Add static struct eth_ops and set ops function pointers statically.
Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek <tmshl...@gmail.com>
---
drivers/net/uli526x.c | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index 33d8b49..65670db 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -198,6 +198,13 @@ static struct pci_device_id uli526x_pci_tbl[] = {
{}
};
+static struct eth_ops uli526x_ops = {
+ .init = uli526x_init_one,
+ .halt = uli526x_disable,
+ .send = uli526x_start_xmit,
+ .recv = uli526x_rx_packet
+};
+
/* ULI526X network board routine */
/*
@@ -237,10 +244,7 @@ int uli526x_initialize(bd_t *bis)
db->pdev = devno;
dev->iobase = iobase;
- dev->eo->init = uli526x_init_one;
- dev->eo->halt = uli526x_disable;
- dev->eo->send = uli526x_start_xmit;
- dev->eo->recv = uli526x_rx_packet;
+ dev->eo = &uli526x_ops;
/* init db */
db->ioaddr = dev->iobase;
--
1.7.2.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
