From: Gabe Black <gabebl...@chromium.org>
U-boot needs a host controller or "hose" to interact with the PCI busses
behind them. This change installs a host controller during initialization of
the coreboot "board" which implements some of X86's basic PCI semantics. This
relies on some existing generic code, but also duplicates a little bit of code
from the sc520 implementation. Ideally we'd eliminate that duplication at some
point.
It looks like in order to scan buses beyond bus 0, we'll need to tell u-boot's
generic PCI configuration code what to do if it encounters a bridge,
specifically to scan the bus on the other side of it.
Signed-off-by: Gabe Black <gabebl...@chromium.org>
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/x86/cpu/coreboot/pci.c | 15 +++++++++++++++
arch/x86/include/asm/pci.h | 2 +-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c
index 732ca3c..0ddc975 100644
--- a/arch/x86/cpu/coreboot/pci.c
+++ b/arch/x86/cpu/coreboot/pci.c
@@ -25,6 +25,21 @@
* MA 02111-1307 USA
*/
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static struct pci_controller coreboot_hose;
+
void pci_init_board(void)
{
+ coreboot_hose.first_busno = 0;
+ coreboot_hose.last_busno = 0xff;
+ coreboot_hose.region_count = 0;
+
+ pci_setup_type1(&coreboot_hose);
+
+ pci_register_hose(&coreboot_hose);
+
+ coreboot_hose.last_busno = pci_hose_scan(&coreboot_hose);
}
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 37cc7e3..6d68ab6 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -24,7 +24,7 @@
*/
#ifndef _PCI_I386_H_
-#define _PCI_I386_H_ 1
+#define _PCI_I386_H_
#define DEFINE_PCI_DEVICE_TABLE(_table) \
const struct pci_device_id _table[]
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
