Fala chefe! Na luta de sempre?
Então, verifica nas estações Windows se o serviço mensageiro está ativo:
Iniciar -> Executar -> Services.msc -> Mensageiro -> ativar...
Tenho uma rede mista por aki e funciona legal!
Qualquer problema grita nóis!
Abraço!
Atenciosamente
Eduardo Gomes Junior - Tecnologia da Informação
Rio-Tech Engenharia Eletrometalurgia e Projetos ltda
----- Original Message -----
From: "Alan" <[EMAIL PROTECTED]>
To: "Lista de discussão do LoCoTeam Brasileiro" <ubuntu-br@lists.ubuntu.com>
Sent: Wednesday, June 13, 2007 3:11 PM
Subject: Re: [Ubuntu-BR][HELP]Não enxergo micros da rede!!!
Fala, bacana! E aí?
Bom, achei estranho pq não tava achando nenhum dos micros em windows,
dae iniciei o outro no linux e consegui encontrá-lo pelo findsmb, o
mais estranho eh q o resultado do findsmb executado no outro pc com
linux também não enxerga o windows, mas indo em Locais>Rede o windows
aparece!
resultado do findsmb:
*=DMB
+=LMB
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
---------------------------------------------------------------------
192.168.1.8 ALAN-PC +[MSHOME] [Unix] [Samba 3.0.24]
192.168.1.69 GUSTAVO-PC [MSHOME] [Unix] [Samba 3.0.24]
brigadão ae pela atenção!
2007/6/13, Eduardo Gomes Jr. <[EMAIL PROTECTED]>:
> Fala Sr Alan, tudo tranquilo?
>
> Vc, provavelmente está em um rede NetBIOS, certo?
> Vc consegue enxergar a galera usando o comando findsmb?
>
> # findsmb
>
> Se não aparecer o pessoal, verifique o firewall e o serviço mensageiro nos
> rWindow$ da vida...
> Normalmente é só isso.
>
> Outro detalhe: Vc consegue montar os dispositivos deles em sua máquina?
>
> #mount //<IP>/<compartilhamento> /mnt/<pasta> -t smbfs
>
> Vamo vê se a gente consegue matar o problema...
>
> Atenciosamente
>
> Eduardo Gomes Junior - Tecnologia da Informação
> Rio-Tech Engenharia Eletrometalurgia e Projetos ltda
>
> ----- Original Message -----
> From: "Alan" <[EMAIL PROTECTED]>
> To: <ubuntu-br@lists.ubuntu.com>
> Sent: Wednesday, June 13, 2007 12:44 AM
> Subject: [Ubuntu-BR] [HELP]Não enxergo micros da rede!!!
>
>
> Não consigo enxergar nenhum pc da rede!
>
> Minha rede é assim:
> ALAN-PC => Meu PC soh com UBUNTU
> GUSTAVO-PC => PC com Windows VISTA e UBUNTU
> MANEH-PC => PC com Windows XP e Windows VISTA
>
> Todos micros se enxergam e comunicam entre si, inclusive com minha
> máquina!!! Mas não enxergo nenhum deles indo em Locais>Rede também não
> consegui também digitando "smb://nomedopc" no nautilus.
>
> Muito estranho, já que todos me acessam, em todos sistemas
> operacionais e conseguem, inclusive, leitura e escrita das minhas
> pastas compartilhadas, somente eu não vejo nada, não importa qual SO
> seja!
>
> Alguém tem idéia do que está faltando?
>
> Vou postar o conteúdo do meu smb.conf e o resultado do comando smbtree
> logo abaixo:
>
> ============================================================================
> Conteúdo do meu smb.conf:
> #
> # Sample configuration file for the Samba suite for Debian GNU/Linux.
> #
> #
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options most of which
> # are not shown in this example
> #
> # Any line which starts with a ; (semi-colon) or a # (hash)
> # is a comment and is ignored. In this example we will use a #
> # for commentary and a ; for parts of the config file that you
> # may wish to enable
> #
> # NOTE: Whenever you modify this file you should run the command
> # "testparm" to check that you have not made any basic syntactic
> # errors.
> #
>
> #======================= Global Settings =======================
>
> [global]
>
> ## Browsing/Identification ###
>
> # Change this to the workgroup/NT-domain name your Samba server will part
> of
> workgroup = MSHOME
>
> # server string is the equivalent of the NT Description field
> server string = %h server (Samba, Ubuntu)
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable its WINS
> Server
> ; wins support = no
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ; wins server = w.x.y.z
>
> # This will prevent nmbd to search for NetBIOS names through DNS.
> dns proxy = no
>
> # What naming service and in what order should we use to resolve host
> names
> # to IP addresses
> ; name resolve order = lmhosts host wins bcast
>
> #### Networking ####
>
> # The specific set of interfaces / networks to bind to
> # This can be either the interface name or an IP address/netmask;
> # interface names are normally preferred
> ; interfaces = 127.0.0.0/8 eth0
>
> # Only bind to the named interfaces and/or networks; you must use the
> # 'interfaces' option above to use this.
