I ran "sudo get-edid > edid.dat" again and the file is attached. Below is a
copy of the terminal output from my computer.
-----------------------------------------------------------------------------
[EMAIL PROTECTED]:~/Desktop$ sudo get-edid > edid.dat
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 200
VBE string at 0x11110 "ATI RV200"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
[EMAIL PROTECTED]:~/Desktop$ xxd edid.dat
0000000: ffa2 00ff ffff ff00 4dd9 9003 f24a 7b00 ........M....J{.
0000010: 2f0a 0102 0e25 1b96 eb0c c9a0 5747 9b27 /....%......WG.'
0000020: 1248 4cff ff80 c280 a94f 8159 814f 7159 .HL......O.Y.OqY
0000030: 6159 4559 3159 863d 00c0 5100 3040 40a0 aYEY1Y.=..Q.0@@.
0000040: 1300 6008 1100 001e 0000 00fd 0030 781e ..`..........0x.
0000050: 601e 000a 2020 2020 2020 0000 00fc 0053 `... .....S
0000060: 4f4e 5920 4350 442d 4534 3030 0000 00ff ONY CPD-E400....
0000070: 0038 3038 3031 3134 0a20 2020 2020 00d8 .8080114. ..
[EMAIL PROTECTED]:~/Desktop$
---------------------------------------------------------------------------
I am not using any adapters, KVM, etc. I tried using each option (Option
"IgnoreEDID" and Option "IgnoreDDC") with the default xorg.conf from the
Live CD and no luck. The screen just kept flickering really bad.
Unfortunately I am short on extra hardware and I don't use Windows but I
will attempt to boot from the onboard video card and report those
results soon. Also I removed the Option "PreferredMode" "[EMAIL PROTECTED]"
from the my edited xorg.conf and the resolution is perfect. Please let
me know if you need that xorg.conf and/or that Xorg.0.log. Thanks!
** Attachment added: "edid.dat"
http://launchpadlibrarian.net/17528516/edid.dat
--
[rv200] initial mode is 1280x768 instead of preferred 1280x1024
https://bugs.launchpad.net/bugs/150709
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
