Hi Josh, On 09.10.12 12:11, Josh Wu wrote: > Hi, Andreas > > Any feedback of these patches?
short answer: no ;) I think they could go into next (no obvious objections), but I would like to do some runtime tests on avr32 before. Beside that, if you do not insist on applying them ASAP to next I would like to wait until the release next Monday and apply the patches to u-boot-atmel/master then. Is that OK for you? Best regards Andreas Bießmann > > Best Regards, > Josh Wu > > On 9/14/2012 4:22 PM, Josh Wu wrote: >> This patch series enable MCI0 solt in at91sam9x5ek board. >> >> Josh Wu (3): >> mmc: at91: add multi block read/write support. >> ARM: at91sam9x5: enable MCI0 support for 9x5ek board. >> mmc: at91: use max timeout value. It will avoid some situation that >> timeout happened. >> >> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++ >> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++ >> drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++-- >> include/atmel_mci.h | 7 ++++++- >> include/configs/at91sam9x5ek.h | 10 ++++++++++ >> 5 files changed, 54 insertions(+), 3 deletions(-) >> > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot