From: Rajeshwari Shinde <rajeshwar...@samsung.com>
This patch adds pinmux support for SPI channels
Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
Signed-off-by: Hatim Ali <hatim...@samsung.com>
---
Changes since v4:
Fixed minor nits suggested by Simon Glass
Changes since v5:
No change
Changes since v6:
Incorporated review comments by Simon Glass & Minkyu Kang
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c
b/arch/arm/cpu/armv7/exynos/pinmux.c
index 5796d56..3ecbf7d 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -112,6 +112,7 @@ static int exynos5_mmc_config(int peripheral, int flags)
s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
}
+
return 0;
}
@@ -230,6 +231,49 @@ static void exynos5_i2c_config(int peripheral, int flags)
}
}
+void exynos5_spi_config(int peripheral)
+{
+ int cfg = 0, pin = 0, i;
+ struct s5p_gpio_bank *bank = NULL;
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ struct exynos5_gpio_part2 *gpio2 =
+ (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2();
+
+ switch (peripheral) {
+ case PERIPH_ID_SPI0:
+ bank = &gpio1->a2;
+ cfg = GPIO_FUNC(0x2);
+ pin = 0;
+ break;
+ case PERIPH_ID_SPI1:
+ bank = &gpio1->a2;
+ cfg = GPIO_FUNC(0x2);
+ pin = 4;
+ break;
+ case PERIPH_ID_SPI2:
+ bank = &gpio1->b1;
+ cfg = GPIO_FUNC(0x5);
+ pin = 1;
+ break;
+ case PERIPH_ID_SPI3:
+ bank = &gpio2->f1;
+ cfg = GPIO_FUNC(0x2);
+ pin = 0;
+ break;
+ case PERIPH_ID_SPI4:
+ for (i = 0; i < 2; i++) {
+ s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4));
+ s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4));
+ }
+ break;
+ }
+ if (peripheral != PERIPH_ID_SPI4) {
+ for (i = pin; i < pin + 4; i++)
+ s5p_gpio_cfg_pin(bank, i, cfg);
+ }
+}
+
static int exynos5_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
@@ -257,6 +301,13 @@ static int exynos5_pinmux_config(int peripheral, int flags)
case PERIPH_ID_I2C7:
exynos5_i2c_config(peripheral, flags);
break;
+ case PERIPH_ID_SPI0:
+ case PERIPH_ID_SPI1:
+ case PERIPH_ID_SPI2:
+ case PERIPH_ID_SPI3:
+ case PERIPH_ID_SPI4:
+ exynos5_spi_config(peripheral);
+ break;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return -1;
diff --git a/arch/arm/include/asm/arch-exynos/periph.h
b/arch/arm/include/asm/arch-exynos/periph.h
index 082611c..4054fb6 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -44,6 +44,11 @@ enum periph_id {
PERIPH_ID_SDMMC3,
PERIPH_ID_SDMMC4,
PERIPH_ID_SROMC,
+ PERIPH_ID_SPI0,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SPI3,
+ PERIPH_ID_SPI4,
PERIPH_ID_UART0,
PERIPH_ID_UART1,
PERIPH_ID_UART2,
--
1.7.2.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
