[ 0.000000] Linux version 2.6.24-21-generic ([EMAIL PROTECTED]) (gcc version
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Aug 25 17:32:09 UTC 2008 (Ubuntu
2.6.24-21.42-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff50000 (usable)
[ 0.000000] BIOS-e820: 000000006ff50000 - 000000006ff65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006ff65000 - 000000006ff66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006ff66000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 895MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f81b0
[ 0.000000] Entering add_active_range(0, 0, 458576) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 458576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 458576
[ 0.000000] On node 0 totalpages: 458576
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1790 pages used for memmap
[ 0.000000] HighMem zone: 227410 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8240 checksum 0
[ 0.000000] ACPI: RSDP 000F8240, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 6FF5FC98, 0074 (r1 Tsing TONGFANG 6040000 LTP
0)
[ 0.000000] ACPI: FACP 6FF648F8, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_
F4240)
[ 0.000000] ACPI: DSDT 6FF5FD0C, 4B78 (r1 NVIDIA MCP67 6040000 MSFT
3000000)
[ 0.000000] ACPI: FACS 6FF65FC0, 0040
[ 0.000000] ACPI: TCPA 6FF649EC, 0032 (r1 Phoeni x 6040000 TL
0)
[ 0.000000] ACPI: SRAT 6FF64A1E, 00A0 (r1 AMD HAMMER 6040000 AMD
1)
[ 0.000000] ACPI: WDAT 6FF64ABE, 0104 (r1 PTLTD WDATTBL 6040000 LTP
1)
[ 0.000000] ACPI: SSDT 6FF64BC2, 01C4 (r1 PTLTD POWERNOW 6040000 LTP
1)
[ 0.000000] ACPI: SLIC 6FF64D86, 0176 (r1 Tsing TONGFANG 6040000
0)
[ 0.000000] ACPI: MCFG 6FF64EFC, 003C (r1 PTLTD MCFG 6040000 LTP
0)
[ 0.000000] ACPI: HPET 6FF64F38, 0038 (r1 PTLTD HPETTBL 6040000 LTP
1)
[ 0.000000] ACPI: APIC 6FF64F70, 0068 (r1 PTLTD APIC 6040000 LTP
0)
[ 0.000000] ACPI: BOOT 6FF64FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP
1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 454994
[ 0.000000] Kernel command line:
root=UUID=047dd272-31f6-4b51-8537-61eabb7fdcc7 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1700.197 MHz processor.
[ 21.263916] spurious 8259A interrupt: IRQ7.
[ 21.267289] Console: colour VGA+ 80x25
[ 21.267292] console [tty0] enabled
[ 21.267587] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.268033] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.347417] Memory: 1806096k/1834304k available (2177k kernel code, 27036k
reserved, 1006k data, 368k init, 916800k highmem)
[ 21.347426] virtual kernel memory layout:
[ 21.347427] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 21.347428] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.347429] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.347431] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.347432] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 21.347433] .data : 0xc0320514 - 0xc041bdc4 (1006 kB)
[ 21.347435] .text : 0xc0100000 - 0xc0320514 (2177 kB)
[ 21.347438] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 21.347478] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 21.347633] hpet clockevent registered
[ 21.427597] Calibrating delay using timer specific routine.. 3403.90
BogoMIPS (lpj=6807808)
[ 21.427620] Security Framework initialized
[ 21.427626] SELinux: Disabled at boot.
[ 21.427641] AppArmor: AppArmor initialized
[ 21.427645] Failure registering capabilities with primary security module.
[ 21.427654] Mount-cache hash table entries: 512
[ 21.427775] Initializing cgroup subsys ns
[ 21.427780] Initializing cgroup subsys cpuacct
[ 21.427790] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000011f 00000000
[ 21.427799] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 21.427802] CPU: L2 Cache: 256K (64 bytes/line)
[ 21.427805] CPU 0(2) -> Core 0
[ 21.427807] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410
00002001 00000000 0000011f 00000000
[ 21.427817] Compat vDSO mapped to ffffe000.
[ 21.427827] Checking 'hlt' instruction... OK.
