Add static struct eth_ops and set ops function pointers statically.
Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek <tmshl...@gmail.com>
---
drivers/net/e1000.c | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index c9f9fb3..82e89d8 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -5118,6 +5118,13 @@ void e1000_get_bus_type(struct e1000_hw *hw)
/* A list of all registered e1000 devices */
static LIST_HEAD(e1000_hw_list);
+static struct eth_ops e1000_ops = {
+ .init = e1000_init,
+ .recv = e1000_poll,
+ .send = e1000_transmit,
+ .halt = e1000_disable
+};
+
/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
You should omit the last argument struct pci_device * for a non-PCI NIC
@@ -5218,10 +5225,7 @@ e1000_initialize(bd_t * bis)
nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]);
/* Set up the function pointers and register the device */
- nic->eo->init = e1000_init;
- nic->eo->recv = e1000_poll;
- nic->eo->send = e1000_transmit;
- nic->eo->halt = e1000_disable;
+ nic->eo = &e1000_ops;
eth_register(nic);
}
--
1.7.2.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
