** Description changed: I installed the Edubuntu 8.04.1 add-on to Ubuntu last night and now my Human List Login User list is empty and I can't seem to add back the users that I have set up for the system to this login list. I like this login window so I want to have the user names show up again. Thank you, James + + apt-cache policy gdm bash edubuntu-desktop edubuntu-artwork gives the output of: + gdm: + Installed: 2.20.7-0ubuntu1.1 + Candidate: 2.20.7-0ubuntu1.1 + Version table: + *** 2.20.7-0ubuntu1.1 0 + 500 http://us.archive.ubuntu.com hardy-updates/main Packages + 100 /var/lib/dpkg/status + 2.20.5-0ubuntu3 0 + 500 http://us.archive.ubuntu.com hardy/main Packages + bash: + Installed: 3.2-0ubuntu18 + Candidate: 3.2-0ubuntu18 + Version table: + *** 3.2-0ubuntu18 0 + 500 http://us.archive.ubuntu.com hardy-updates/main Packages + 100 /var/lib/dpkg/status + 3.2-0ubuntu16 0 + 500 http://us.archive.ubuntu.com hardy/main Packages + edubuntu-desktop: + Installed: 1.59 + Candidate: 1.59 + Version table: + *** 1.59 0 + 500 cdrom://Edubuntu 8.04.1 _Hardy Heron_ - Release i386 Binary-1 (20080701.1) hardy/main Packages + 500 http://us.archive.ubuntu.com hardy/main Packages + 100 /var/lib/dpkg/status + edubuntu-artwork: + Installed: 0.1.0-55ubuntu1 + Candidate: 0.1.0-55ubuntu1 + Version table: + *** 0.1.0-55ubuntu1 0 + 500 cdrom://Edubuntu 8.04.1 _Hardy Heron_ - Release i386 Binary-1 (20080701.1) hardy/main Packages + 500 http://us.archive.ubuntu.com hardy/main Packages + 100 /var/lib/dpkg/status + + ##################################################### + cat /etc/gdm/gdm.conf gave the following output (it seems like the terminal window didn't hold all of it and the top part was lost): + + AllowRemoteRoot=false + # This will allow remote timed login. + AllowRemoteAutoLogin=false + # 0 is the most restrictive, 1 allows group write permissions, 2 allows all + # write permissions. + RelaxPermissions=1 + # Check if directories are owned by logon user. Set to false, if you have, for + # example, home directories owned by some other user. + CheckDirOwner=true + # If your HOME is managed by automounter, set to true + SupportAutomount=false + # Number of seconds to wait after a failed login + #RetryDelay=1 + # Maximum size of a file we wish to read. This makes it hard for a user to DoS + # us by using a large file. + #UserMaxFile=65536 + # If true this will basically append -nolisten tcp to every X command line, a + # good default to have (why is this a "negative" setting? because if it is + # false, you could still not allow it by setting command line of any particular + # server). It's probably better to ship with this on since most users will not + # need this and it's more of a security risk then anything else. + # Note: Anytime we find a -query or -indirect on the command line we do not add + # a "-nolisten tcp", as then the query just wouldn't work, so this setting only + # affects truly attached sessions. + DisallowTCP=true + # By default never place cookies if we "detect" NFS. We detect NFS by + # detecting "root-squashing". It seems bad practice to place cookies on things + # that go over the network by default and thus we do not do it by default. + # Sometimes you can however use safe remote filesystems where this is OK and + # you may want to have the cookie in your home directory. + #NeverPlaceCookiesOnNFS=true + # Will cause PAM_DISALLOW_NULL_AUTHTOK to be passed as a flag to + # pam_authenticate and pam_acct_mgmt, disallowing NULL password. This setting + # will only take effect if PAM is being used by GDM. This value will be + # overridden with the value from /etc/default/login if it contains + # "PASSREQ=[YES|NO]" + #PasswordRequired=false + # Specifies the PAM Stack to use, "gdm" by default. + PamStack=gdm + # GDM allows configuration of how ut_line is set when it does utmp/wtmp and + # audit processing. If VT is being used, then ut_line will be set to the + # device associated with the VT. If the console is attached and has a device + # name specified in the [servers] section, then this value will be used. + # Otherwise the value is defaulted to the value specified in UtmpLineAttached + # for attached displays and UtmpLineRemote for remote displays. The value + # can be left empty which means that ut_line will be set to an empty value + # (if not VT and no value specified in the [servers] section. The values + # can contain "%d" which is translated to the DISPLAY value or %h which + # is translated to the hostname. The values for both keys must begin with + # "/dev/". + UtmpLineAttached=/dev/console + UtmpLineRemote= + # If true and the specified UtmpLineAttached or UtmpLineRemote does not