I agree Mike, however my question is more basic than that. I realize that a
UBNT radio comes with the firewall turned off and in fact I've never turned
it on. So, my question is: Default from the factory, which ports are open
and/or closed? Obviously most common ports are open. Do I need to open any
to prevent any issues?

On Tue, Nov 25, 2014 at 10:02 AM, Mike Hammett <wispaubntus...@ics-il.net>
wrote:

> I think people go a bit excessive with firewalling. If there's no service
> there to answer, there's no need to firewall it.
>
>
>
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> <https://www.facebook.com/ICSIL>
> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
> <https://www.linkedin.com/company/intelligent-computing-solutions>
> <https://twitter.com/ICSIL>
>
> ------------------------------
> *From: *"RickG" <rgunder...@gmail.com>
> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org>
> *Sent: *Tuesday, November 25, 2014 9:00:45 AM
> *Subject: *Re: [Ubnt_users] Default open/closed ports - [WAS] DMZ
> Management Ports, what are they?
>
> Ya, thank goodness for upnp. I'm just trying to understand and be sure I'm
> not causing any issues for my customers as far as open & closed ports.
> Obviously certain ports are open but are they all?
>
> On Tue, Nov 25, 2014 at 7:32 AM, Josh Luthman <j...@imaginenetworksllc.com
> > wrote:
>
>> If you're behind Nat your Xbox will say closed because they need to be
>> dstnated.  There's upnp on the later versions.
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>> On Nov 25, 2014 12:28 AM, "RickG" <rgunder...@gmail.com> wrote:
>>
>>> So I should expect all ports to be open?
>>>
>>> On Mon, Nov 24, 2014 at 5:55 PM, Josh Luthman <
>>> j...@imaginenetworksllc.com> wrote:
>>>
>>>> There are no firewall rules by default.  Nothing is DMZ'ed nor PAT'ed.
>>>>
>>>>
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>>
>>>> On Mon, Nov 24, 2014 at 5:25 PM, RickG <rgunder...@gmail.com> wrote:
>>>>
>>>>> This reminded me of a question: What ports are open or closed by
>>>>> default of a UBNT radio in router mode?
>>>>>
>>>>> On Wed, Nov 19, 2014 at 5:56 PM, Sam Tetherow <tethe...@shwisp.net>
>>>>> wrote:
>>>>>
>>>>>> Definitively list:
>>>>>> TCP telnet (23)
>>>>>> TCP http (80)
>>>>>> TCP https (443)
>>>>>> ICMP Echo-Request
>>>>>> TCP ssh (22)
>>>>>> TCP snmp (161)
>>>>>> TCP 18888
>>>>>> UDP discard (9)
>>>>>> UDP 10001 - ubiquiti discovery protocol although it never seems to
>>>>>> reply
>>>>>> when in DMZ mode
>>>>>>
>>>>>> If any of the services are disabled on the radio then the ports are
>>>>>> forwarded on to the DMZ radio, if the ports are changed on the
>>>>>> services
>>>>>> tab then they will be changed in the DMZ section.
>>>>>>
>>>>>> If in doubt, ssh into the radio and run iptables -t nat -L
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 11/14/2014 06:36 PM, Matt Jenkins wrote:
>>>>>> > I assume 80, 22, 443. What others are there? I can't find it in any
>>>>>> of
>>>>>> > the manuals.
>>>>>> > _______________________________________________
>>>>>> > Ubnt_users mailing list
>>>>>> > Ubnt_users@wispa.org
>>>>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>>
>>>>>> _______________________________________________
>>>>>> Ubnt_users mailing list
>>>>>> Ubnt_users@wispa.org
>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> -RickG KyWiFi
>>>>>
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Ubnt_users mailing list
>>>> Ubnt_users@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>
>>>>
>>>
>>>
>>> --
>>> -RickG KyWiFi
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>> _______________________________________________
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> --
> -RickG KyWiFi
>
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
-RickG KyWiFi
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to