We've been seeing throughput drop to shit on clients that are on 6.0.3. So we've rolled back those clients to 6.0
-Mike > On Apr 5, 2017, at 08:24, Clay Stewart <cstew...@scsbroadband.com> wrote: > > Rory, be aware we had issues on 6.0 with total client dropouts, especially > 900s, but also with others. > >> On Fri, Mar 31, 2017 at 12:54 AM, Rory Conaway <r...@triadwireless.net> >> wrote: >> Started updating APs and backhauls to 6.03. >> >> >> >> Started getting calls, users dropping, NetFlix buffering, etc… Found out >> throughput on backhauls went way down. Checked the first backhaul which was >> Powerbeam M5 and PowerBeam 400, xm and xw firmware, it went from 130Mbps to >> 54Mbps on the backhaul even though signal levels were the same, -54/-55dBm. >> Even worse, throughput went to 1Mbps or less. We change it back to 6.0 and >> wham, everything goes back to normal. Not sure what’s going on be we are >> going back to 6.0 on all APs and backhauls. >> >> >> >> >> >> Rory Conaway • Triad Wireless • CEO >> >> 4226 S. 37th Street • Phoenix • AZ 85040 >> >> 602-426-0542 >> >> r...@triadwireless.net >> >> www.triadwireless.net >> >> >> >> “An optimist will tell you the glass is half-full; the pessimist, >> half-empty; and the engineer will tell you the glass is twice the size it >> needs to be” >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