exist, + # then create a pseudo-device filename that will be touched when the utmp + # record is updated. Creating such a psuedo-device ensures that programs + # that stat the utmp device associated with ut_line such as finger, last, + # etc. work in a reasonable way. + UtmpPseudoDevice=false + + # XDMCP is the protocol that allows remote login. If you want to log into GDM + # remotely (I'd never turn this on on open network, use ssh for such remote + # usage). You can then run X with -query <thishost> to log in, or + # -indirect <thishost> to run a chooser. Look for the 'Terminal' server type + # at the bottom of this config file. + [xdmcp] + # Distributions: Ship with this off. It is never a safe thing to leave out on + # the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only allow local + # access is another alternative but not the safest. Firewalling port 177 is + # the safest if you wish to have xdmcp on. Read the manual for more notes on + # the security of XDMCP. + Enable=false + # Honor indirect queries, we run a chooser for these, and then redirect the + # user to the chosen host. Otherwise we just log the user in locally. + #HonorIndirect=true + # Maximum pending requests. + #MaxPending=4 + #MaxPendingIndirect=4 + # Maximum open XDMCP sessions at any point in time. + #MaxSessions=16 + # Maximum wait times. + #MaxWait=15 + #MaxWaitIndirect=15 + # How many times can a person log in from a single host. Usually better to + # keep low to fend off DoS attacks by running many logins from a single host. + # This is now set at 2 since if the server crashes then GDM doesn't know for + # some time and wouldn't allow another session. + #DisplaysPerHost=2 + # The number of seconds after which a non-responsive session is logged off. + # Better keep this low. + #PingIntervalSeconds=15 + # The port. 177 is the standard port so better keep it that way. + #Port=177 + # Willing script, none is shipped and by default we'll send hostname system id. + # But if you supply something here, the output of this script will be sent as + # status of this host so that the chooser can display it. You could for + # example send load, or mail details for some user, or some such. + #Willing=/etc/gdm/Xwilling + + [gui] + # The specific gtkrc file we use. It should be the full path to the gtkrc that + # we need. Unless you need a specific gtkrc that doesn't correspond to a + # specific theme, then just use the GtkTheme key. + #GtkRC=/usr/share/themes/Default/gtk-2.0/gtkrc + + # The GTK+ theme to use for the GUI. + GtkTheme=Human + # If to allow changing the GTK+ (widget) theme from the greeter. Currently + # this only affects the standard greeter as the graphical greeter does not yet + # have this ability. + #AllowGtkThemeChange=true + # Comma separated list of themes to allow. These must be the names of the + # themes installed in the standard locations for gtk themes. You can also + # specify 'all' to allow all installed themes. These should be just the + # basenames of the themes such as 'Thinice' or 'LowContrast'. + #GtkThemesToAllow=all + + # Maximum size of an icon, larger icons are scaled down. + #MaxIconWidth=128 + #MaxIconHeight=128 + + [greeter] + # The following options for setting titlebar and setting window position are + # only useful for the standard login (gdmlogin) and are not used by the + # themed login (gdmgreeter). + # + # The standard login has a title bar that the user can move. + #TitleBar=true + # Don't allow user to move the standard login window. Only makes sense if + # TitleBar is on. + #LockPosition=false + # Set a position for the standard login window rather then just centering the + # window. If you enter negative values for the position it is taken as an + # offset from the right or bottom edge. + #SetPosition=false + #PositionX=0 + #PositionY=0 + + # Enable the Face browser. Note that the Browser key is only used by the + # standard login (gdmlogin) program. The Face Browser is enabled in + # the Graphical greeter by selecting a theme that includes the Face + # Browser, such as happygnome-list. The other configuration values that + # affect the Face Browser (MinimalUID, DefaultFace, Include, Exclude, + # IncludeAll, GlobalFaceDir) are used by both the Standard and Themed + # greeter. + Browser=true + # The default picture in the browser. + #DefaultFace=/usr/share/pixmaps/nobody.png + # User ID's less than the MinimalUID value will not be included in the face + # browser or in the gdmselection list for Automatic/Timed login. They will not + # be displayed regardless of the settings for Include and Exclude. + MinimalUID=1000 + # Users listed in Include will be included in the face browser and