We have now started to see M5 NanoStations having some issues as well. We have not rolled any of them back but have a truck roll to go fix one tomorrow. Some NanoBridges too. Funny part is our M2 tower we did is working fine.
Steve Barnes Wireless Operations Manager New Lisbon Broadband NLBC.COM PCSWIN.COM 765-584-2288 ext:1101 From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Mitch Sent: Thursday, January 05, 2017 2:13 PM To: Ubiquiti Users Group <ubnt_users@wispa.org>; James Craig <ja...@ubnt.com> Subject: Re: [Ubnt_users] FW 6.0 on LocoM900 We are seeing the same thing but includes 2.4 nano and some AG2's (not all and not xm or xw specific) also the 2.4 clients will work for awhile then stop passing traffic until truck roll reboot Also RM9 upgraded to 6.0 one client works fine second client will not pass traffic no matter the firmware. This did NOT change when RM9 down graded back to 5.5.10 not 5.6.9 Also use care in upgrading 5Ghz and AC see strange issues as well down grading everything back to 5.6.9 and some to 5.5.10 to get things working again 6.0 got bloody Wierd!!!!! Mitch On 01/05/2017 11:25 AM, David Kunat wrote: Very similar issue here. Just bricked two m900's On Jan 5, 2017, at 7:59 AM, James Craig via Ubnt_users <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>> wrote: Hey Steve, Thanks for the report. Sending you an message offline. On Thu, Jan 5, 2017 at 9:03 AM, Steve Barnes <st...@pcswin.com<mailto:st...@pcswin.com>> wrote: Yesterday we started doing more testing on 6.0. We decided to test a Loco M900 upgrade here in the office before rolling out to customers. Glad we did. Upgraded first radio from 5.6.9 to 6.0. upgraded directly plugged into radio not wirelessly. Upgrade applied and the radio Bricked. No matter what we would do could not get back into radio. Tried factory reset with button on radio, No luck. Gave up and tried 2nd radio. Same scenario, upgrade proceeded as before. Was able to get back into radio. Decided to factory reset from GUI to make sure no issues. Then this device Bricked. Tried more times to get back in and finally got a login. Interesting thing was LAN light on radio would not show connection. Only sporadic blinking. Flashed unit back to 5.6.9 and restarted. Same issue. No Lan light, and unit takes minutes to be able to get a login and then is 10 Mbps on the LAN connection and is not stable. Tried other computers and POE same issue. Have upgraded lots of M5 devices with this same system and no issues. Ideas Steve Barnes Wireless Operations Manager New Lisbon Broadband NLBC.COM<http://NLBC.COM> PCSWIN.COM<http://PCSWIN.COM> 765-584-2288 ext:1101<tel:765-584-2288%20ext%3A1101> _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users