EPMP elevate and new ePMP AP's. Problem solved. 

Joking, but it will solve the pain. 


--------------------------------
Tommy A.
Digitex.com

817.558.6230 V
817.558.1204 F

> On May 8, 2017, at 5:14 PM, Jan-OOLLC <j.vank...@oregononline.net> wrote:
> 
> ReCap: What I got from this thread is v5.6.15 works ok. (?)  v6.0 drops CPEs, 
> v6.0.3 might cause RX power to drop, by huge amount, v6.0.4 might be usable.  
> v6.0.4 as the AP and v5.6.15 on the CPE.  
> Most of my networks are using NSM2 for CPEs and most APs are RocketM2.  All 
> of my Backbones are PowerBeamM5.  I have a few airGridM2 also.
> 
> I have stability issues.  What firmware will improve things? 
> Jan V
> 
>> On 05/08/2017 02:44 PM, Jan-OOLLC wrote:
>> Whether you are on a mailing list or not, please move your topic to it's own 
>> new topic category and stop hijacking this thread.  You are being rude!
>> Jan V
>> 
>>> On 05/08/2017 01:43 PM, Ben Buie - Gosuto wrote:
>>> Obviously something has gone wonky with WISPA's database or mailing list 
>>> software, as now a ton of people magically got added today without asking 
>>> to be.
>>> 
>>> If anyone on here is actually with the WISPA organization, please reach out 
>>> to your IT peeps and let them know something has gone wrong.
>>> 
>>> Thanks,
>>> 
>>> Ben
>>> 
>>>> On Mon, May 8, 2017 at 4:31 PM, Brian Young <byo...@converge-tech.com> 
>>>> wrote:
>>>> It us because the association software maintains the lists.  To remove 
>>>> yourself, login into your portal at wispa.org, and maintain email 
>>>> preferences.
>>>> 
>>>> 
>>>> 
>>>> Sent from my Sprint Samsung Galaxy S7 edge.
>>>> 
>>>> 
>>>> -------- Original message --------
>>>> From: Mike Hammett <wispaubntus...@ics-il.net>
>>>> Date: 5/8/17 4:24 PM (GMT-05:00)
>>>> To: Ubiquiti Users Group <ubnt_users@wispa.org>
>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>> 
>>>> That doesn't work. WISPA is the only mailman mailing list I know of that 
>>>> doesn't work for.
>>>> 
>>>> 
>>>> 
>>>> -----
>>>> Mike Hammett
>>>> Intelligent Computing Solutions
>>>> 
>>>> Midwest Internet Exchange
>>>> 
>>>> The Brothers WISP
>>>> 
>>>> From: "Josh Luthman" <j...@imaginenetworksllc.com>
>>>> To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
>>>> Sent: Monday, May 8, 2017 3:21:40 PM
>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>> 
>>>> List-Id: Ubiquiti Users Group <ubnt_users.wispa.org>
>>>> List-Unsubscribe: <http://lists.wispa.org/mailman/listinfo/ubnt_users>, 
>>>> <mailto:ubnt_users-requ...@wispa.org?subject=unsubscribe>
>>>> 
>>>> 
>>>> 
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> 
>>>>> On Mon, May 8, 2017 at 4:15 PM, Aram Ter-Martirosyan <a...@connectto.com> 
>>>>> wrote:
>>>>>                 Please remove me from the list
>>>>> 
>>>>>  
>>>>> 
>>>>> Aram Ter-Martirosyan
>>>>> 
>>>>> ConnectTo Communications
>>>>> 
>>>>> http://www.ConnectTo.com
>>>>> 
>>>>> 555 Riverdale, Suite A
>>>>> 
>>>>> Glendale, CA 91204
>>>>> 
>>>>> a...@connectto.com
>>>>> 
>>>>> tel 818.546.4601
>>>>> 
>>>>> fax 818.546.4617
>>>>> 
>>>>>  
>>>>> 
>>>>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] 
>>>>> On Behalf Of Scott Monarco
>>>>> Sent: Monday, May 08, 2017 1:14 PM
>>>>> To: Ubiquiti Users Group
>>>>> 
>>>>> 
>>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>>>  
>>>>> 
>>>>> Please remove me as well
>>>>> 
>>>>> Scott  
>>>>> 
>>>>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] 
>>>>> On Behalf Of Christian Hilliard
>>>>> Sent: Monday, May 8, 2017 1:32 PM
>>>>> To: Ubiquiti Users Group <ubnt_users@wispa.org>
>>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>>> 
>>>>>  
>>>>> 
>>>>> Please remove me as well..