in the + # gdmsetup selection list for Automatic/Timed login. Users should be separated + # by commas. + #Include= + # Users listed in Exclude are excluded from the face browser and from the + # gdmsetup selection list for Automatic/Timed login. Excluded users will still + # be able to log in, but will have to type their username. Users should be + # separated by commas. + Exclude=nobody + # By default, an empty include list means display no users. By setting + # IncludeAll to true, the password file will be scanned and all users will be + # displayed except users excluded via the Exclude setting and user ID's less + # than MinimalUID. Scanning the password file can be slow on systems with + # large numbers of users and this feature should not be used in such + # environments. The setting of IncludeAll does nothing if Include is set to a + # non-empty value. + IncludeAll=true + # If user or user.png exists in this dir it will be used as his picture. + #GlobalFaceDir=/usr/share/pixmaps/faces/ + + # File which contains the locale we show to the user. Likely you want to use + # the one shipped with GDM and edit it. It is not a standard locale.alias + # file, although GDM will be able to read a standard locale.alias file as well. + LocaleFile=/etc/gdm/locale.conf + # Logo shown in the standard greeter. + Logo=/usr/share/pixmaps/gdmDebianLogo.xpm + # Logo shown on file chooser button in gdmsetup (do not modify this value). + #ChooserButtonLogo=/usr/share/pixmaps/gdm-foot-logo.png + # The standard greeter should shake if a user entered the wrong username or + # password. Kind of cool looking + #Quiver=true + + # The Actions menu (formerly system menu) is shown in the greeter, this is the + # menu that contains reboot, shutdown, suspend, config and chooser. None of + # these is available if this is off. They can be turned off individually + # however. + #SystemMenu=true + # Configuration is available from the system menu of the greeter. + ConfigAvailable=false + # Should the chooser button be shown. If this is shown, GDM can drop into + # chooser mode which will run the xdmcp chooser locally and allow the user to + # connect to some remote host. Local XDMCP does not need to be enabled, + # however. + #ChooserButton=true + + # Welcome is for all console logins and RemoteWelcome is for remote logins + # (through XDMCP). + # DefaultWelcome and DefaultRemoteWelcome set the string for Welcome to + # "Welcome" and for DefaultWelcome to "Welcome to %n", and properly translate + # the message to the appropriate language. Note that %n gets translated to the + # hostname of the machine. These default values can be overridden by setting + # DefaultWelcome and/or DefaultRemoteWelcome to false, and setting the Welcome + # and DefaultWelcome values as desired. Just make sure the strings are in + # utf-8 Note to distributors, if you wish to have a different Welcome string + # and wish to have this translated you can have entries such as + # "Welcome[cs]=Vitejte na %n". + DefaultWelcome=true + DefaultRemoteWelcome=true + #Welcome=Welcome + #RemoteWelcome=Welcome to %n + + # Xinerama screen we use to display the greeter on. Not for true multihead, + # currently only works for Xinerama. + #XineramaScreen=0 + # Background settings for the standard greeter: + # Type can be 0=None, 1=Image & Color, 2=Color, 3=Image + #BackgroundType=2 + #BackgroundImage= + #BackgroundScaleToFit=true + # The Standard greeter (gdmlogin) uses BackgroundColor as the background + # color, while the themed greeter (gdmgreeter) uses GraphicalThemedColor + # as the background color. + BackgroundColor=#dab082 + GraphicalThemedColor=#dab082 + # XDMCP session should only get a color, this is the sanest setting since you + # don't want to take up too much bandwidth + #BackgroundRemoteOnlyColor=true + + # Program to run to draw the background in the standard greeter. Perhaps + # something like an xscreensaver hack or some such. + #BackgroundProgram= + # If this is true then the background program is run always, otherwise it is + # only run when the BackgroundType is 0 (None). + #RunBackgroundProgramAlways=false + # Delay before starting background program + #BackgroundProgramInitialDelay=30 + # Should the background program be restarted if it is exited. + #RestartBackgroundProgram=true + # Delay before restarting background program + #BackgroundProgramRestartDelay=30 + + # Show the Failsafe sessions. These are much MUCH nicer (focus for xterm for + # example) and more failsafe then those supplied by scripts so distros should + # use this rather then just running an xterm from a script. + #ShowGnomeFailsafeSession=true + #ShowXtermFailsafeSession=true + # Normally there is a session type called 'Last' that is shown which refers to + # the last session the user used. If off, we will be in 'switchdesk' mode + # where the session saving stuff is disabled in GDM + #ShowLastSession=true + # Always use 24 hour clock no matter what the locale. + #Use24Clock=auto + # Do not show any visible feedback in the password field. This is standard for + # instance in console, xdm and ssh. + #UseInvisibleInEntry=false + + # These two keys are for the themed greeter (gdmgreeter). Circles is the + # standard shipped theme. If you want GDM to select a random theme from a + # list then provide a list that is delimited by /: to the GraphicalThemes + # key and set GraphicalThemeRand to true. Otherwise use GraphicalTheme + # and specify just one theme. + GraphicalTheme=Human + #GraphicalThemes=bijou/:blueswirl/:circles/:debblue-list/:debblue/:ayo/:debian-dawn/:debian-greeter/:debian/:glassfoot/:hantzley/:happygnome/:industrial/:crystal/:linsta + GraphicalThemeDir=/usr/share/gdm/themes/ + GraphicalThemeRand=false + + # If InfoMsgFile points to a file, the greeter will display the contents of the + # file in a modal dialog box before the user is allowed to log in. + #InfoMsgFile= + # If InfoMsgFile is present then InfoMsgFont can be used to specify the font to + # be used when displaying the contents of the file. + #InfoMsgFont=Sans 24 + + # If SoundOnLogin is true, then the greeter will beep when login is ready for + # user input. If SoundOnLogin is a file and the greeter finds the 'play' + # executable (see daemon/SoundProgram) it will play that file instead of just + # beeping. + #SoundOnLogin=true + SoundOnLoginFile=/usr/share/sounds/question.wav + # If SoundOnLoginSuccess, then the greeter will play a sound (as above) when a + # user successfully logs in. + #SoundOnLoginSuccess=false + #SoundOnLoginSuccessFile= + # If SoundOnLoginFailure, then the greeter will play a sound (as above) when a + # user fails to log in. + #SoundOnLoginFailure=false + #SoundOnLoginFailureFile= + + # Specifies a program to be called by the greeter/login program when the + # initial screen is displayed. The purpose is to provide a hook where files + # used after login can be preloaded to speed performance for the user. The + # program will only be called once only, the first time a greeter is displayed. + # The gdmprefetch command may be used. This utility will load any libraries + # passed in on the command line, or if the argument starts with a "@" + # character, it will process the file assuming it is an ASCII file containing a + # list of libraries, one per line, and load each library in the file. + PreFetchProgram=/usr/lib/gdm/gdmprefetch @/etc/gdm/gdmprefetchlist + + # The chooser is what's displayed when a user wants an indirect XDMCP session, + # or selects Run XDMCP chooser from the system menu + [chooser] + # Default image for hosts. + #DefaultHostImg=/usr/share/pixmaps/nohost.png + # Directory with host images, they are named by the hosts: host or host.png. + HostImageDir=/usr/share/hosts/ + # Time we scan for hosts (well only the time we tell the user we are scanning + # actually, we continue to listen even after this has expired). + #ScanTime=4 + # A comma separated lists of hosts to automatically add (if they answer to a + # query of course). You can use this to reach hosts that broadcast cannot + # reach. + Hosts= + # Broadcast a query to get all hosts on the current network that answer. + Broadcast=true + # Set it to true if you want to send a multicast query to hosts. + Multicast=false + # It is an IPv6 multicast address.It is hardcoded here and will be replaced + # when officially registered xdmcp multicast address of TBD will be available. + #Multicast_Addr=ff02::1 + # Allow adding random hosts to the list by typing in their names. + #AllowAdd=true + + [debug] + # This will cause GDM to send debugging information to the system log, which + # will create a LOT of output. It is not recommended to turn this on for + # normal use, but it can be useful to determine the cause when GDM is not + # working properly. + Enable=false + # This will enable debug messages for accessibilty gesture listeners into the + # syslog. This includes output about key events, mouse button events, and + # pointer motion events. This is useful for figuring out the cause of why the + # gesture listeners may not be working, but is too verbose for general debug. + Gestures=false + + # Attached DISPLAY Configuration + # + [servers] + # This section defines which attached DISPLAYS should be started by GDM by + # default. You can add as many DISPLAYS as desired and they will always be + # started. The key