[ 21.443896] SMP alternatives: switching to UP code
[ 21.445188] Early unpacking initramfs... done
[ 21.841997] ACPI: Core revision 20070126
[ 21.842069] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 21.846983] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
[ 21.847004] SMP alternatives: switching to SMP code
[ 21.847547] Booting processor 1/1 eip 3000
[ 21.857912] Initializing CPU#1
[ 21.935719] Calibrating delay using timer specific routine.. 3400.35
BogoMIPS (lpj=6800706)
[ 21.935726] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000011f 00000000
[ 21.935733] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 21.935736] CPU: L2 Cache: 256K (64 bytes/line)
[ 21.935738] CPU 1(2) -> Core 1
[ 21.935740] AMD C1E detected late. Force timer broadcast.
[ 21.935742] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410
00002001 00000000 0000011f 00000000
[ 21.935562] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
[ 21.935580] Total of 2 processors activated (6804.25 BogoMIPS).
[ 21.935823] ENABLING IO-APIC IRQs
[ 21.936059] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.975901] Brought up 2 CPUs
[ 21.975952] CPU0 attaching sched-domain:
[ 21.975955] domain 0: span 03
[ 21.975957] groups: 01 02
[ 21.975960] CPU1 attaching sched-domain:
[ 21.975962] domain 0: span 03
[ 21.975964] groups: 02 01
[ 21.976192] net_namespace: 64 bytes
[ 21.976201] Booting paravirtualized kernel on bare hardware
[ 21.976698] Time: 19:42:46 Date: 10/25/08
[ 21.976725] NET: Registered protocol family 16
[ 21.976917] EISA bus registered
[ 21.976922] ACPI: bus type pci registered
[ 21.992861] PCI: PCI BIOS revision 3.00 entry at 0xfde2b, last bus=8
[ 21.992864] PCI: Using configuration type 1
[ 21.992877] Setting up standard PCI resources
[ 21.994598] ACPI: EC: Look up EC in DSDT
[ 21.996209] ACPI: Interpreter enabled
[ 21.996212] ACPI: (supports S0 S3 S4 S5)
[ 21.996225] ACPI: Using IOAPIC for interrupt routing
[ 22.001780] ACPI: EC: non-query interrupt received, switching to interrupt
mode
[ 22.006079] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 22.006082] ACPI: EC: driver started in interrupt mode
[ 22.006145] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.006943] PCI: Transparent bridge - 0000:00:08.0
[ 22.007021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.007104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 22.007132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 22.028103] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0,
disabled.
[ 22.028293] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15)
[ 22.028468] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
[ 22.028642] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0,
disabled.
[ 22.028816] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 22.028991] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 22.029167] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 22.029342] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 22.029521] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23)
*10
[ 22.029695] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 22.029870] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
[ 22.030049] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 22.030224] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23)
*10
[ 22.030400] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23)
*10
[ 22.030575] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 22.030751] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 22.030927] ACPI: PCI Interrupt Link [Z002] (IRQs 16 17 18 19 20 21 22 23) *5
[ 22.031106] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23)
*10
[ 22.031286] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 22.031438] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.031472] pnp: PnP ACPI init
[ 22.031480] ACPI: bus type pnp registered
[ 22.035341] pnp: PnP ACPI: found 12 devices
[ 22.035344] ACPI: ACPI bus type pnp unregistered
[ 22.035347] PnPBIOS: Disabled by ACPI PNP
[ 22.035599] PCI: Using ACPI for IRQ routing
[ 22.035602] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 22.068133] NET: Registered protocol family 8
[ 22.068135] NET: Registered protocol family 20
[ 22.068174] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 22.068178] hpet0: 3 32-bit timers, 25000000 Hz
[ 22.069224] AppArmor: AppArmor Filesystem Enabled
[ 22.071748] Time: hpet clocksource has been installed.
[ 22.071754] Clockevents: could not switch to one-shot mode: lapic is not
functional.
[ 22.071757] Could not switch to high resolution mode on CPU 0
[ 22.076123] Clockevents: could not switch to one-shot mode: lapic is not
functional.
