99% time is interference. If 8> difference, you need to drop MCS to single chain.
1% of time it is a bad ant wire... loosen, dirt or water. On Wed, Oct 18, 2017 at 5:06 PM, Rory Conaway <r...@triadwireless.net> wrote: > I agree. Canopy interference on a single polarity is not unusual. We put > up probably 100 of the nanobeams and didn’t see the issues you are > describing. > > > > Rory > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Shawn C. Peppers > *Sent:* Wednesday, October 18, 2017 1:51 PM > > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] Uneven Chains > > > > I have had, many times, interference causing the chains to be off. > > Shawn C. Peppers > > Video Direct > > 866-680-8433 <(866)%20680-8433> Toll Free > > http://www.video-direct.tv > > > On Oct 18, 2017, at 3:45 PM, Ethan E. Dee <e...@globalvision.net> wrote: > > This is not a 19 or 16. > > It is a 300 or 400 dish. > > > > On 10/18/2017 03:08 PM, Phil Curnutt wrote: > > The lobs on the 19 and 16 skittles are big and the beam is not centered, > but I believe points downward. They make horrible PtP's. Alignment. > > > > Phil > > > > On Wed, Oct 18, 2017 at 11:55 AM, Ethan E. Dee <e...@globalvision.net> > wrote: > > What did you replace with? > > > > On 10/18/2017 01:05 PM, Chris J. Ruschmann wrote: > > Single polarity interference? > > Also, we ripped out all our nano beams because of this. > ------------------------------ > > *From:* ubnt_users-boun...@wispa.org <ubnt_users-boun...@wispa.org> > <ubnt_users-boun...@wispa.org> on behalf of Josh Luthman > <j...@imaginenetworksllc.com> <j...@imaginenetworksllc.com> > *Sent:* Monday, October 2, 2017 6:48:00 AM > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] Uneven Chains > > > > 7db difference suggests obstruction, alignment, path, etc > > > > Could always be device too. > > Josh Luthman > Office: 937-552-2340 <%28937%29%20552-2340> > Direct: 937-552-2343 <%28937%29%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Oct 2, 2017 8:46 AM, "Ethan E. Dee" <e...@globalvision.net> wrote: > > Can anyone help? > > No visual physical damage, we have tried alignment twice. > > Also changed the channel. > > No obstructions. > > Tried upgrading firmware. > > Never seen a difference in the chains that was this drastic. > > <Uneven.png> > -- > This message has been scanned for viruses and dangerous content by > *E.F.A. Project* <http://www.efa-project.org>, and is believed to be > clean. > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > -- > Ethan Dee > Network Admin > Globalvision > 864 704 3600 <%28864%29%20704-3600> > e...@globalvision.net > <pfcfcnnhgdbbmlnk.png> > For Support: > gv-supp...@globalvision.net > 864 467 1333 <%28864%29%20467-1333> > > For Sales: > sa...@globalvision.net > 864 467 1333 <%28864%29%20467-1333> > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > -- > Ethan Dee > Network Admin > Globalvision > 864 704 3600 <(864)%20704-3600> > e...@globalvision.net > <jehbfpcjcmdphfke.png> > For Support: > gv-supp...@globalvision.net > 864 467 1333 <(864)%20467-1333> > > For Sales: > sa...@globalvision.net > 864 467 1333 <(864)%20467-1333> > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