>>>>> 
>>>>> Thank you
>>>>> 
>>>>> Christian Hilliard
>>>>> 
>>>>> Founder
>>>>> 
>>>>> 308-698-1444
>>>>> 
>>>>> chris.hilli...@usacommunications.tv
>>>>> 
>>>>> USACommunications.tv
>>>>> 
>>>>>  
>>>>> 
>>>>> On May 8, 2017, at 2:02 PM, Blake Darling 
>>>>> <bl...@completecommunicationsinc.com> wrote:
>>>>> 
>>>>>  
>>>>> 
>>>>> Please remove me from this thread/group…..
>>>>> 
>>>>>  
>>>>> 
>>>>> Thanks, 
>>>>> 
>>>>>  
>>>>> 
>>>>> Blake 
>>>>> 
>>>>>  
>>>>> 
>>>>> Blake Darling
>>>>> President 
>>>>> 801 647 1111 Office/Cell
>>>>> 866 566 3827 Fax
>>>>> bl...@completecommunicationsinc.com
>>>>> www.completecommunications.com
>>>>> http://lnked.in/completecommunicationsinc
>>>>> Check us out in Enterprise Networking Magazine 2016 SDWWAN Top 10 
>>>>> Companies!
>>>>> http://www.enterprisenetworkingmag.com/vendor/article9/completecommunications
>>>>>  Digital Magazine 
>>>>> Link:http://www.enterprisenetworkingmag.com/magazines/May/2016/
>>>>> 
>>>>>  
>>>>> 
>>>>> On May 8, 2017, at 12:10 PM, James Wilson <ja...@ridgecomms.com> wrote:
>>>>> 
>>>>>  
>>>>> 
>>>>> Odd, UBNT called 6.0.4 beta when they  announced it a non-beta forum...
>>>>> 
>>>>>  
>>>>> 
>>>>> We've installed 6.0.4 in a few APs and STAs in both bridge and router 
>>>>> mode and haven't run into any problems. 
>>>>> 
>>>>>  
>>>>> 
>>>>> On May 8, 2017 2:07 PM, "Jan-OOLLC" <j.vank...@oregononline.net> wrote:
>>>>> 
>>>>> So, we can assume v6.0.4 is beta and we are the test subjects?  Can we 
>>>>> expect a report from whoever is daring enough to deploy?
>>>>> 
>>>>> Jan V
>>>>> 
>>>>> On 05/08/2017 10:52 AM, Ridgetop Networks wrote:
>>>>> 
>>>>> There were issues with stations refusing to reassociate until the AP was 
>>>>> rebooted up to 6.0.3. So far so good with 6.0.4 for me, but it was 
>>>>> infrequent enough in 6.0.3 that I can't confidently say it's fixed in 
>>>>> 6.0.4.
>>>>> 
>>>>>  
>>>>> 
>>>>> On Mon, May 8, 2017 at 10:59 AM Jan-OOLLC <j.vank...@oregononline.net> 
>>>>> wrote:
>>>>> 
>>>>> was the report of an 18dBm drop in RX an error with v6.0.3? 
>>>>> 
>>>>> Jan V
>>>>> 
>>>>> On 05/08/2017 08:47 AM, Clay Stewart wrote:
>>>>> 
>>>>> 6.0 was a double edge sword, it did improve some PtMs, but was dropping 
>>>>> clients randomly. Not seeing that with 6.0.3.
>>>>> 
>>>>>  
>>>>> 
>>>>> On Mon, May 8, 2017 at 11:40 AM, Troy Gibson, Byhalia.net 
>>>>> <t...@byhalia.net> wrote:
>>>>> 
>>>>> I am on 5.6.15 for both XM and XW.  So far working well.  Waiting on 
>>>>> feedback from others on final version 6 updates to use as I did not see 
>>>>> good results when I tested 6.0 so staying clear for now.
>>>>> 
>>>>>  
>>>>> 
>>>>> Troy
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> Sent from my Verizon, Samsung Galaxy smartphone
>>>>> 
>>>>>  
>>>>> 
>>>>> -------- Original message --------
>>>>> 
>>>>> From: Jan-OOLLC <j.vank...@oregononline.net>
>>>>> 
>>>>> Date: 5/8/17 11:22 AM (GMT-05:00)
>>>>> 
>>>>> To: ubnt_users@wispa.org
>>>>> 
>>>>> Subject: Re: [Ubnt_users] Firmware V6.0
>>>>> 
>>>>>  
>>>>> 
>>>>> What is the safest best release to use as of right now?