[ 22.076127] Could not switch to high resolution mode on CPU 1
[ 22.084160] system 00:02: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 22.084167] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 22.084170] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 22.084173] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 22.084175] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 22.084178] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 22.084181] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 22.084188] system 00:06: ioport range 0x360-0x361 has been reserved
[ 22.084191] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 22.084200] system 00:0b: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 22.084204] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 22.084207] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 22.084210] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 22.084213] system 00:0b: iomem range 0xfec80000-0xfec80fff has been reserved
[ 22.084216] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 22.114660] PCI: Bridge: 0000:00:08.0
[ 22.114662] IO window: disabled.
[ 22.114666] MEM window: b3000000-b30fffff
[ 22.114669] PREFETCH window: disabled.
[ 22.114672] PCI: Bridge: 0000:00:0c.0
[ 22.114674] IO window: 4000-4fff
[ 22.114677] MEM window: b3200000-b33fffff
[ 22.114679] PREFETCH window: d0000000-d01fffff
[ 22.114690] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 22.114701] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 22.114713] NET: Registered protocol family 2
[ 22.156162] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 22.156463] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 22.157138] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.157469] TCP: Hash tables configured (established 131072 bind 65536)
[ 22.157472] TCP reno registered
[ 22.172224] checking if image is initramfs... it is
[ 22.901345] Freeing initrd memory: 7712k freed
[ 22.901452] Simple Boot Flag at 0x36 set to 0x1
[ 22.902139] audit: initializing netlink socket (disabled)
[ 22.902152] audit(1224963766.552:1): initialized
[ 22.902342] highmem bounce pool size: 64 pages
[ 22.904345] VFS: Disk quotas dquot_6.5.1
[ 22.904418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.904545] io scheduler noop registered
[ 22.904547] io scheduler anticipatory registered
[ 22.904549] io scheduler deadline registered
[ 22.904560] io scheduler cfq registered (default)
[ 22.904591] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 23.331556] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 23.331571] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 23.331586] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 23.331602] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 23.331617] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 23.331631] Boot video device is 0000:00:12.0
[ 23.331755] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 23.331780] assign_interrupt_mode Found MSI capability
[ 23.331801] Allocate Port Service[0000:00:0c.0:pcie00]
[ 23.332037] isapnp: Scanning for PnP cards...
[ 23.684532] isapnp: No Plug & Play device found
[ 23.715616] Real Time Clock Driver v1.12ac
[ 23.715807] hpet_resources: 0xfed00000 is busy
[ 23.715843] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 23.717099] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 23.717170] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 23.717275] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 23.729674] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 23.738550] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.738556] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 23.738559] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 23.738562] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 23.738565] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 23.751356] mice: PS/2 mouse device common for all mice
[ 23.751486] EISA: Probing bus 0 at eisa.0
[ 23.751492] Cannot allocate resource for EISA slot 1
[ 23.751497] Cannot allocate resource for EISA slot 3
[ 23.751499] Cannot allocate resource for EISA slot 4
[ 23.751512] EISA: Detected 0 cards.
[ 23.751515] cpuidle: using governor ladder
[ 23.751517] cpuidle: using governor menu
[ 23.751603] NET: Registered protocol family 1
[ 23.751628] Using IPI No-Shortcut mode
[ 23.751661] registered taskstats version 1
[ 23.751773] Magic number: 12:603:749
[ 23.751778] hash matches device ttyS0
[ 23.751921] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 23.751923] EDD information not available.
