I was able get wifi working by unloading the b43, b44, and ssb drivers in the /etc/rc.local file. Then I reload b43 and ssb which activates the wifi card using b43-fwcutter. I understand that one bug is the sequence in which drivers load in the initialization file.
However, I wanted to test the STA driver and I was reporting the failure to load the STA/wl driver through jockey as the reported bug. Al Erola On Mon, Oct 27, 2008 at 6:43 PM, pstucke <[EMAIL PROTECTED]> wrote: > Like Al Erola, I selected restricted hardware driver for Broadcom STA, > system requested reboot. > Unlike Al, after rebooting, the STA driver is no longer available and I > have no wireless connectivity. I have installed/removed/reinstalled > b43-fwcutter and the ndiswrapper files, but the STA (or the b43) drivers do > not appear in the restricted drivers section. > > After hours of frustration, I wiped my root partition and reinstalled > using the 8.04 alternative CD. I installed b43-fwcutter, the > ndiswrapper files, and all system updates (up till yesterday). Without > installing any of the proprietary drivers, I upgraded to 8.10 RC2. Upon > rebooting, I loaded the jockey GUI, which displayed my nvidia display > driver, along with the STA and b43 drivers. I selected the STA driver > and rebooted. After rebooting again, both wifi drivers disappeared. > > My lspic looks like this (my Broadcom 4312 wifi doesn't register any > longer, and I cannot connect wirelessly): > > 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) > 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) > 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) > 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) > 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) > 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) > 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) > 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) > 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) > 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) > 00:05.0 VGA compatible controller: nVidia Corporation C51 [Geforce 6150 Go] > (rev a2) > 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) > 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) > 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) > 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) > 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) > 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) > 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) > 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev > f1) > 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev > f1) > 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) > 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev > a2) > 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > DRAM Controller > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > 07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller > 07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host > Adapter (rev 19) > 07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a) > 07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host > Adapter (rev 05) > 07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) > > Please let me know what additional debug info you need from me. > > -- > STA/wl driver will not activate > https://bugs.launchpad.net/bugs/289360 > You received this bug notification because you are a direct subscriber > of the bug. > -- Alan Erola -- STA/wl driver will not activate https://bugs.launchpad.net/bugs/289360 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs