I attach the contents of /var/log/dmesg =

[17179569.184000] Linux version 2.6.15-27-386 ([EMAIL PROTECTED]) (gcc version 
4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003f000000 (usable)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 112MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 258048
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 28672 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: Unable to locate RSDP
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 
3f000000:bfc00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Found and enabled local APIC!
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[    0.000000] Detected 1992.286 MHz processor.
[   14.188673] Using tsc for high-res timesource
[   14.189876] Console: colour VGA+ 80x25
[   14.191001] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   14.192699] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   14.227243] Memory: 1012648k/1032192k available (1976k kernel code, 18804k 
reserved, 606k data, 288k init, 114688k highmem)
[   14.227248] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   14.303258] Calibrating delay using timer specific routine.. 3993.28 
BogoMIPS (lpj=7986563)
[   14.303298] Security Framework v1.0.0 initialized
[   14.303310] SELinux:  Disabled at boot.
[   14.303325] Mount-cache hash table entries: 512
[   14.303463] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 
00000000 00000000 00000000 00000000
[   14.303470] CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 
00000000 00000000 00000000 00000000
[   14.303477] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   14.303480] CPU: L2 Cache: 256K (64 bytes/line)
[   14.303482] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 
00000000 00000000 00000000
[   14.303502] mtrr: v2.0 (20020519)
[   14.303506] CPU: AMD Sempron(tm)   2800+ stepping 00
[   14.303510] Enabling fast FPU save and restore... done.
[   14.303512] Enabling unmasked SIMD FPU exception support... done.
[   14.303516] Checking 'hlt' instruction... OK.
[   14.319520] checking if image is initramfs... it is
[   14.850675] Freeing initrd memory: 6614k freed
[   14.970237] NET: Registered protocol family 16
[   14.970268] EISA bus registered
[   14.974456] PCI: PCI BIOS revision 2.10 entry at 0xfb510, last bus=1
[   14.974466] PCI: Using configuration type 1
[   14.974907] ACPI: Subsystem revision 20051216
[   14.974909] ACPI: Interpreter disabled.
[   14.974913] Linux Plug and Play Support v0.97 (c) Adam Belay
[   14.974920] pnp: PnP ACPI: disabled
[   14.974924] PnPBIOS: Scanning system for PnP BIOS support...
[   14.975361] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf60
[   14.975370] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf90, dseg 0xf0000
[   14.976306] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[   14.976319] PCI: Probing PCI hardware
[   14.976323] PCI: Probing PCI hardware (bus 00)
[   14.977021] Boot video device is 0000:01:00.0
[   14.977975] PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
[   14.983164] spurious 8259A interrupt: IRQ7.
[   14.999025] PCI: Bridge: 0000:00:01.0
[   14.999027]   IO window: disabled.
[   14.999031]   MEM window: dc000000-ddffffff
[   14.999035]   PREFETCH window: d8000000-dbffffff
[   14.999051] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   14.999440] audit: initializing netlink socket (disabled)
[   14.999450] audit(1162416301.276:1): initialized
[   14.999519] highmem bounce pool size: 64 pages
[   14.999586] VFS: Disk quotas dquot_6.5.1
[   14.999613] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   14.999683] Initializing Cryptographic API
[   14.999687] io scheduler noop registered
[   14.999695] io scheduler anticipatory registered
[   14.999700] io scheduler deadline registered
[   14.999708] io scheduler cfq registered
[   14.999727] PCI: Bypassing VIA 8237 APIC De-Assert Message
[   14.999884] isapnp: Scanning for PnP cards...
[   15.353572] isapnp: No Plug & Play device found
[   15.365638] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[   15.365643] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   15.373842] serio: i8042 AUX port at 0x60,0x64 irq 12
[   15.374688] serio: i8042 KBD port at 0x60,0x64 irq 1
[   15.374848] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ 
sharing enabled
[   15.374971] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   15.376632] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   15.377055] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[   15.377151] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   15.377155] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[   15.377403] mice: PS/2 mouse device common for all mice
[   15.379098] EISA: Probing bus 0 at eisa.0
[   15.379137] EISA: Detected 0 cards.
[   15.379195] NET: Registered protocol family 2
[   15.419543] input: AT Translated Set 2 keyboard as /class/input/input0
[   15.429115] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   15.429378] TCP established hash table entries: 131072 (order: 7, 524288 
bytes)
[   15.430380] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   15.430847] TCP: Hash tables configured (established 131072 bind 65536)
[   15.430850] TCP reno registered
[   15.430952] TCP bic registered
[   15.430958] NET: Registered protocol family 1
[   15.430967] NET: Registered protocol family 8
[   15.430970] NET: Registered protocol family 20
[   15.430992] Using IPI Shortcut mode
[   15.431034] Freeing unused kernel memory: 288k freed
[   15.478897] vga16fb: initializing
[   15.478904] vga16fb: mapped to 0xc00a0000
[   15.613190] Console: switching to colour frame buffer device 80x25
[   15.613196] fb0: VGA16 VGA frame buffer device
[   16.629800] Capability LSM initialized
[   17.313206] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[   17.313232] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 0
[   17.313359] VP_IDE: chipset revision 6
[   17.313362] VP_IDE: not 100% native mode: will probe irqs later
[   17.313374] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on 
pci0000:00:0f.0
[   17.313385]     ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, 
hdb:DMA
[   17.313402]     ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, 
hdd:pio
[   17.313415] Probing IDE interface ide0...
[   17.728530] hda: ST3160021A, ATA DISK drive
[   18.175640] hdb: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
[   18.232103] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   18.232407] Probing IDE interface ide1...
[   18.805049] hda: max request size: 1024KiB
[   18.813188] hda: Host Protected Area detected.
[   18.813191]  current capacity is 295231450 sectors (151158 MB)
[   18.813192]  native  capacity is 312581808 sectors (160041 MB)
[   18.813824] hda: Host Protected Area disabled.
[   18.813830] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, 
CHS=19457/255/63, UDMA(100)
[   18.813990] hda: cache flushes supported
[   18.814182]  hda: hda1 hda2 < hda5 >
[   18.856302] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, 
UDMA(66)
[   18.856313] Uniform CD-ROM driver Revision: 3.20
[   19.096042] usbcore: registered new driver usbfs
[   19.096342] usbcore: registered new driver hub
[   19.098086] USB Universal Host Controller Interface driver v2.3
[   19.098431] PCI: Found IRQ 11 for device 0000:00:10.0
[   19.098450] PCI: Sharing IRQ 11 with 0000:00:10.1
[   19.098472] PCI: Sharing IRQ 11 with 0000:00:12.0
[   19.098486] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   19.098981] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus 
number 1
[   19.098995] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000cc00
[   19.099352] hub 1-0:1.0: USB hub found
[   19.099365] hub 1-0:1.0: 2 ports detected
[   19.201713] PCI: Found IRQ 11 for device 0000:00:10.1
[   19.201730] PCI: Sharing IRQ 11 with 0000:00:10.0
[   19.201755] PCI: Sharing IRQ 11 with 0000:00:12.0
[   19.201770] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   19.201877] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus 
number 2
[   19.201887] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d000
[   19.202124] hub 2-0:1.0: USB hub found
[   19.202137] hub 2-0:1.0: 2 ports detected
[   19.305398] PCI: Found IRQ 5 for device 0000:00:10.2
[   19.305422] PCI: Sharing IRQ 5 with 0000:00:10.3
[   19.305442] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   19.305531] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus 
number 3
[   19.305538] uhci_hcd 0000:00:10.2: irq 5, io base 0x0000d400
[   19.305768] hub 3-0:1.0: USB hub found
[   19.305779] hub 3-0:1.0: 2 ports detected
[   19.409189] PCI: Found IRQ 5 for device 0000:00:10.3
[   19.409210] PCI: Sharing IRQ 5 with 0000:00:10.2
[   19.409232] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   19.409337] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus 
number 4
[   19.409343] uhci_hcd 0000:00:10.3: irq 5, io base 0x0000d800
[   19.409568] hub 4-0:1.0: USB hub found
[   19.409579] hub 4-0:1.0: 2 ports detected
[   19.516137] PCI: Found IRQ 10 for device 0000:00:10.4
[   19.516149] PCI: Sharing IRQ 10 with 0000:00:0b.0
[   19.516177] PCI: Sharing IRQ 10 with 0000:00:11.5
[   19.516202] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   19.516307] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus 
number 5
[   19.516320] ehci_hcd 0000:00:10.4: irq 10, io mem 0xde001000
[   19.516329] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[   19.516438] hub 5-0:1.0: USB hub found
[   19.516451] hub 5-0:1.0: 8 ports detected
[   19.643822] Probing IDE interface ide1...
[   20.265769] Attempting manual resume
[   20.287219] EXT3-fs: mounted filesystem with ordered data mode.
[   20.296072] kjournald starting.  Commit interval 5 seconds
[   20.710502] usb 5-6: new high speed USB device using ehci_hcd and address 3
[   21.101747] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   29.087531] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   29.124610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.147247] Linux agpgart interface v0.101 (c) Dave Jones
[   29.158508] agpgart: Detected VIA KM400/KM400A chipset
[   29.167182] agpgart: AGP aperture is 128M @ 0xd0000000
[   29.645775] Real Time Clock Driver v1.12
[   29.671362] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald 
Becker
[   29.671420] PCI: Found IRQ 11 for device 0000:00:12.0
[   29.671436] PCI: Sharing IRQ 11 with 0000:00:10.0
[   29.671442] PCI: Sharing IRQ 11 with 0000:00:10.1
[   29.675507] eth0: VIA Rhine II at 0x1e000, 00:40:ca:a6:61:5e, IRQ 11.
[   29.676223] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 
Link 45e1.
[   29.845514] PCI: Found IRQ 10 for device 0000:00:11.5
[   29.845525] PCI: Sharing IRQ 10 with 0000:00:0b.0
[   29.845550] PCI: Sharing IRQ 10 with 0000:00:10.4
[   29.845692] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   29.859279] SCSI subsystem initialized
[   29.876719] Initializing USB Mass Storage driver...
[   29.876870] scsi0 : SCSI emulation for USB Mass Storage devices
[   29.876932] usb-storage: device found at 3
[   29.876935] usb-storage: waiting for device to settle before scanning
[   29.876945] usbcore: registered new driver usb-storage
[   29.876948] USB Mass Storage support registered.
[   30.052419] input: PC Speaker as /class/input/input1
[   30.058519] parport: PnPBIOS parport detected.
[   30.058576] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   30.632484] usbcore: registered new driver hiddev
[   30.648690] input: Microsoft Microsoft Optical Mouse by Starck as 
/class/input/input2
[   30.648743] input: USB HID v1.10 Mouse [Microsoft Microsoft Optical Mouse by 
Starck] on usb-0000:00:10.1-1
[   30.648758] usbcore: registered new driver usbhid
[   30.648761] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   30.698483] FDC 0 is a post-1991 82077
[   30.733951] ts: Compaq touchscreen protocol output
[   31.144139] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   31.427470] lp0: using parport0 (interrupt-driven).
[   31.488649] Adding 2980016k swap on /dev/hda5.  Priority:-1 extents:1 
across:2980016k
[   31.608628] EXT3 FS on hda1, internal journal
[   31.809561] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   31.809567] md: bitmap version 4.39
[   32.386410] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL 
PROTECTED]
[   32.446633] NET: Registered protocol family 17
[   33.069041] cdrom: open failed.
[   34.869509]   Vendor: USB2.0    Model: CompactFlashCard  Rev:
[   34.869520]   Type:   Direct-Access                      ANSI SCSI revision: 
00
[   34.870691]   Vendor: USB2.0    Model: SmartMedia/xD     Rev:
[   34.870702]   Type:   Direct-Access                      ANSI SCSI revision: 
00
[   34.872808]   Vendor: USB2.0    Model:  SD/MMC     Card  Rev:
[   34.872818]   Type:   Direct-Access                      ANSI SCSI revision: 
00
[   34.874341]   Vendor: USB2.0    Model: MemoryStick Card  Rev:
[   34.874351]   Type:   Direct-Access                      ANSI SCSI revision: 
00
[   34.882632] usb-storage: device scan complete
[   34.924650] Driver 'sd' needs updating - please use bus_type methods
[   34.929370] sd 0:0:0:0: Attached scsi removable disk sda
[   34.938758] sd 0:0:0:1: Attached scsi removable disk sdb
[   34.951243] sd 0:0:0:2: Attached scsi removable disk sdc
[   34.962688] sd 0:0:0:3: Attached scsi removable disk sdd
[   34.972817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   34.973166] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   34.973527] sd 0:0:0:2: Attached scsi generic sg2 type 0
[   34.973877] sd 0:0:0:3: Attached scsi generic sg3 type 0
[   35.680175] NET: Registered protocol family 10
[   35.680303] lo: Disabled Privacy Extensions
[   35.680466] IPv6 over IPv4 tunneling driver

