Dear Markus Hubig, On 27.07.12 11:16, Markus Hubig wrote: > Hi @all, > > one minor Problem I often read about in this list is some crappy / unreadable > console output at beginning of the U-Boot start procedure. Now I have the same > "visual" Problem. > > | H�NAND: 128 MiB > | *** Warning - bad CRC, using default environment > | > | In: serial > | Out: serial > | Err: serial > | Net: macb0 > | macb0: Starting autonegotiation... > | macb0: Autonegotiation timed out (status=0x7849) > | macb0: link down (status: 0x7849) > | Hit any key to stop autoboot: 0 > | ... > > Sometimes I get a good readable output, which looks like so: > > | U-Boot 2012.04.01-00003-gab465ef-dirty (Jul 23 2012 - 14:44:29) > | > | U-Boot code: 23F00000 -> 23F30464 BSS: -> 23F72128 > | CPU: AT91SAM9G20 > | Crystal frequency: 18.432 MHz > | CPU clock : 396.288 MHz > | Master clock : 132.096 MHz > | RAM Configuration: > | Bank #0: 20000000 64 MiB > | WARNING: Caches not enabled > | NAND: 128 MiB > | ... > > Has anyone an ideea how to fix this? Or what's the cause of it? Is it even > related to u-boot or is it something at91bootstrap is doing wrong?
can you please check http://patchwork.ozlabs.org/patch/107896/ It seems this patch was set to 'Accepted' but never applied to the master repository. Unfortunately this got lost in nirvana end of last year. I will apply it in any case but can you please check if it fixes your problem? Best regards Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot