Dear Lukasz,
On 12 September 2012 16:06, Lukasz Majewski <l.majew...@samsung.com> wrote:
> Hi Minkyu,
>
>> Support for multiple soft I2C buses.
>>
>> Multibus I2C support is achieved by defining get_multi_{sda|scl}_pin
>> functions to switch between multiple "soft" I2C buses.
>>
>> Common definition of I2C_X I2C buses is provided at <i2c.h>.
>>
>> TEST HW:
>> Samsung's Exynos4210 evt.0.1 - Trats development board
>>
>> Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
>> Cc: Heiko Schocher <h...@denx.de>
>> Cc: Minkyu Kang <mk7.k...@samsung.com>
>>
>> ---
>> Changes for v2:
>> - Common Samsung code has been put to
>> board/samsung/common/multi_i2c.c file
>> - I2C_{4|5} have been renamed to I2C_{0|1}
>> - *soft_i2c_name[] table has been removed
>> Changes for v3:
>> - None
>> Changes for v4:
>> - Common definitions of available I2C buses are now defined at <i2c.h>
>> - Compatibility layer (I2C_0) has been added temporarily to not break
>> the Trats I2C communication with PMIC. It will be removed when
>> redesigned PMIC will be posted
>> ---
>
> Can you evaluate those patches.
>
> Those were acked-by Heiko already.
>
OK.
please wait few days.
I will check pending patches soon.
Thanks.
Minkyu Kang.
--
from. prom.
www.promsoft.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
