Glen,
I'm about to install Chirp on my new laptop that has USB3 ports. I'll
see if I get the same error as you. In the meantime, try asking over at
Ubuntu Hams.
The Ubuntu Hams wiki is located at:
https://wiki.ubuntu.com/UbuntuHams
73,
Jeremy W0JRL
On 08/13/2016 09:15 AM, Tom Masterson wrote:
You might want to post the question on the chirp users list. I
suspect there may be people there who have had this issue.
Tom
Sent from my iPhone
On Aug 13, 2016, at 07:50, Glenn / Lenny <ger...@cableone.net
<mailto:ger...@cableone.net>> wrote:
I have a follow-up to my previous post, below, I would like to add
that this cable works with Chirp in my Windows 7 computer, but
accessibility is so bad, it is frustrating to use, as you have to
find things with routing the jaws cursor, then getting where you
want, and then routing the PC cursor, and so on.
But I know that this should work in my Ubuntu, as I did the command
lsUSB
and it showed the device on USB hub 001 and it was listed as USB
017 manufacturer Prolific.
So I know now that Ubuntu is seeing the cable.
I tried all the TTY options including USB0.
This computer has only USB-3 ports, and I wonder if Chirp may have
problems with USB-3, or perhaps the cable has difficulty on USB-3?
Usually computers are backward-compatible, so I don't think that is
the problem.
I even went so far as to try:
chmod 777 /dev/USB
but that did not help.
Thanks for any assistance.
Glenn
Date: Fri, 12 Aug 2016 14:17:36 -0500
From: "Glenn / Lenny" <ger...@cableone.net
<mhtml:%7BAC45AB4A-95F3-477C-93EE-6634985EC77A%7Dmid://00000053/%21x-usc:mailto:ger...@cableone.net>>
To: <ubuntu-accessibility@lists.ubuntu.com
<mhtml:%7BAC45AB4A-95F3-477C-93EE-6634985EC77A%7Dmid://00000053/%21x-usc:mailto:ubuntu-accessibility@lists.ubuntu.com>>
Subject: Chirp Software, next problem
Message-ID: <D06566FB7AFD424E9E75C1CD7183617B@LennyAcer5720
<mhtml:%7BAC45AB4A-95F3-477C-93EE-6634985EC77A%7Dmid://00000053/%21x-usc:mailto:D06566FB7AFD424E9E75C1CD7183617B@LennyAcer5720>>
Content-Type: text/plain; charset="iso-8859-1"
Hi All,
Thanks for the assistance so far.
It seems that I have permission to my USB port for programming the
radio after going through setting the dialout command.
But I have a new problem and I wonder if it is the lack of a driver
for this USB cable.
The error is:
an error has occurred
failure to communicate with radio
serial object has no attribute
'setTimeout'
Thanks for any help
--
Ubuntu-accessibility mailing list
Ubuntu-accessibility@lists.ubuntu.com
<mailto:Ubuntu-accessibility@lists.ubuntu.com>
https://lists.ubuntu.com/mailman/listinfo/ubuntu-accessibility
--
Ubuntu-accessibility mailing list
Ubuntu-accessibility@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-accessibility
