On Wed, 12 Sep 2012 14:17:30 -0700 "Ira W. Snyder" <i...@ovro.caltech.edu> wrote:
> From: "Ira W. Snyder" <i...@ovro.caltech.edu> > > This series improves the hardware support for the Freescale MPC8308RDB board. > > Optional support for the SPI pins routed to header J8 is added for testing SPI > flash chips. This was tested with a Spansion S25FL256S1. This is not enabled > by default, because it breaks TSEC2 due to a pinmux conflict. > > Support for the onboard eSDHC MMC/SD controller is added. > > The SPI controller driver is fixed so that it works with MPC8308RDB (probably > all 83xx boards are broken before this fix). Without the fix, the waveforms > generated by the driver are incorrect (confirmed with an oscilloscope). > > Ira W. Snyder (5): > mpc8xxx_spi: fix SPI support on MPC8308RDB > mpc8308rdb: add support for Spansion SPI flash on header J8 > spansion: add support for S25FL256S1 > mpc8308rdb: add support for FIT images > mpc8308rdb: add support for eSDHC MMC controller > > board/freescale/mpc8308rdb/mpc8308rdb.c | 57 > +++++++++++++++++++++++++++++++ > drivers/mtd/spi/spansion.c | 8 ++++ > drivers/spi/mpc8xxx_spi.c | 4 ++ > include/configs/MPC8308RDB.h | 31 +++++++++++++++++ > 4 files changed, 100 insertions(+), 0 deletions(-) all 5 patches applied to mpc83xx master, after adding #include the fsl_esdhc header to prevent implicit declarations of fsl_esdhc_mmc_init() and fdt_fixup_esdhc(). Note: couldn't find a dedicated maintainer for mtd/spi, so carried those with since they looked pretty straightforward. Thanks Ira, Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot