do they support PJC, or it's own form. I know for instance, our Canon Imagerunner uses the Comment command in HP PJC to allow use of it's own PJC commands (which will be ignored by non canons).
They work well for page setup, and best of all they are in ENGLISH, not escape codes. George >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of HENDERSON MIKE, >MR >Sent: Wednesday, March 30, 2005 4:57 PM >To: u2-users@listserver.u2ug.org >Subject: [U2] [UV] Win 2K3 Printer setup (Unclassified) > > >> ______________________________________________ >> From: MACK ANDREW, F/S >> Sent: Thursday, 31 March 2005 09:52 >> To: HENDERSON MIKE, MR >> Subject: [UV] Win 2K3 Printer setup {unclassified} >> >> Mike please post the following onto the U2 user group. Cheers, >> >> Hi everyone, >> >> We are running UV 10.0.15 on Windows 2003. We maintain a >hundred or so >> printers spread throughout New Zealand. Most printers are Xerox >> Docucentre multi functional devices (MFD's) with a few HP's thrown in >> for luck. Many printers run off a HP JetDirect print server, >but these >> are being phased out as more and more printers have their own inbuilt >> print server. >> >> Until now, we have setup the printers on the server with the >Generic / >> Text print driver and controlled orientation etc with a >separator page >> (see below for PCL commands). This removed the requirement >to maintain >> individual printer drivers on the server. However the new Xerox MFD's >> (Docucentre 186) are not playing the game at all. The Portrait >> orientation works fine, but the Landscape orientation has a left >> margin set halfway across the page. We also get the last line of each >> page printed on a separate page. >> >> I am in the middle of trying a large number of different >configuration >> settings, both in UniVerse and Windows, including trying to get the >> Windows printer properties to control orientation and page size. >> However, that doesn't seem to work. >> >> I would appreciate any advice the list can give. >> >> Universe SETPTR settings: >> >SETPTR >> Unit Number : 0 >> Page Width : 132 >> Page Depth : 66 >> Top Margin : 3 >> Bottom Margin : 3 >> Print mode : 1 - Spooled Output >> >> Default job name : "uniVerse" >> Destination printer : xxxxxxx-L >> >> The separator page used by the above printer: >> \ >> \H1B\L&l1O >> \H1B\L&l8D >> \H1B\L&k4S >> \H1B\L&l1E >> \H1B\L&l0L >> \H1B\L&l66P >> >> Thanks. >> >> F/S Andrew Mack >> Deputy Systems Administrator >> Atlas Systems >> New Zealand Defence Force >> >> DDI (04) 237 1914 >> Dtln 342 5914 >> >> > >The information contained in this Internet Email message is intended >for the addressee only and may contain privileged information, but not >necessarily the official views or opinions of the New Zealand >Defence Force. >If you are not the intended recipient you must not use, >disclose, copy or >distribute this message or the information in it. > >If you have received this message in error, please Email or telephone >the sender immediately. >------- >u2-users mailing list >u2-users@listserver.u2ug.org >To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
