Thanks John.
>-----Original Message----- >From: [EMAIL PROTECTED] [mailto:owner-u2- >[EMAIL PROTECTED] On Behalf Of John Jenkins >Sent: Wednesday, July 16, 2008 3:17 PM >To: u2-users@listserver.u2ug.org >Subject: RE: [U2] UD - Telnet Event Logs > >Bill > >"no defined services" you can ignore. >_____ > >"the handle is invalid" means that the process concerned tried to use a TCP >data stream after it had been destroyed (typically using "x" to terminate a >TELNET client). >_____ > >"xon/xoff failed" looks like it is probably the same as above. >_____ > >"ntdll.dll failure" - pass - a number of things can cause this- permissions, >interfering software ....... It's worth checking WHO got this, what LOGIN >credentials they used, WHAT they were doing and what was happening on the >SERVER at the time. Lastly - is it repeatable? >_____ >"Telnet/Site licensing enquiry failed" means that a process tried to use a >Device License and was unsuccessful (a number of possible reasons): > >1) you don't have an Enterprise or Workgroup license > >2) the client software you were using does not support Device Licensing >(refer to the client software provider or use one of the IBM clients - >wIntegrate, Dynamic Connect or SBClient) > >3) Happenstance - a Device Licensing connection exchanges data on the telnet >data stream at start-up - some client side LOGON scripts or >over-enthusiastic keying after running udtts (Unix) (or opening a connection >to the UniData TELNET server on Windows) but before LOGIN is complete can >interfere sometimes. > >4) Old copy of the client-side DLL - the U2 device-licensing DLL changed a >little over time - if you have an old version or a mismatch against the >database version you can get a failure every so often (roll of the dice) - >try again. Resolution - upgrade the client software - if not an IBM client >then speak to the software provider. > >5) Incompatible "stty" settings (Unix only). > >6) Timing - if the server or a client PC is grinding VERY slowly the data >exchange can timeout - typically you see a string of (apparently) random >characters on the TELNET client screen when this happens and a 30 second >pause. Pressing <CR> will hurry past the pause, but you will not get a >Device License for this session. > >As a check use Dynamic Connect (it's on the client CD image shipped with >your database) - hopefully not a *very* old version (upgrade). There are >notes about Device Licensing fixes in the database release notes (worth >review). > > >Regards > >JayJay > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Bill Haskett >Sent: 16 July 2008 22:10 >To: u2-users@listserver.u2ug.org >Subject: [U2] UD - Telnet Event Logs > >I've been looking at our production event logs and notice numerous (not a >whole lot) >event logs like: > > > >1) Wait for server threads failed.. Win32 error: 6. The handle is invalid.. > >2) Wait for server threads failed.. Win32 error: 6. The handle is invalid.. > >3) Faulting application udt.exe, version 7.1.9.3260, faulting module >ntdll.dll, >version 5.2.3790.3959, fault address 0x0002caa2. > >4) Telnet set xon/xoff information failed.. > >5) Telnet set my option binary mode failed.. > >6) Telnet Client/Site licensing inquiry failed.. > >For more information, see Help and Support Center at >http://go.microsoft.com/fwlink/events.asp. > > > >We also get an occasional ObjectCall (which I don't think we use) error >like: > > > >1) There are no defined services.. > > > >This system is straight telnet via AccuTerm (or AccuTerm IE) with no serial >devices >or attached printers. There are plenty of licenses. This is a separate UD >server on >Win 2K3 with all patches. > > > >Does anyone know what these log entries are about and why they'd be >occurring? > > > >Thanks, > >Bill Haskett >Advantos Systems, Inc. >4370 La Jolla Village Drive, Suite 400 >San Diego, CA 92122 >( 760-944-5570 x3000 (CA) >------- >u2-users mailing list >u2-users@listserver.u2ug.org >To unsubscribe please visit http://listserver.u2ug.org/ >------- >u2-users mailing list >u2-users@listserver.u2ug.org >To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
