Strange. Did you try another frequency? On Sat, Oct 28, 2017 at 12:29 AM, <mike.l...@gmail.com> wrote:
> Had it happen on both an old rev that was like 3-4 revs behind and the > current XC 8.4.2 > > On Oct 27, 2017, at 21:22, RickG <rgunder...@gmail.com> wrote: > > Which firmware? > > > On Sat, Oct 28, 2017 at 12:14 AM, <mike.l...@gmail.com> wrote: > >> Ran across a weird problem today. I've been running a RP5AC Gen2 (current >> firmware) radio on 120 sector for about the last 6 months on freq 5300 Mhz. >> Its been working great. Until today. >> >> The unit started crashing about every 4 minutes today. I thought it was a >> bad radio so i swapped it with a spare i had of the same model (3-4 revs >> behind in firmware) and it did the same thing. Every 4 minutes or so, it >> would crash. >> >> This sounded like a power problem to me so i replaced all the ends on thw >> cables and swapped the Netonix to a UBNT injector. Same problem. >> >> So i then move the power injector up to the roof and hook it up to the >> radio. All 7 clients connect, comes to the 4 minute point and poof, it >> crashes. >> >> Then i decided to unhook the GPS and both chain 0 and 1 pigtails and the >> radio is fine, doesn't crash at all. >> >> I then hook the sector and GPS back up to the radio and switch to a >> non-DFS channel and all is good. >> >> Crash reports sent to UBNT. >> >> WTF? >> >> -Mike >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > > -- > -RickG > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