[ 23.752152] Freeing unused kernel memory: 368k freed
[ 23.774010] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 25.140775] fuse init (API version 7.9)
[ 25.176548] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 25.176558] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 25.177024] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 25.177032] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 25.177048] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 25.177060] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 25.182607] ACPI: Thermal Zone [THZN] (65 C)
[ 25.399168] usbcore: registered new interface driver usbfs
[ 25.399196] usbcore: registered new interface driver hub
[ 25.410154] usbcore: registered new device driver usb
[ 25.422191] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 25.422559] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 25.422575] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23
(level, low) -> IRQ 16
[ 25.422593] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 25.422598] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 25.422939] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 25.422961] ohci_hcd 0000:00:02.0: irq 16, io mem 0xb0006000
[ 25.480214] usb usb1: configuration #1 chosen from 1 choice
[ 25.480242] hub 1-0:1.0: USB hub found
[ 25.480250] hub 1-0:1.0: 5 ports detected
[ 25.582455] ACPI: PCI Interrupt Link [Z002] enabled at IRQ 22
[ 25.582468] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z002] -> GSI 22
(level, low) -> IRQ 17
[ 25.582484] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 25.582488] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 25.582518] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 2
[ 25.582545] ohci_hcd 0000:00:04.0: irq 17, io mem 0xb0008000
[ 25.640121] usb usb2: configuration #1 chosen from 1 choice
[ 25.640148] hub 2-0:1.0: USB hub found
[ 25.640157] hub 2-0:1.0: 5 ports detected
[ 25.743352] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[ 25.743364] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21
(level, low) -> IRQ 18
[ 25.743378] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 25.743381] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 25.743425] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 3
[ 25.743457] ehci_hcd 0000:00:02.1: debug port 1
[ 25.743461] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 25.743474] ehci_hcd 0000:00:02.1: irq 18, io mem 0xb0007000
[ 25.773814] SCSI subsystem initialized
[ 25.807322] libata version 3.00 loaded.
[ 25.885898] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 25.902874] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 25.903013] usb usb3: configuration #1 chosen from 1 choice
[ 25.903038] hub 3-0:1.0: USB hub found
[ 25.903044] hub 3-0:1.0: 5 ports detected
[ 26.006561] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 20
[ 26.006573] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z003] -> GSI 20
(level, low) -> IRQ 19
[ 26.006588] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 26.006591] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 26.006618] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 4
[ 26.006649] ehci_hcd 0000:00:04.1: debug port 1
[ 26.006653] PCI: cache line size of 64 is not supported by device
0000:00:04.1
[ 26.006665] ehci_hcd 0000:00:04.1: irq 19, io mem 0xb0007400
[ 26.018821] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 26.018954] usb usb4: configuration #1 chosen from 1 choice
[ 26.018982] hub 4-0:1.0: USB hub found
[ 26.018988] hub 4-0:1.0: 5 ports detected
[ 26.125859] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[ 26.126198] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19
[ 26.126210] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 19
(level, low) -> IRQ 20
[ 26.126217] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 26.573607] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 26.646246] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr
04:4b:80:5e:43:ad
[ 26.646252] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim
msi desc-v3
[ 26.646685] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 26.647024] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[ 26.647035] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 18
(level, low) -> IRQ 21
[ 26.647055] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 26.647063] ACPI: PCI interrupt for device 0000:00:09.0 disabled
[ 26.647964] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 26.647977] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK2] -> GSI 10
(level, low) -> IRQ 10
[ 26.699754] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]
MMIO=[b3000000-b30007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 26.704808] pata_amd 0000:00:06.0: version 0.3.10
[ 26.704861] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 26.704934] scsi0 : pata_amd
[ 26.704984] scsi1 : pata_amd
[ 26.705315] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 26.705318] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 26.795876] usb 1-1: configuration #1 chosen from 1 choice
[ 27.009387] usbcore: registered new interface driver hiddev
[ 27.014834] input: USB Mouse as
/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/input/input2
[ 27.037661] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:02.0-1
[ 27.037686] usbcore: registered new interface driver usbhid
[ 27.037690] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 27.045910] ata1.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, CH00, max UDMA/33
[ 27.265710] ata1.00: configured for UDMA/33
[ 27.265749] ata2: port disabled. ignoring.