>>>>> 
>>>>> Jan V
>>>>> 
>>>>> On 05/08/2017 05:33 AM, Clay Stewart wrote:
>>>>> 
>>>>> v6.0.4 is out... have not switch yet here
>>>>> 
>>>>>  
>>>>> 
>>>>> On Sun, May 7, 2017 at 10:27 PM, Scott Lambert <lamb...@lambertfam.org> 
>>>>> wrote:
>>>>> 
>>>>> Just checking, did you also note a drop in modulation to match the drop 
>>>>> in modulation? Just want to make sure the RSSI drop you've observed is 
>>>>> not purely cosmetic.
>>>>> 
>>>>> We are late adopters here, so no experience.
>>>>> 
>>>>>  
>>>>> 
>>>>> On May 7, 2017 4:57:42 PM CDT, Nick Bright <nick.bri...@valnet.net> wrote:
>>>>> 
>>>>> v6.0 is said to have disassociation problems.
>>>>> 
>>>>> I tested v6.0.3 on several sites with a mix of XM/XW (mostly XM) 2.4GHz 
>>>>> hardware. Mostly RM2 AP units, some BulletM2 units. Mostly AirGrid and 
>>>>> PowerBeam SMs.
>>>>> 
>>>>> It was stable, with no disassociation issues, but we had a non-trivial 
>>>>> number of SM units exhibit a *significant* drop in RX signal strength - 
>>>>> but it was not consistent across the AP. We also showed experimentally 
>>>>> that restoring that one SM unit back to 5.6.15 (leaving the AP unit at 
>>>>> 6.0.3) restored the signal strength to the previous level. Some clients 
>>>>> lost as much as 18dBm RX strength.
>>>>> 
>>>>> We chose to go back to 5.6.15 at that point.
>>>>> 
>>>>> On 5/6/2017 5:49 PM, Daniel Peoples wrote:
>>>>> 
>>>>> I sent him XW and XM, if anyone else has other versions, send them over.
>>>>> 
>>>>> 
>>>>> Daniel Peoples
>>>>> Resonance Broadband
>>>>> 
>>>>> Resonancebroadband.com
>>>>> 918-429-3620
>>>>> 
>>>>>  
>>>>> 
>>>>> On Sat, May 6, 2017 at 4:02 PM, Eduardo <eme...@webjogger.com> wrote:
>>>>> 
>>>>> We have currently using v5.6.6 and want to try v6.0.3, was told that v6.0 
>>>>> was more stable.
>>>>> 
>>>>>  
>>>>> 
>>>>> Does someone have the v6.0 firmware?
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> -- 
>>>>> -----------------------------------------------
>>>>> -  Nick Bright                                -
>>>>> -  Vice President of Technology               -
>>>>> -  Valnet -=- We Connect You -=-              -
>>>>> -  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
>>>>> -  Web http://www.valnet.net/                 -
>>>>> -----------------------------------------------
>>>>> - Are your files safe?                        -
>>>>> - Valnet Vault - Secure Cloud Backup          -
>>>>> - More information & 30 day free trial at     -
>>>>> - http://www.valnet.net/services/valnet-vault -
>>>>> -----------------------------------------------
>>>>>  
>>>>> This email message and any attachments are intended solely for the use of 
>>>>> the addressees hereof. This message and any attachments may contain 
>>>>> information that is confidential, privileged and exempt from disclosure 
>>>>> under applicable law. If you are not the intended recipient of this 
>>>>> message, you are prohibited from reading, disclosing, reproducing, 
>>>>> distributing, disseminating or otherwise using this transmission. If you 
>>>>> have received this message in error, please promptly notify the sender by 
>>>>> reply E-mail and immediately delete this message from your system.
>>>>>  
>>>>> 
>>>>> -- 
>>>>> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>  
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>> --
>>>>> 
>>>>> Andrew Kaiser
>>>>> 
>>>>> Ridgetop Networks, LLC
>>>>> 417-543-5513
>>>>> 
>>>>> www.ridgetopnetworks.com
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>>  
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>>>  
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Ubnt_users mailing list
>>>>> Ubnt_users@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Ubnt_users mailing list
>>>> Ubnt_users@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Ubnt_users mailing list
>>>> Ubnt_users@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>> 
>> 
>> _______________________________________________
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
> 
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to