for each entry must be a unique number that cooresponds to + # the DISPLAY number to start the X server. For a typical single-display + # machine, there will only be one entry "0" for DISPLAY ":0". The first word + # in the value corresponds to an X server definition in the "X Server + # Definitions" section of the configuration file. For example, the entry: + # + # 0=Standard + # + # Means that DISPLAY ":0" will start an X server as defined in the + # [server-Standard] section. + # + # The optional device argument is used to specify the device that is associated + # with the DISPLAY. When using Virtual Terminals (VT), this value is ignored + # and GDM will use the correct device name associated with the VT. If not + # using VT, then GDM will use the value specified by this optional argument. + # If the device argument is not defined, then GDM will use the default setting + # for attached displays defined in the UtmpLineAttached configuration option. + # For the main display (typically DISPLAY ":0"), "/dev/console" is a reasonable + # value. For other displays it is probably best to not include this argument + # unless you know the specific device associated with the DISPLAY. The device + # value can contain "%d" which is translated to the DISPLAY value or %h which + # is translated to the hostname. + # + 0=Standard device=/dev/console + + # Example of how to set up DISPLAY :1 to also use Standard. + #1=Standard + + # If you wish to run the XDMCP chooser on the local display use the following + # line + #0=Chooser + + # X Server Definitions + # + # Note: Is your X server not listening to TCP requests? Refer to the + # security/DisallowTCP setting! + + [server-Standard] + name=Standard server + command=/usr/bin/X -br -audit 0 + flexible=true + # Indicates that the X server should be started at a different process + # priority. Values can be any integer value accepted by the setpriority C + # library function (normally between -20 and 20) with 0 being the default. For + # highly interactive applications, -5 yields good responsiveness. The default + # value is 0 and the setpriority function is not called if the value is 0. + + #priority=0 + + # To use this server type you should add -query host or -indirect host to the + # command line. + [server-Terminal] + name=Terminal server + # Add -terminate to make things behave more nicely + command=/usr/bin/X -br -audit 0 -terminate + # Make this not appear in the flexible servers (we need extra params anyway, + # and terminate would be bad for xdmcp choosing). You can make a terminal + # server flexible, but not with an indirect query. If you need flexible + # indirect query server, then you must get rid of the -terminate and the only + # way to kill the flexible server will then be by Ctrl-Alt-Backspace. + flexible=false + # Do not handle this X server for attached displays. + handled=false + + # To use this server type you should add -query host or -indirect host to the + # command line. + [server-Chooser] + name=Chooser server + command=/usr/bin/X -br -audit 0 + # Make this not appear in the flexible servers for now, but if you wish to + # allow a chooser server then make this true. This is the only way to make a + # flexible chooser server that behaves nicely. + flexible=false + # Run the chooser instead of the greeter. When the user chooses a machine they + # will get this same server but run with "-terminate -query hostname". + chooser=true + + [customcommand] + # This section allows you specify up to 10 custom commands. Each of the + # commands can be defined by the seven parameters listed below. In each of the + # descriptions of the parameters N can take on any values between 0 and 9, + # i.e. CustomCommand0=,CustomCommand1=,...,CustomCommand9=. The numbers + # can have gaps as long as they fit within predefined set of 10, and their + # placement order within this section and with respect to each other is + # not important. + # + # CustomCommandN, CustomCommandTextN, CustomCommandLabelN, + # CustomCommandLRLabelN, CustomCommandTooltipN, CustomCommandIsPersistentN + # and CustomCommandNoRestartN should all be defined for a given integer N, + # where N can be a number from 0-9 (if not the default values will be + # assigned except CustomCommandN for which no default exists). + + # Custom command to run. Multiple commands may be specified separated by + # semicolons. GDM will use the first valid command. Examples: + # /sbin/bootwindoze;/usr/bin/bootwindoze, or + # /sbin/runupdate;/usr/local/sbin/runupdate + # + #CustomCommandN= + + # Custom command dialog message that will appear on all warning dialogs. + # This will vary depending on what you want to