> # It is recommended that you enable this feature if your Samba machine is
> # not protected by a firewall or is a firewall itself. However, this
> # option cannot handle dynamic or non-broadcast interfaces correctly.
> ; bind interfaces only = true
>
>
>
> #### Debugging/Accounting ####
>
> # This tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/log.%m
>
> # Put a capping on the size of the log files (in Kb).
> max log size = 1000
>
> # If you want Samba to only log through syslog then set the following
> # parameter to 'yes'.
> ; syslog only = no
>
> # We want Samba to log a minimum amount of information to syslog.
> Everything
> # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
> # through syslog you should set the following parameter to something
> higher.
> syslog = 0
>
> # Do something sensible when Samba crashes: mail the admin a backtrace
> panic action = /usr/share/samba/panic-action %d
>
>
> ####### Authentication #######
>
> # "security = user" is always a good idea. This will require a Unix
> account
> # in this server for every user accessing the server. See
> # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
> # in the samba-doc package for details.
> security = share
>
> # You may wish to use password encryption. See the section on
> # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
> encrypt passwords = true
>
> # If you are using encrypted passwords, Samba will need to know what
> # password database type you are using.
> passdb backend = tdbsam
>
> obey pam restrictions = yes
>
> ; guest account = nobody
> invalid users = root
>
> # This boolean parameter controls whether Samba attempts to sync the Unix
> # password with the SMB password when the encrypted SMB password in the
> # passdb is changed.
> ; unix password sync = no
>
> # For Unix password sync to work on a Debian GNU/Linux system, the
> following
> # parameters must be set (thanks to Ian Kahan
> <<[EMAIL PROTECTED]> for
> # sending the correct chat script for the passwd program in Debian Sarge).
> passwd program = /usr/bin/passwd %u
> passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
> *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully*
> .
>
> # This boolean controls whether PAM will be used for password changes
> # when requested by an SMB client instead of the program listed in
> # 'passwd program'. The default is 'no'.
> ; pam password change = no
>
> ########## Domains ###########
>
> # Is this machine able to authenticate users. Both PDC and BDC
> # must have this setting enabled. If you are the BDC you must
> # change the 'domain master' setting to no
> #
> ; domain logons = yes
> #
> # The following setting only takes effect if 'domain logons' is set
> # It specifies the location of the user's profile directory
> # from the client point of view)
> # The following required a [profiles] share to be setup on the
> # samba server (see below)
> ; logon path = \\%N\profiles\%U
> # Another common choice is storing the profile in the user's home
> directory
> ; logon path = \\%N\%U\profile
>
> # The following setting only takes effect if 'domain logons' is set
> # It specifies the location of a user's home directory (from the client
> # point of view)
> ; logon drive = H:
> ; logon home = \\%N\%U
>
> # The following setting only takes effect if 'domain logons' is set
> # It specifies the script to run during logon. The script must be stored
> # in the [netlogon] share
> # NOTE: Must be store in 'DOS' file format convention
> ; logon script = logon.cmd
>
> # This allows Unix users to be created on the domain controller via the
> SAMR
> # RPC pipe. The example command creates a user account with a disabled
> Unix
> # password; please adapt to your needs
> ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos
> ""
> %u
>
> ########## Printing ##########
>
> # If you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
> ; load printers = yes
>
> # lpr(ng) printing. You may wish to override the location of the
> # printcap file
> ; printing = bsd
> ; printcap name = /etc/printcap
>
> # CUPS printing. See also the cupsaddsmb(8) manpage in the
> # cupsys-client package.
> ; printing = cups
> ; printcap name = cups
>
> # When using [print$], root is implicitly a 'printer admin', but you can
> # also give this right to other users to add drivers and set printer
> # properties
> ; printer admin = @lpadmin
>
>
> ############ Misc ############
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ; include = /home/samba/etc/smb.conf.%m
>
> # Most people will find that this option gives better performance.
> # See smb.conf(5) and
> /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
> # for details
> # You may want to add the following on a Linux system:
> # SO_RCVBUF=8192 SO_SNDBUF=8192
> socket options = TCP_NODELAY
>
> # The following parameter is useful only if you have the linpopup package
> # installed. The samba maintainer and the linpopup maintainer are
> # working to ease installation and configuration of linpopup and samba.
> ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
>
> # Domain Master specifies Samba to be the Domain Master Browser. If this
> # machine will be configured as a BDC (a secondary logon server), you
> # must set this to 'no'; otherwise, the default behavior is recommended.
> ; domain master = auto
>
> # Some defaults for winbind (make sure you're not using the ranges
> # for something else.)