[ 27.287984] scsi 0:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D CH00
PQ: 0 ANSI: 5
[ 27.287778] ahci 0000:00:09.0: version 3.0
[ 27.287798] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 18
(level, low) -> IRQ 21
[ 27.997197] ieee1394: Host added: ID:BUS[0-00:1023] GUID[5e804b040000ad44]
[ 28.288656] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl IDE mode
[ 28.288662] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
[ 28.288668] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 28.289027] scsi2 : ahci
[ 28.289302] scsi3 : ahci
[ 28.289452] scsi4 : ahci
[ 28.289598] scsi5 : ahci
[ 28.289680] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xb0004100
irq 222
[ 28.289683] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xb0004180
irq 222
[ 28.289687] ata5: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xb0004200
irq 222
[ 28.289689] ata6: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xb0004280
irq 222
[ 28.948594] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.000742] ata3.00: ATA-8: WDC WD1600BEVS-22UST0, 01.01A01, max UDMA/133
[ 29.000745] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 29.001562] ata3.00: configured for UDMA/133
[ 29.324394] ata4: SATA link down (SStatus 0 SControl 300)
[ 29.652219] ata5: SATA link down (SStatus 0 SControl 300)
[ 29.980044] ata6: SATA link down (SStatus 0 SControl 300)
[ 29.979863] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 01.0
PQ: 0 ANSI: 5
[ 29.993261] Driver 'sr' needs updating - please use bus_type methods
[ 30.006082] Driver 'sd' needs updating - please use bus_type methods
[ 30.110385] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 30.110391] Uniform CD-ROM driver Revision: 3.20
[ 30.110447] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 30.110641] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 30.110654] sd 2:0:0:0: [sda] Write Protect is off
[ 30.110656] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.110674] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 30.110719] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 30.110729] sd 2:0:0:0: [sda] Write Protect is off
[ 30.110731] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.110747] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 30.110752] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 30.120165] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 30.156761] sda1 sda2 sda3 sda4
[ 30.181357] sd 2:0:0:0: [sda] Attached SCSI disk
[ 35.929234] kjournald starting. Commit interval 5 seconds
[ 35.929246] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.659153] udevd version 124 started
[ 49.595453] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 49.702244] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 49.734592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 49.866199] input: Power Button (FF) as /devices/virtual/input/input4
[ 49.890067] Linux agpgart interface v0.102
[ 49.906763] nvidia: module license 'NVIDIA' taints kernel.
[ 50.201600] ACPI: Power Button (FF) [PWRF]
[ 50.201723] input: Lid Switch as /devices/virtual/input/input5
[ 50.239968] ACPI: Lid Switch [LID0]
[ 50.240061] input: Power Button (CM) as /devices/virtual/input/input6
[ 50.301522] ACPI: Power Button (CM) [PWRB]
[ 50.301592] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 50.365501] ACPI: Sleep Button (CM) [SLPB]
[ 50.449469] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 50.449474] ricoh-mmc: Copyright(c) Philip Langdale
[ 50.449540] ricoh-mmc: Ricoh MMC controller found at 0000:01:05.2
[1180:0843] (rev 1)
[ 50.449550] ricoh-mmc: Controller is now disabled.
[ 50.485454] sdhci: Secure Digital Host Controller Interface driver
[ 50.485459] sdhci: Copyright(c) Pierre Ossman
[ 50.485517] sdhci: SDHCI controller found at 0000:01:05.1 [1180:0822] (rev
19)
[ 50.485833] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
[ 50.485845] ACPI: PCI Interrupt 0000:01:05.1[B] -> Link [LNK3] -> GSI 11
(level, low) -> IRQ 11
[ 50.485865] sdhci:slot0: Will use DMA mode even though HW doesn't fully
claim to support it.
[ 50.485917] mmc0: SDHCI at 0xb3000800 irq 11 DMA
[ 50.680651] ACPI: Battery Slot [BAT0] (battery present)
[ 50.685777] ACPI: AC Adapter [AC0] (on-line)
[ 50.686140] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 50.733315] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 50.811776] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17
[ 50.811788] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 17
(level, low) -> IRQ 22
[ 50.811796] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 50.812110] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan
22 19:36:58 PST 2008
[ 50.962673] udev: renamed network interface eth0 to eth1
[ 51.533536] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 16
[ 51.533548] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 16
(level, low) -> IRQ 23
[ 51.533574] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 51.995063] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio4/input/input9
[ 53.982872] lp: driver loaded but no devices found
[ 54.498478] Adding 2048276k swap on /dev/sda4. Priority:-1 extents:1
across:2048276k
--
NVIDIA MCP67 chipset's problems with 2.6.27.7 kernel
https://bugs.launchpad.net/bugs/289157
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
