I think a bubble level would solve this mystery.
Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: "Shawn C. Peppers" <videodirectwispal...@gmail.com> Date: 8/28/16 11:23 AM (GMT-07:00) To: Ubiquiti Users Group <ubnt_users@wispa.org> Subject: Re: [Ubnt_users] Tick marks on UBNT sectors Agreed with justin, you need to level the sector out and mark your reference point, then adjust per desired down-tilt calculating appropriately. I always wondered about this, i never have gotten a good answer. A lot of time my sectors look like they are pointing up more than down when i try to achieve a -1 down-tilt. Shawn C. PeppersVideo Direct Satellite & Entertainment866-680-8433 Toll Free480-287-9960 Faxhttp://www.video-direct.tv On Aug 28, 2016, at 12:11 PM, Justin Wilson <li...@mtin.net> wrote: It is a mechanical mark not taking into account electrical downtilt. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEOxISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/ChairmanInternet Exchange - Peering - Distributed Fabric On Aug 27, 2016, at 11:53 PM, Mike Lyon <mike.l...@gmail.com> wrote: On the UBNT sectors, do the tick marks take into consideration their built in electrical downtilt? For instance, if the sector is set to the zero tick mark, is that actually zero degrees or is that technically -2 degrees? Thanks, Mike -- Mike Lyon408-621-4826 mike.l...@gmail.com http://www.linkedin.com/in/mlyon _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users