> ; idmap uid = 10000-20000
> ; idmap gid = 10000-20000
> ; template shell = /bin/bash
>
> #======================= Share Definitions =======================
>
> # Un-comment the following (and tweak the other settings below to suit)
> # to enable the default home directory shares. This will share each
> # user's home directory as \\server\username
> ;[homes]
> ; comment = Home Directories
> ; browseable = no
>
> # By default, \\server\username shares can be connected to by anyone
> # with access to the samba server. Un-comment the following parameter
> # to make sure that only "username" can connect to \\server\username
> ; valid users = %S
>
> # By default, the home directories are exported read-only. Change next
> # parameter to 'yes' if you want to be able to write to them.
> ; writable = no
>
> # File creation mask is set to 0600 for security reasons. If you want to
> # create files with group=rw permissions, set next parameter to 0664.
> ; create mask = 0600
>
> # Directory creation mask is set to 0700 for security reasons. If you want
> to
> # create dirs. with group=rw permissions, set next parameter to 0775.
> ; directory mask = 0700
>
> # Un-comment the following and create the netlogon directory for Domain
> Logons
> # (you need to configure Samba to act as a domain controller too.)
> ;[netlogon]
> ; comment = Network Logon Service
> ; path = /home/samba/netlogon
> ; guest ok = yes
> ; writable = no
> ; share modes = no
>
> # Un-comment the following and create the profiles directory to store
> # users profiles (see the "logon path" option above)
> # (you need to configure Samba to act as a domain controller too.)
> # The path below should be writable by all users so that their
> # profile directory may be created the first time they log on
> ;[profiles]
> ; comment = Users profiles
> ; path = /home/samba/profiles
> ; guest ok = no
> ; browseable = no
> ; create mask = 0600
> ; directory mask = 0700
>
> wins support = no
> [printers]
> comment = All Printers
> browseable = no
> path = /var/spool/samba
> printable = yes
> public = no
> writable = no
> create mode = 0700
>
> # Windows clients look for this share name as a source of downloadable
> # printer drivers
> [print$]
> comment = Printer Drivers
> path = /var/lib/samba/printers
> browseable = yes
> read only = yes
> guest ok = no
> # Uncomment to allow remote administration of Windows print drivers.
> # Replace 'ntadmin' with the name of the group your admin users are
> # members of.
> ; write list = root, @ntadmin
>
> # A sample share for sharing your CD-ROM with others.
> ;[cdrom]
> ; comment = Samba server's CD-ROM
> ; writable = no
> ; locking = no
> ; path = /cdrom
> ; public = yes
>
> # The next two parameters show how to auto-mount a CD-ROM when the
> # cdrom share is accesed. For this to work /etc/fstab must contain
> # an entry like this:
> #
> # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
> #
> # The CD-ROM gets unmounted automatically after the connection to the
> #
> # If you don't want to use auto-mounting/unmounting make sure the CD
> # is mounted on /cdrom
> #
> ; preexec = /bin/mount /cdrom
> ; postexec = /bin/umount /cdrom
>
>
> [Arquivos Antigos]
> path = /media/sdb1/Arquivos Antigos
> available = yes
> browsable = yes
> public = yes
> writable = yes
> ==============================================================================
>
> Resultado de quando digito smbtree no terminal:
> WORKGROUP
> \\GUSTAVO-PC
> \\GUSTAVO-PC\utorrent
> \\GUSTAVO-PC\Users
> \\GUSTAVO-PC\Public
> \\GUSTAVO-PC\Músicas
> \\GUSTAVO-PC\Jogos
> \\GUSTAVO-PC\IPC$ IPC remoto
> \\GUSTAVO-PC\Downloads
> \\GUSTAVO-PC\D$ Recurso compartilhado padrão
> \\GUSTAVO-PC\D
> \\GUSTAVO-PC\Conversores
> \\GUSTAVO-PC\C$ Recurso compartilhado padrão
> \\GUSTAVO-PC\ADMIN$ Administração remota
> MSHOME
> \\MANEH-PC
> cli_start_connection: failed to connect to MANEH-PC<20> (0.0.0.0)
> \\ALAN-PC alan-pc server (Samba, Ubuntu)
> \\ALAN-PC\IPC$ IPC Service (alan-pc server (Samba, Ubuntu))
> \\ALAN-PC\Arquivos Antigos
> \\ALAN-PC\print$ Printer Drivers
>
> ============================================================================
>
> Muito Obrigado!
>
> --
> Interessado em aprender mais sobre o Ubuntu em português?
> http://wiki.ubuntu-br.org/ComeceAqui -
> ubuntu-br mailing list
> ubuntu-br@lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>
>
> --
> Interessado em aprender mais sobre o Ubuntu em português?
> http://wiki.ubuntu-br.org/ComeceAqui -
> ubuntu-br mailing list
> ubuntu-br@lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>
--
Interessado em aprender mais sobre o Ubuntu em português?
http://wiki.ubuntu-br.org/ComeceAqui -
ubuntu-br mailing list
ubuntu-br@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
--
Interessado em aprender mais sobre o Ubuntu em português?
http://wiki.ubuntu-br.org/ComeceAqui -
ubuntu-br mailing list
ubuntu-br@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
