So, running IPerf on the switches at each end of the AirFiber is a bad idea? I figured its the closed devices to the AF.
On Mon, Dec 1, 2014 at 4:47 PM, Josh Reynolds <j...@spitwspots.com> wrote: > I think you're misunderstanding a bit, you don't want the switch to > generate traffic, that's not the problem. You want to test on devices on > the other ends (connected to) the switch that pass through the link, > something like an x86 pc or ccr or even edgerouter/pro that can generate > lots of traffic. > > The TS's though, you will see weird throughput issues with them, and you > will have around .2-.5% packet loss. > > josh reynolds :: chief information officer > spitwspots :: www.spitwspots.com > > On 12/01/2014 12:40 PM, RickG wrote: > > Confirmed. I just ran IPerf from one TS8 to another TS8 and just get > around 100MBps! I'm going to move them to a tower with less traffic then. > Now what do I use for a higher capacity switch? I hate to put a high dollar > switch in a rough environment. > > On Mon, Dec 1, 2014 at 4:29 PM, Josh Reynolds <j...@spitwspots.com> wrote: > >> Toughswitches are fundamentally broken and we have been pulling them >> off our network. If you need more info, there's like a 25 page thread on >> the Ubiquiti forum. >> >> Also, you can't use them to generate much traffic as everything will be >> done by the management cpu/interface, which is 100Mb. >> >> josh reynolds :: chief information officer >> spitwspots :: www.spitwspots.com >> >> On 12/01/2014 12:11 PM, RickG wrote: >> >> Agreed. Just wanted to confirm. Will have to chase the problem down! >> >> On Mon, Dec 1, 2014 at 4:07 PM, Josh Luthman <j...@imaginenetworksllc.com >> > wrote: >> >>> You should be getting 770 megs on a test in either direction (even at >>> the same time!) >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Mon, Dec 1, 2014 at 4:06 PM, RickG <rgunder...@gmail.com> wrote: >>> >>>> ToughSwitches on both ends on gigabit ports. I thought maybe laptop was >>>> maxed out until I ran IPerf from TS8 to TS8. >>>> >>>> On Mon, Dec 1, 2014 at 4:02 PM, Josh Luthman < >>>> j...@imaginenetworksllc.com> wrote: >>>> >>>>> 100 megabit switch between laptop and Airfiber? Is it linked at gig? >>>>> Is your laptop's CPU maxed out? >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Mon, Dec 1, 2014 at 4:00 PM, RickG <rgunder...@gmail.com> wrote: >>>>> >>>>>> It might be the capacity but when I test I only get around 100Mbps. >>>>>> >>>>>> On Mon, Dec 1, 2014 at 3:50 PM, Mike Hammett < >>>>>> wispaubntus...@ics-il.net> wrote: >>>>>> >>>>>>> iPerf is not included with airFiber as it isn't needed. What it >>>>>>> tells you the channel capacity is is what the channel capacity is. >>>>>>> >>>>>>> >>>>>>> >>>>>>> ----- >>>>>>> Mike Hammett >>>>>>> Intelligent Computing Solutions >>>>>>> http://www.ics-il.com >>>>>>> >>>>>>> ------------------------------ >>>>>>> *From: *"RickG" <rgunder...@gmail.com> >>>>>>> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> >>>>>>> *Sent: *Monday, December 1, 2014 2:48:52 PM >>>>>>> >>>>>>> *Subject: *Re: [Ubnt_users] Speed test no working >>>>>>> >>>>>>> Is there a trick to getting iperf to work on AirFiber? >>>>>>> >>>>>>> On Sun, Nov 16, 2014 at 4:01 PM, Adair Winter < >>>>>>> ada...@amarillowireless.net> wrote: >>>>>>> >>>>>>>> I usually just SSH to the client radio/far side, run iperf -s then >>>>>>>> go to one of my servers in the data center and run iperf -c (client >>>>>>>> IP) -P5 >>>>>>>> works better than the web interface anyway >>>>>>>> >>>>>>>> >>>>>>>> On Sun, Nov 16, 2014 at 2:33 PM, Daniel Peoples <dpe...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> For speedtests I actually have a 5 year old bullet m5 in my NOC >>>>>>>>> with the wlan disabled on the latest firmware, it has to be rebooted >>>>>>>>> about >>>>>>>>> once a month for it to work. >>>>>>>>> >>>>>>>>> Also, I don't know when they changed it, but for some reason the >>>>>>>>> results of the speedtests(which I thought were UDP) are actually what >>>>>>>>> I can >>>>>>>>> real world get with TCP on that same circuit. Anyone know whats up >>>>>>>>> with >>>>>>>>> this? I have tested from several different points in our network with >>>>>>>>> a >>>>>>>>> variety of backhauls to that bulletm5 and get real world TCP speeds >>>>>>>>> now a >>>>>>>>> days. >>>>>>>>> >>>>>>>>> *Daniel Peoples* >>>>>>>>> Resonance Broadband >>>>>>>>> *Resonancebroadband.com* <http://Resonancebroadband.com> >>>>>>>>> 918-429-3620 >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sun, Nov 16, 2014 at 2:25 PM, Tim Kerns <t...@cv-access.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Not so easy to do....if you have, like me,some bullets or air >>>>>>>>>> grids.... then they can not have anything above 5.3 because you >>>>>>>>>> lose DFS. >>>>>>>>>> >>>>>>>>>> These were not re-certified by UBNT. >>>>>>>>>> >>>>>>>>>> :0 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *From:* Rory Conaway <r...@triadwireless.net> >>>>>>>>>> *Sent:* Sunday, November 16, 2014 12:02 PM >>>>>>>>>> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >>>>>>>>>> *Subject:* Re: [Ubnt_users] Speed test no working >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Just get everything on 5.5.10. No reason not to. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Rory >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *From:* ubnt_users-boun...@wispa.org [mailto: >>>>>>>>>> ubnt_users-boun...