Hi Stefano,
On 08/13/2012 16:24, Stefano Babic wrote:
> On 13/08/2012 16:18, Benoît Thébaudeau wrote:
> > The cache snooping feature of Freescale's eSDHC IP is not available
> > on i.MX, so
> > disable it globally for this architecture. This avoids setting
> > no_snoop for all
> > i.MX boards, and it prevents setting a reserved bit of a reserved
> > register if
> > fsl_esdhc_mmc_init() were used for an i.MX board.
> >
> > Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
> > Cc: Andy Fleming <aflem...@gmail.com>
> > Cc: Stefano Babic <sba...@denx.de>
> > Cc: Kim Phillips <kim.phill...@freescale.com>
> > ---
> > .../board/efikamx/efikamx.c | 4 ++--
> > .../board/esg/ima3-mx53/ima3-mx53.c | 2 +-
> > .../board/freescale/mx51evk/mx51evk.c | 4 ++--
> > .../board/freescale/mx53ard/mx53ard.c | 4 ++--
> > .../board/freescale/mx53evk/mx53evk.c | 4 ++--
> > .../board/freescale/mx53loco/mx53loco.c | 4 ++--
> > .../board/freescale/mx53smd/mx53smd.c | 2 +-
> > .../board/freescale/mx6qarm2/mx6qarm2.c | 4 ++--
> > .../board/freescale/mx6qsabrelite/mx6qsabrelite.c | 4 ++--
> > .../board/ttcontrol/vision2/vision2.c | 2 +-
> > .../drivers/mmc/fsl_esdhc.c | 2 ++
> > .../include/fsl_esdhc.h | 3 +++
> > 12 files changed, 22 insertions(+), 17 deletions(-)
> >
>
> Hi Benoît,
>
>
> > diff --git u-boot-4d3c95f.orig/drivers/mmc/fsl_esdhc.c
> > u-boot-4d3c95f/drivers/mmc/fsl_esdhc.c
> > index b6c969d..efdc6be 100644
> > --- u-boot-4d3c95f.orig/drivers/mmc/fsl_esdhc.c
> > +++ u-boot-4d3c95f/drivers/mmc/fsl_esdhc.c
> > @@ -479,9 +479,11 @@ static int esdhc_init(struct mmc *mmc)
> > while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
> > udelay(1000);
> >
> > +#ifndef ARCH_IMX
> > /* Enable cache snooping */
> > if (cfg && !cfg->no_snoop)
> > esdhc_write32(®s->scr, 0x00000040);
> > +#endif
> >
> > esdhc_write32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
> >
> > diff --git u-boot-4d3c95f.orig/include/fsl_esdhc.h
> > u-boot-4d3c95f/include/fsl_esdhc.h
> > index 0e26558..44f9f06 100644
> > --- u-boot-4d3c95f.orig/include/fsl_esdhc.h
> > +++ u-boot-4d3c95f/include/fsl_esdhc.h
> > @@ -26,6 +26,7 @@
> > #ifndef __FSL_ESDHC_H__
> > #define __FSL_ESDHC_H__
> >
> > +#include <config.h>
> > #include <asm/errno.h>
> > #include <asm/byteorder.h>
> >
> > @@ -167,7 +168,9 @@
> >
> > struct fsl_esdhc_cfg {
> > u32 esdhc_base;
> > +#ifndef ARCH_IMX
> > u32 no_snoop;
> > +#endif
> > };
>
> Why don't you get rid of no_snoop at all ? Using ARCH_IMX is not
> needed
> anymore.
Because I didn't know if disabling cache snooping could be a useful option or
not for architectures other than i.MX, so I preferred to leave it just in case,
even if it seems to be unused.
But if you are certain that disabling cache snooping can not be useful for
architectures other than i.MX (now or in the future, for boards in or out of
tree), I can completely remove no_snoop. Just tell me.
Perhaps you have a rule such as "remove any stuff that is unused in mainstream".
Best regards,
Benoît
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
