I have a M5 rocket on a AMO-5G13 omni that was running XM 5.6.4 and was running great. It just started to disconnect randomly and need a hard reboot to reconnect the client radios (Powerbeam-M5-400). A simple power cycle was all that was needed to get fully operational again. Happened twice this month, so I thought it needed updated. Since it was an older M5 I replaced it this weekend with a new M5, XW version 5.6.4.
Also, I read on a UBNT forum about running the new XW CPE's on XW AP's as they worked better, but that is not what I am seeing. So now the AP and all the CPE's (Powerbeam-M5-400) are on the XW version 5.64 and I am seeing terrible signals only on my CPE's that are near the tower. The CPE's farther away are fine, but anything less than a mile is showing signals in the 80's and previously they were in the low 60's to 50's. Some CPE's have perfect line of sight too. Not sure what is causing it and hope somebody knows. At this point I'm ready to deal with the reboots and put the old XM radio back up! Hope somebody has a fix and I was thinking of firmware, but scared to change too much until I troubleshoot more as I read horror stories on all the firmware changes. Thanks, Troy _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users