do. Examples: + # Are you sure you want to restart system into Windoze?, or + # Are you sure you want do do this? + #CustomCommandTextN= + + # Custom command label that will appear as stock label on buttons/menu items. + # This option can't contain any semicolon characters (i.e. ";"). + # Examples: + # _Windoze, or + # _Update Me + #CustomCommandLabelN= + + # Custom command label that will appear as stock label on radio buttons/list + # items. The underscore indicates the mnemonic used with this item. Examples: + # Restart into _Windoze + # Perform system _Update + #CustomCommandLRLabelN= + + # Custom command tooltip. Examples + # Restarts the computer into Windoze + # Updates the computer software to the most recent version(s) + #CustomCommandTooltipN= + + # Custom command persistence option. Setting it to true will allow this + # command to appear outside the login manager, e.g. on the desktop through + # Log Out/Shut Down dialogs. The default value is false. + #CustomCommandIsPersistentN= + + # Custom command gdm/system restart option. Setting it to true will not + # restart gdm after command execution. The default commands (reboot, shut + # down) all reboot the system by default which is why the default setting + # is true. + # In addition when corresponding CustomCommandIsPersistentN option is set to + # true, setting CustomCommandNoRestartN to false will place CustomCommandN + # in the Shut Down dialog set of actions, setting it to true will place + # CustomCommandN in the Log Out dialog set of actions. + #CustomCommandNoRestartN= + # + # Example layout for more than one command: + #CustomCommand0= + #CustomCommandText0= + #CustomCommandLabel0= + #CustomCommandLRLabel0= + #CustomCommandTooltip0= + #CustomCommandIsPersistent0= + #CustomCommandNoRestart0= + # + #CustomCommand1= + #CustomCommandText1= + #CustomCommandLabel1= + #CustomCommandLRLabel1= + #CustomCommandTooltip1= + #CustomCommandIsPersistent1= + #CustomCommandNoRestart1= + # + # and so on + + ##################################################### + cat /etc/gdm/gdm.conf-custom gives the following output: + # GDM Configuration Customization file. + # + # This file is the appropriate place for specifying your customizations to the + # GDM configuration. If you run gdmsetup, it will automatically edit this + # file for you and will cause the daemon and any running GDM GUI programs to + # automatically update with the new configuration. Not all configuration + # options are supported by gdmsetup, so to modify some values it may be + # necessary to modify this file directly by hand. + # + # Older versions of GDM used the "gdm.conf" file for configuration. If your + # system has an old gdm.conf file on the system, it will be used instead of + # this file - so changes made to this file will not take effect. Consider + # migrating your configuration to this file and removing the gdm.conf file. + # + # To hand-edit this file, simply add or modify the key=value combination in + # the appropriate section in the template below. Refer to the comments in the + # /usr/share/gdm/defaults.conf file for information about each option. Also + # refer to the reference documentation. + # + # If you hand edit a GDM configuration file, you should run the following + # command to get the GDM daemon to notice the change. Any running GDM GUI + # programs will also be notified to update with the new configuration. + # + # gdmflexiserver --command="UPDATE_CONFIG <configuration key>" + # + # e.g, the "Enable" key in the "[debug]" section would be "debug/Enable". + # + # You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and + # re-read the new configuration settings. You can also restart GDM by sending + # a HUP or USR1 signal to the daemon. HUP behaves like gdm-restart and causes + # any user session started by GDM to exit immediately while USR1 behaves like + # gdm-safe-restart and will wait until all users log out before restarting GDM. + # + # For full reference documentation see the gnome help browser under + # GNOME|System category. You can also find the docs in HTML form on + # http://www.gnome.org/projects/gdm/ + # + # NOTE: Lines that begin with "#" are considered comments. + # + # Have fun! + + [daemon] + + + [security] + + [xdmcp] + + [gui] + + [greeter] + + + + GraphicalTheme=happygnome-list + + GraphicalThemes=Edubuntu + + + + + + + + + + + + + + + + + + + + + + Include=jgrabbs,julrk,guest + + + + + + + + GraphicalThemeRand=true + + + + + + + + [chooser] + + [debug] + + [servers]
-- Human List Login User List is now empty after Edubuntu add-on to Ubuntu https://bugs.launchpad.net/bugs/269853 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
