Rework the emulation of serial console via JTAG from simple ad-hoc
implementation of serial port routines to CONFIG_SERIAL_MULTI and
enable CONFIG_SERIAL_MULTI unconditionally for blackfin.
In order for the JTAG serial console to take precedence over all
other serial ports available in system, implement override for
default_serial_console call returning this JTAG serial console.
This brings in a bit of a growth of size, but eventually will allow
us to unconditionally enable CONFIG_SERIAL_MULTI throughout the whole
U-Boot and maintain only one serial subsystem.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Marek Vasut <marek.va...@gmail.com>
Cc: Tom Rini <tr...@ti.com>
Cc: Mike Frysinger <vap...@gentoo.org>
---
arch/blackfin/cpu/jtag-console.c | 37 ++++++++++++++++++++++++++++++-------
common/serial.c | 2 ++
include/configs/bfin_adi_common.h | 2 +-
3 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/arch/blackfin/cpu/jtag-console.c b/arch/blackfin/cpu/jtag-console.c
index a77358a..7cddb85 100644
--- a/arch/blackfin/cpu/jtag-console.c
+++ b/arch/blackfin/cpu/jtag-console.c
@@ -194,12 +194,35 @@ int drv_jtag_console_init(void)
}
#ifdef CONFIG_UART_CONSOLE_IS_JTAG
+#include <serial.h>
/* Since the JTAG is always available (at power on), allow it to fake a UART */
-void serial_set_baud(uint32_t baud) {}
-void serial_setbrg(void) {}
-int serial_init(void) { return 0; }
-void serial_putc(const char c) __attribute__((alias("jtag_putc")));
-void serial_puts(const char *s) __attribute__((alias("jtag_puts")));
-int serial_tstc(void) __attribute__((alias("jtag_tstc")));
-int serial_getc(void) __attribute__((alias("jtag_getc")));
+void jtag_serial_setbrg(void)
+{
+}
+
+int jtag_serial_init(void)
+{
+ return 0;
+}
+
+static struct serial_device serial_jtag_drv = {
+ .name = "jtag",
+ .start = jtag_serial_init,
+ .stop = NULL,
+ .setbrg = jtag_serial_setbrg,
+ .putc = jtag_putc,
+ .puts = jtag_puts,
+ .tstc = jtag_tstc,
+ .getc = jtag_getc,
+};
+
+void bfin_jtag_initialize(void)
+{
+ serial_register(&serial_jtag_drv);
+}
+
+struct serial_device *default_serial_console(void)
+{
+ return &serial_jtag_drv;
+}
#endif
diff --git a/common/serial.c b/common/serial.c
index 0a43c1b..25aeea0 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -46,6 +46,7 @@ serial_initfunc(pxa_serial_initialize);
serial_initfunc(s3c24xx_serial_initialize);
serial_initfunc(s5p_serial_initialize);
serial_initfunc(bfin_serial_initialize);
+serial_initfunc(bfin_jtag_initialize);
serial_initfunc(mpc512x_serial_initialize);
serial_initfunc(uartlite_serial_initialize);
@@ -73,6 +74,7 @@ void serial_initialize(void)
s5p_serial_initialize();
mpc512x_serial_initialize();
bfin_serial_initialize();
+ bfin_jtag_initialize();
uartlite_serial_initialize();
serial_assign(default_serial_console()->name);
}
diff --git a/include/configs/bfin_adi_common.h
b/include/configs/bfin_adi_common.h
index 3fbf5c6..7132f8f 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -108,11 +108,11 @@
#define CONFIG_LOADS_ECHO 1
#define CONFIG_JTAG_CONSOLE
#define CONFIG_SILENT_CONSOLE
+#define CONFIG_SERIAL_MULTI
#ifndef CONFIG_BAUDRATE
# define CONFIG_BAUDRATE 57600
#endif
#ifndef CONFIG_DEBUG_EARLY_SERIAL
-# define CONFIG_SERIAL_MULTI
# define CONFIG_SYS_BFIN_UART
#endif
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
