EPMP backs off the transmit on the SM automatically. UBNT needs to get on the ball with this feature.
-------------------------------- Tommy A. Digitex.com 817.558.6230 V 817.558.1204 F > On Jan 30, 2017, at 6:20 PM, Jan-OOLLC <j.vank...@oregononline.net> wrote: > > Update, trying to balance the Rx dbm's at the AP first, by decreasing > transmit power at the CPE. Noticed that one of the trouble CPEs was > connecting to another tower with same name SSID even the the signal was 10 > dbm weaker. So I figured if all the CPEs were configured to lock to the AP > mac, they would transfer over to a new name for SSID. Ended up doing a lot > of driving for orphans. Not one of them accepted the new name, all were set > to "lock to AP" mac. I'm pretty sure with older firmware this used to work, > is this a bug? > Have tried airControl2 in the past, could not figure out how to add new CPEs > after initial install. Dude is much easier to use. > Jan > >> On 01/30/2017 12:03 PM, Nick Bright wrote: >>> On 1/28/2017 11:43 AM, Chris Soiles wrote: >>> I have replaced APs and just named them the same with same security and >>> they just connect >>> >>> I.E.: had rocket with Omni named SSID: radio WPA2: 1234 >>> >>> Added a new section, installed 4 APs at New top, named all APs SSID: radio >>> same WPA2 >>> >>> Turned off Omni AP >>> >>> As each CPE connected to new AP >>> Login to CPE change SSID to New name for the radio >>> >>> Once all CPEs gone, change name of AP to New name, they all reconnect >> That's what I do too. If things are working well, you could also use >> airControl2 to do it by batch, but you need to ensure that all the CPE >> have reliable connections and are responding properly first, or they'll get >> orphaned. >> >> -- >> ----------------------------------------------- >> - Nick Bright - >> - Vice President of Technology - >> - Valnet -=- We Connect You -=- - >> - Tel 888-332-1616 x 315 / Fax 620-331-0789 - >> - Web http://www.valnet.net/ - >> ----------------------------------------------- >> - Are your files safe? - >> - Valnet Vault - Secure Cloud Backup - >> - More information & 30 day free trial at - >> - http://www.valnet.net/services/valnet-vault - >> ----------------------------------------------- >> >> This email message and any attachments are intended solely for the use of >> the addressees hereof. This message and any attachments may contain >> information that is confidential, privileged and exempt from disclosure >> under applicable law. If you are not the intended recipient of this message, >> you are prohibited from reading, disclosing, reproducing, distributing, >> disseminating or otherwise using this transmission. If you have received >> this message in error, please promptly notify the sender by reply E-mail and >> immediately delete this message from your system. >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
