Pois é, se depois de determinar que o autoreconhecimento da placa de TV do Ubuntu falhou é hora de especificar no momento de boot que voce deseja usar parametros diferentes do autoreconhecimento da placa PixelView. Dê um ALT+F2 e execute :
gksu gedit /etc/modprobe.d/bttv e coloque o seguinte conteúdo : options bttv card=37 tuner=38 radio=1 remote=1 mas voce pode usar também os parametros que você usava antes no fedora. Os acima, são para minha pixelview, cujo controle remoto não funciona. 2008/12/17 Jussara&Afonso <jussaravar...@ig.com.br>: > Ola a todos. > > Instalei o Ubuntu 8.10 amd64 e não estou conseguindo fazer a minha placa > pixel View funcionar. > > Eu utilizava ela no Fedora com o comando modprobe bttv card=37 tuner=2 > radio=1 e funcionava de primeira. > > > No ubuntu, configurando o arquivo /etc/modprobe/bttv, o sistema > reconhece a placa: > > lspci: > > 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > Flags: bus master, medium devsel, latency 64, IRQ 18 > Memory at f8ffe000 (32-bit, prefetchable) [size=4K] > Capabilities: <access denied> > Kernel driver in use: bttv > Kernel modules: bttv > > 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > Flags: bus master, medium devsel, latency 64, IRQ 5 > Memory at f8fff000 (32-bit, prefetchable) [size=4K] > Capabilities: <access denied> > > > /etc/modprobe.d$ dmesg | grep bttv > [ 12.264687] bttv: driver version 0.9.17 loaded > [ 12.264690] bttv: using 8 buffers with 2080k (520 pages) each for capture > [ 12.283481] bttv: Bt8xx card found (0). > [ 12.283494] bttv 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 12.283502] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency: > 64, mmio: 0xf8ffe000 > [ 12.283511] bttv0: using: Prolink PixelView PlayTV pro > [card=37,insmod option] > [ 12.283536] bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init] > [ 12.283586] bttv0: tuner type=2 > [ 12.283588] bttv0: i2c: checking for TDA9875 @ 0xb0... not found > [ 12.284198] bttv0: i2c: checking for TDA7432 @ 0x8a... not found > [ 12.530063] bttv0: registered device video0 > [ 12.530084] bttv0: registered device vbi0 > [ 12.530104] bttv0: registered device radio0 > [ 12.530123] bttv0: PLL: 28636363 => 35468950 .. ok > [ 259.263365] bttv0: PLL can sleep, using XTAL (28636363). > > Mas o sistema não cria o /dev/radio0 e o /dev/video0 > > O comando ./MAKEDEV > r...@cerberus:/dev# ./MAKEDEV /dev/radio radio > udev active, devices will be created in /dev/.static/dev/ > ./MAKEDEV: don't know how to make device "/dev/radio" > > Como devo proceder? > Grato Afonso. > > > > -- > Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece > > Lista de discussão Ubuntu Brasil > Histórico, descadastramento e outras opções: > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br > -- Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece Lista de discussão Ubuntu Brasil Histórico, descadastramento e outras opções: https://lists.ubuntu.com/mailman/listinfo/ubuntu-br