@wispa.org] *On Behalf Of *Jerry Richardson >>>>>>>>>> (airCloud) >>>>>>>>>> *Sent:* Sunday, November 16, 2014 12:01 PM >>>>>>>>>> *To:* Ubiquiti Users Group >>>>>>>>>> *Subject:* Re: [Ubnt_users] Speed test no working >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> We have noticed that if the SW versions don't match it will not >>>>>>>>>> work. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sun, Nov 16, 2014 at 10:49 AM, Daniel Peoples < >>>>>>>>>> dpe...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>> This is something that has been an issue since 5.5 as far as I >>>>>>>>>> know. >>>>>>>>>> >>>>>>>>>> On Nov 16, 2014 11:18 AM, "Paul Conlin" < >>>>>>>>>> pcon...@blazebroadband.com> wrote: >>>>>>>>>> >>>>>>>>>> Is there a fix for this? A workaround besides rebooting? We are >>>>>>>>>> on 5.5.8. Should we move up to 5.5.10? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> PC >>>>>>>>>> >>>>>>>>>> Blaze Broadband >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *From:* ubnt_users-boun...@wispa.org [mailto: >>>>>>>>>> ubnt_users-boun...@wispa.org] *On Behalf Of *Daniel and Regina >>>>>>>>>> Peoples >>>>>>>>>> *Sent:* Tuesday, March 4, 2014 8:57 PM >>>>>>>>>> *To:* Ubiquiti Users Group >>>>>>>>>> *Subject:* Re: [Ubnt_users] Speed test no working >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> This is a "Feature" of 5.5+ IIRC 5.3.5 didn't have this issue. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *Daniel Peoples* >>>>>>>>>> Resonance Broadband >>>>>>>>>> >>>>>>>>>> *Resonancebroadband.com* <http://Resonancebroadband.com> >>>>>>>>>> 918-429-3620 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tue, Mar 4, 2014 at 7:53 PM, RickG <rgunder...@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Well, 5.5.4 sucks... >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tue, Mar 4, 2014 at 4:59 PM, Eduardo <edua...@webjogger.net> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Is this issue related to the firmware version? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Eduardo >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ----- Original Message ----- >>>>>>>>>> >>>>>>>>>> *From:* Matt Hoppes <mhop...@indigowireless.com> >>>>>>>>>> >>>>>>>>>> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >>>>>>>>>> >>>>>>>>>> *Sent:* Tuesday, March 04, 2014 4:49 PM >>>>>>>>>> >>>>>>>>>> *Subject:* Re: [Ubnt_users] Speed test no working >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Reboot both radios -- there's some kind of a memory leak/issue. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Matt Hoppes >>>>>>>>>> Director of Information Technology >>>>>>>>>> Indigo Wireless >>>>>>>>>> +1 (570) 723-7312 >>>>>>>>>> >>>>>>>>>> On 3/4/14, 4:48 PM, Eduardo wrote: >>>>>>>>>> > I'm trying to run a speed test from a station in a PtP link, >>>>>>>>>> and got >>>>>>>>>> > this message: >>>>>>>>>> > >>>>>>>>>> > Error: Specified device is not >>>>>>>>>> > compatible for speedtest. >>>>>>>>>> > >>>>>>>>>> > Both radios are BulletM5 with v5.5.4. I got the same error when >>>>>>>>>> tried in >>>>>>>>>> > a link with RocketM365 in both ends and v5.5.6. >>>>>>>>>> > >>>>>>>>>> > Also I've tried in a PtoP connection also with Bullets, but M2 >>>>>>>>>> and >>>>>>>>>> > v.5.5.6 with the same result. >>>>>>>>>> > >>>>>>>>>> > The issue is always running the speed test from the station to >>>>>>>>>> the AP. >>>>>>>>>> > >>>>>>>>>> > Have you guys seen this issue? >>>>>>>>>> > >>>>>>>>>> > Any suggestions on how I can fix it. >>>>>>>>>> > >>>>>>>>>> > Thanks, >>>>>>>>>> > Eduardo >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > _______________________________________________ >>>>>>>>>> > Ubnt_users mailing list >>>>>>>>>> > Ubnt_users@wispa.org >>>>>>>>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> > >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> -RickG KyWiFi >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------ >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Ubnt_users mailing list >>>>>>>>>> Ubnt_users@wispa.org >>>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Ubnt_users mailing list >>>>>>>>> Ubnt_users@wispa.org >>>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> Adair Winter >>>>>>>> VP, Network Operations / Owner >>>>>>>> Amarillo Wireless | 806.316.5071 >>>>>>>> C: 806.231.7180 >>>>>>>> http://www.amarillowireless.net >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Ubnt_users mailing list >>>>>>>> Ubnt_users@wispa.org >>>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> -RickG KyWiFi >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Ubnt_users mailing list >>>>>>> Ubnt_users@wispa.org >>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Ubnt_users mailing list >>>>>>> Ubnt_users@wispa.org >>>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> -RickG KyWiFi >>>>>> >>>>>> _______________________________________________ >>>>>> Ubnt_users mailing list >>>>>> Ubnt_users@wispa.org >>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Ubnt_users mailing list >>>>> Ubnt_users@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>> >>>>> >>>> >>>> >>>> -- >>>> -RickG KyWiFi >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> Ubnt_users@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> >> >> -- >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing >> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > > -- > -RickG KyWiFi > > > _______________________________________________ > Ubnt_users mailing > listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG KyWiFi
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users