */
+#define MMC_BOOT_MCI_FIFO_DEPTH       16
+#define MMC_BOOT_MCI_HFIFO_COUNT      (MMC_BOOT_MCI_FIFO_DEPTH / 2)
+#define MMC_BOOT_MCI_FIFO_SIZE        (MMC_BOOT_MCI_FIFO_DEPTH * 4)
+
+#define MAX_PARTITIONS 64
+
+#define MMC_BOOT_CHECK_PATTERN        0xAA /* 10101010b */
+
+#define MMC_CLK_400KHZ                400000
+#define MMC_CLK_144KHZ                144000
+#define MMC_CLK_20MHZ                 20000000
+#define MMC_CLK_24MHZ                 24000000
+#define MMC_CLK_25MHZ                 25000000
+#define MMC_CLK_26MHZ                 26000000
+#define MMC_CLK_48MHZ                 48000000
+#define MMC_CLK_50MHZ                 49152000
+#define MMC_CLK_52MHZ                 52000000
+
+#define MMC_CLK_ENABLE      1
+#define MMC_CLK_DISABLE     0
+
+#if 0
+#define MSM_SDC1_BASE       0x12400000
+#define MSM_SDC2_BASE       0x12140000
+#define MSM_SDC3_BASE       0x12180000
+#define MSM_SDC4_BASE       0x121C0000
+#endif
+struct mmc_priv {
+       unsigned int instance;
+       unsigned int base;
+       unsigned int rd_timeout_ns;     /* for read timeout */
+};
+
+void mmc_boot_set_ios(struct mmc *mmc);
+int mmc_boot_send_command_map(struct mmc *mmc,
+                                       struct mmc_cmd *cmd,
+                                       struct mmc_data *data);
+unsigned long int mmc_boot_mci_reg(unsigned long base, unsigned long offset);
+unsigned int mmc_boot_main(struct mmc *mmc);
+
+extern void clock_config_mmc(uint32_t interface, uint32_t freq);
+extern void clock_init_mmc(uint32_t interface);
+#endif
+
diff --git a/arch/arm/include/asm/arch-msm7x27a/proc_comm.h 
b/arch/arm/include/asm/arch-msm7x27a/proc_comm.h
new file mode 100644
index 0000000..e919794
--- /dev/null
+++ b/arch/arm/include/asm/arch-msm7x27a/proc_comm.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __PROC_COMM_H_
+#define __PROC_COMM_H_
+
+void usb_clock_init(void);
+void lcdc_clock_init(unsigned rate);
+void mdp_clock_init(unsigned rate);
+void uart3_clock_init(void);
+void uart2_clock_init(void);
+void uart1_clock_init(void);
+void mddi_clock_init(unsigned num, unsigned rate);
+void reboot(unsigned reboot_reason);
+int mmc_clock_enable_disable(unsigned id, unsigned enable);
+int mmc_clock_set_rate(unsigned id, unsigned rate);
+int mmc_clock_get_rate(unsigned id);
+int gpio_tlmm_config(unsigned config, unsigned disable);
+int vreg_set_level(unsigned id, unsigned mv);
+int vreg_enable(unsigned id);
+int vreg_disable(unsigned id);
+
+#endif
+
+
diff --git a/arch/arm/include/asm/arch-msm7x27a/sys_proto.h 
b/arch/arm/include/asm/arch-msm7x27a/sys_proto.h
new file mode 100644
index 0000000..d5d5125
--- /dev/null
+++ b/arch/arm/include/asm/arch-msm7x27a/sys_proto.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2012
+ * Larsen & Toubro Infotech Ltd. <www.lntinfotech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+void pll8_enable(void);
+void clock_init(void);
+void __cpu_early_init(void);
+#endif
+
-- 
1.7.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to