I did try and print another type of report, and it does look like it is stair-stepping. So I checked the printer here and the append CR to LF was set to a no. Changed that to a "YES" and the report printed fine.
Thanks!! Marc Caminiti IS Manager Nashbar Direct, Inc 6103 State Route 446 Canfield, OH 44406 330.533.1989, ext 336 330.702.9733, fax No trees were killed in the creation of this message. However, many electrons were terribly inconvenienced -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Rasmussen Sent: Friday, November 28, 2008 12:55 PM To: u2-users@listserver.u2ug.org Subject: Re: [U2] PCL Help What are the end-of-line characters? If you are outputting only linefeeds, and nothing in the OS expands them to return-linefeeds, and the printer is not configured to read linefeeds as return-linefeeds, then you could get this behavior. Try a report with very short lines - does it stair-step? Quickest test/fix is to use the printer's front panel to configure end-of-line, to something like: LF => CR/LF (There is a whole host of problems similar to this that pop up when one thing changes, such as moving to a different physical printer or a different OS. The best solution is to include codes at the beginning of your PCL output to initialize everything conceivable. This isolates you from printer configuration variations, especially. Some other examples are symbol set, lines per page/vertical spacing, pitch, orientation, and paper size.) On Fri, 28 Nov 2008, Caminiti, Marc wrote: > I was wondering if anyone could help .... > > We recently upgraded to Universe 10.2.7 on Red Hat Enterprise Linux > 5.2 and are now having problems printing out compressed reports on a > HP LaserJet 4050 > > For the compressed reports, I send the PCL codes to switch the printer > to landscape and to compress to 17cpi. When the report prints, it is > only printing the first line of data and nothing else. It is > compressing and in landscape. If I send it to a file, all of the data > is there. Below is what is being sent. The only thing that is > printing is the "MC 10:41:09am 28 Nov 2008 BIKE NASHBAR PAGE 1" > > Within RedHat (CUPS) the make & Model is "Local Raw Printer". Even > when I try without any compression codes, it only prints the first > line of data. When I have the RedHat (CUPS) make & model to HP > LaserJet 4050, the non-compressed/non-landscaped print, prints fine. > But when I try and send the PCL codes, it just spits out plan sheets of paper. > > Any suggestions will be greatly appreciated. Already spend 3 1/2 > hours of different combinations and cannot come up with anything that works. > > Thanks in advance > Marc > > > > &l1O(s22H > > > > > > MC 10:41:09am 28 Nov 2008 BIKE NASHBAR PAGE 1 > > DAILY PURCHASING REPORT AS OF 28 Nov 2008 > > BYR PGC ITEM NUMBER......... DESCRIPTION........................ QAV.. > QOR. QOH.. ONORD DLD.. WK1.. WK2.. WK3.. WK4.. YACT YTD LY DMD.. MSRP > $ CAT $. WEB $. LAST..... EXT'D COST MARGIN PO #'S. VEND# ST INV > > PIC. LS. COST..... LIFE > > TKV N IS-TEST2-A BLAH 0 0 0 0 0 0 0 0 0 0 2.50 2.500 *** 0.500 0.000 > 80.00% 9999 A 8888 > > JB N IS-TEST-DEVON IS TEST SKU 0 0 0 0 0 0 0 0 0 0 2.00 2.000 2.00 > 0.001 0.000 99.95% 6103 A 8888 > > TKV N IS-TEST-JIM IS TEST SKU 0 0 0 0 0 0 0 0 0 0 2.00 2.000 2.00 > 0.001 0.000 99.95% 6103 A 8888 > > JB N IS-TEST-MARC IS TEST SKU 0 0 0 1 05/15 0 0 0 0 0 0 0 2.00 2.000 > 2.00 0.001 0.000 99.95% 20325 99999 A 8888 > > 1 03/31 20390 6103 > > 1 10/21 21120 6103 > > 1 07/09 6103-12 6103 > > 3 > > 1 11/03 6103-MC 6103 > > 1 11/19 6103MAR 6103 > > C > > TKV N IS-TEST-TAMMY IS TEST SKU 0 0 0 0 0 0 0 0 0 0 2.00 2.000 2.00 > 0.001 0.000 99.95% 6103 A 8888 > > *** 0 0 0 6 0 0 0 0 0.000 > > > > > > > > Marc Caminiti > IS Manager > Nashbar Direct, Inc > 6103 State Route 446 > Canfield, OH 44406 > 330.533.1989, ext 336 > 330.702.9733, fax > > Reality is merely an illusion, albeit a very persistent one > > > > > CONFIDENTIALITY NOTICE: This e-mail and any attachments may contain > confidential information that is legally privileged. The information > is solely for the use of the intended recipient(s). Any disclosure, > copying, distribution, or other use of this information is strictly > prohibited. If you have received this e-mail in error, please notify > the sender by return e-mail and delete this message. > ------- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ > > > Regards, ....Bob Rasmussen, President, Rasmussen Software, Inc. personal e-mail: [EMAIL PROTECTED] company e-mail: [EMAIL PROTECTED] voice: (US) 503-624-0360 (9:00-6:00 Pacific Time) fax: (US) 503-624-0760 web: http://www.anzio.com street address: Rasmussen Software, Inc. 10240 SW Nimbus, Suite L9 Portland, OR 97223 USA ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ CONFIDENTIALITY NOTICE: This e-mail and any attachments may contain confidential information that is legally privileged. The information is solely for the use of the intended recipient(s). Any disclosure, copying, distribution, or other use of this information is strictly prohibited. If you have received this e-mail in error, please notify the sender by return e-mail and delete this message. ------- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/