nand_ecc.c:82:5: warning: symbol 'nand_calculate_ecc' was not declared. Should 
it be static?
nand_ecc.c:155:5: warning: symbol 'nand_correct_data' was not declared. Should 
it be static?
nand_base.c:2854:1: error: directive in argument list
nand_base.c:2856:1: error: directive in argument list

Signed-off-by: Kim Phillips <kim.phill...@freescale.com>
---
v2: re-worked based upon input from Scott, checkpatch fixes.

 drivers/mtd/nand/nand_base.c | 13 +++++++------
 drivers/mtd/nand/nand_ecc.c  |  1 +
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 71f5027..d3b71a5 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2601,6 +2601,7 @@ static const struct nand_flash_dev 
*nand_get_flash_type(struct mtd_info *mtd,
                                                  int *maf_id, int *dev_id,
                                                  const struct nand_flash_dev 
*type)
 {
+       const char *name;
        int i, maf_idx;
        u8 id_data[8];
        int ret;
@@ -2848,14 +2849,14 @@ ident_done:
                chip->cmdfunc = nand_command_lp;
 
        /* TODO onfi flash name */
-       MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
-               " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
-               nand_manuf_ids[maf_idx].name,
+       name = type->name;
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
-               chip->onfi_version ? chip->onfi_params.model : type->name);
-#else
-               type->name);
+       if (chip->onfi_version)
+               name = chip->onfi_params.model;
 #endif
+       MTDDEBUG(MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
+                " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+                nand_manuf_ids[maf_idx].name, name);
 
        return type;
 }
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 81f0e08..097cf62 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -39,6 +39,7 @@
 
 #include <asm/errno.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand_ecc.h>
 
 /* The PPC4xx NDFC uses Smart Media (SMC) bytes order */
 #ifdef CONFIG_NAND_NDFC
-- 
1.8.0


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to