Thanks... I tried all the variations of sec - most mounted - some failed - but none allowed UV to LIST the directory I also added ver=1.0
I may need to setup a ftp server on the printwizard machine, and work around that way until I figure it out. We will be upgrading the RHEL5 to RHEL6 once our server issues are fixed - so maybe RHEL6 will be ok (or not) Found a bunch of things different from RHEL5 to Fedora19 (switches in ftp, mailx and attachments and Few others I forget at the moment). George -----Original Message----- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bob Little Sent: Wednesday, October 09, 2013 10:31 AM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS I had to add the sec=ntlm to the line in my /etc/fstab since about FC18 or so: //shareName mountPoint cifs rw,credentials=.myCredentials,_netdev,sec=ntlm,users,nounix,nosetuids,file_mode=0644,dir_mode=0775 0 0 bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 ________________________________________ From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 10:16 AM To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was <1>F , <2>/mnt/mountname, <3>D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me "Unable to open -filename-" I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname "//Sharename",file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). _______________________________________________ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users _______________________________________________ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users _______________________________________________ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