** Summary changed:

- KDE desktop fails to start after login in gdm
+ Kernel panic

** Description changed:

- KDE desktop fails to start after login in gdm (Ubuntu Dapper Drake 6.06)
+ Ordinateur Fixe UNIKA.  processor 2Ghz, 1Go RAM. Lors du boot sur le CD
+ d'Install Edgy Eft et/ou de la Mise à Jour de Dapper Drake vers Edgy Eft
+ par Internet (FTP), ecran noir avec message suivant: "[88.253534] <0>
+ kernel panic - not syncing : attempted to kill init!"
  
- Computer UNIKA, processor 2Ghz, 1Go RAM, integrated video card
+ VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChr ome]
+ Integrated Video;
  
- /var/log/Xorg.0.log =
+ Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8 237
+ AC97 Audio Controller
  
- error opening /dev/wacom : No such file or directory
- (**) Option "Device" "/dev/wacom"
- (EE) Xf86OpenSerial : cannot open device /dev/wacom
+ Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host B
+ ridge
+ 
+ PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
+ 
+ Communication controller: Agere Systems V.92 56K WinModem
+ 
+ IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82
+ 3x/A/C PIPC Bus Master IDE
+ 
+ Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
+ 
+ ** Affects: linux-source-2.6.17 (Ubuntu)
+     Importance: Undecided
+     Assignee: Chak
+         Status: Needs Info
+ 
+ ** Changed in: linux-source-2.6.17 (Ubuntu)
+     Assignee: (unassigned) => Chak
+ 
+ ** Description changed:
+ 
+ - Ordinateur Fixe UNIKA. Lors du boot sur le CD d'Install Edgy Eft, ecran
+ - noir avec message suivant: "[88.253534] <0> kernel panic - not syncing :
+ - attempted to kill init!"
+ + Ordinateur Fixe UNIKA. Lors du boot sur le CD d'Install Edgy Eft et/ou
+ + de la Mise à Jour de Dapper Drake vers Edgy Eft par Internet (FTP),
+ + ecran noir avec message suivant: "[88.253534] <0> kernel panic - not
+ + syncing : attempted to kill init!"
+ 
+  VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChr ome]
+  Integrated Video;
+ 
+  Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8 237
+  AC97 Audio Controller
+ 
+  Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host B
+  ridge
+ 
+  PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
+ 
+  Communication controller: Agere Systems V.92 56K WinModem
+ 
+  IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82
+  3x/A/C PIPC Bus Master IDE
+ 
+  Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]

** Attachment added: "/var/log/dmesg"
   http://librarian.launchpad.net/4946718/dmesg

** Changed in: linux-source-2.6.17 (Ubuntu)
     Assignee: (unassigned) => Chak
       Status: Unconfirmed => Needs Info

** Summary changed:

- Kernel panic
+ KDE desktop fails to start after login in gdm (Ubuntu Dapper Drake 6.06)

** Description changed:

- Ordinateur Fixe UNIKA.  processor 2Ghz, 1Go RAM. Lors du boot sur le CD
- d'Install Edgy Eft et/ou de la Mise à Jour de Dapper Drake vers Edgy Eft
- par Internet (FTP), ecran noir avec message suivant: "[88.253534] <0>
- kernel panic - not syncing : attempted to kill init!"
+ KDE desktop fails to start after login in gdm (Ubuntu Dapper Drake 6.06)
  
- VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChr ome]
- Integrated Video;
+ Computer UNIKA, processor 2Ghz, 1Go RAM, integrated video card
  
- Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8 237
- AC97 Audio Controller
+ /var/log/Xorg.0.log =
  
- Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host B
- ridge
- 
- PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
- 
- Communication controller: Agere Systems V.92 56K WinModem
- 
- IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82
- 3x/A/C PIPC Bus Master IDE
- 
- Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
- 
- ** Affects: linux-source-2.6.17 (Ubuntu)
-     Importance: Undecided
-     Assignee: Chak
-         Status: Needs Info
- 
- ** Changed in: linux-source-2.6.17 (Ubuntu)
-     Assignee: (unassigned) => Chak
- 
- ** Description changed:
- 
- - Ordinateur Fixe UNIKA. Lors du boot sur le CD d'Install Edgy Eft, ecran
- - noir avec message suivant: "[88.253534] <0> kernel panic - not syncing :
- - attempted to kill init!"
- + Ordinateur Fixe UNIKA. Lors du boot sur le CD d'Install Edgy Eft et/ou
- + de la Mise à Jour de Dapper Drake vers Edgy Eft par Internet (FTP),
- + ecran noir avec message suivant: "[88.253534] <0> kernel panic - not
- + syncing : attempted to kill init!"
- 
-  VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChr ome]
-  Integrated Video;
- 
-  Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8 237
-  AC97 Audio Controller
- 
-  Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host B
-  ridge
- 
-  PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
- 
-  Communication controller: Agere Systems V.92 56K WinModem
- 
-  IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82
-  3x/A/C PIPC Bus Master IDE
- 
-  Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
+ error opening /dev/wacom : No such file or directory
+ (**) Option "Device" "/dev/wacom"
+ (EE) Xf86OpenSerial : cannot open device /dev/wacom

** Changed in: linux-source-2.6.17 (Ubuntu)
Sourcepackagename: linux-source-2.6.17 => gdm

-- 
KDE desktop fails to start after login in gdm (Ubuntu Dapper Drake 6.06)
https://launchpad.net/bugs/69874

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to